CLUTCH AND FLYWHEEL

[ca18deTbeGinNer]

can anyone help me out please?!?!? my clutch is slipping real bad. does anyone no where to get a clutch and flywheel??

i got a 91 240 with the ca18det in it...

[slideways]

i spokek to brian earlier, welcome to nico

http://www.illegalgarage.com

speak to max misawa i believe his phone number is on there as well.

if not that SPEC makes different stages for the ca18det.

i also have a friend in LA that destributes clutes for HYPER clutch and they are pretty good clutches. a little better than spec if u ask me.

he is on this forum

":Cuzan0:"

you get spec clutches from

http://www.optionimports.com

you can get JDM clutches from

http://www.takakaira.co.jphttp://www.raretrick.com

this site also carries lots of ca18 parts. or some lmao

http://www.speedaction.net/they carry clutches, radiator and hoses for ca.

let me know if u need the number to cuzan0 for the hyper clutches..

all of these range from 300-500

brandon

[slideways]

too lazy to edit sorry foro the doubble post. flywheels would tkae a bit longer BUT u can get them from rare trick. i reccomend staying away from lightweight flywheels on ca and jsut resurface your OEM one.

brandon

[F3600]

i bought one on ebay its a 6 puck clutch its a XTD i think. I bought one for the Ka24E rated 360 lbs/torque.

150 US with everything you need to install it but dont use the release bearing that come with the kit , some people said they didnt last 4000 miles

for the flywheel i cannot tell you just do what slideways replied.

good luck

[sideways danny]

did the KA clutch need modification? I've tried one here in the UK and the bolt spacing and location pins were totally different so didn't fit on the flywheel

i bought one on ebay its a 6 puck clutch its a XTD i think. I bought one for the Ka24E rated 360 lbs/torque.

150 US with everything you need to install it but dont use the release bearing that come with the kit , some people said they didnt last 4000 miles

for the flywheel i cannot tell you just do what slideways replied.

good luck

[F3600]

you need to cut one aligment pin on the flywheel and the cover fit.. you also need to enlarge a litlle each hole for bolting the pressure plate cuz there not perfectly aligned... except of that , everything is fitting well

[ca18deTbeGinNer]

thanks for the info bro...my sh*t is slipping like crazy right now!

[ca18deTbeGinNer]

hey brandon, the clutches your friend sends out in LA, are they the same price as the spec ones?? i need to get one asap!

thanks man.

[float_6969]

They are cheaper. Spec has decent prices for performance clutches IMO. I'm runnging a Stage III w/o problems.

[slideways]

yeah they are a little cheaper.specs are about 345+ for crappy stage 2. i can get them to you for probly the 320 range. llim tryin gto get a hold of him right now. give me a call later today.

1 831 917 8640brandon

[sideways danny]

you need to cut one aligment pin on the flywheel and the cover fit.. you also need to enlarge a litlle each hole for bolting the pressure plate cuz there not perfectly aligned... except of that , everything is fitting well

sounds like the same situation, I was told you could just remove dowel pins and it would bolt on so we shipped one over to test, alright for DIY but no use to sell, cheers for that