Considering: Where to get a full CA Harness

[nightstepper]

I might be looking into getting another full harness for my CA18det b/c the wiring on it done from the previous owner was spliced and cut so many times its hard to figure out what is what, even when i look at the FSM. Anyway, if i dont get everything sorted out within the next 2 weeks then i might aswell buy another one that is not torn to hell.Please help.

[CA19DET]

http://www.ebay.com

[8ggalant]

jspecjhotmost REPUTABLE ca distributors can get u one...

[themadscientist]

I have 75% of one at the moment, it needs some sensors. If you want it I'll do some junkyard hopping and get the missing peices to complete it. I have sold a few of them and I give you everything including the MAF, dropping resistor, coil packs, CAS etc. Drop me an email if you are interested.

[lifelicksballs]

um this is sorta of related kinda but do you know which sensor is the one on the lower harness second to the end...mine came this it half way in and the other half broken off and inside is a spring...do any of you guys know what it might be?

[themadscientist]

post a pic

[NeedCAforS13]

I got my harness and sensors from TMS! absolutely zero problems

Sean

[s13_rb25det]

hi... i have my original uncut harness from my CA18 before i swapped for an RB...

if interested, drop me an email [email protected]

nick

[slownslurious]

fellow nico member has your hook up:

zerothread?id=131590

[nightstepper]

thanks for helping out guys. I do believe however, that i can get it rewired now.

[JDMSIL80]

Here's a full harness selling on ebay:

http://cgi.ebay.com/ebaymotors...QrdZ1