CA18Det build \Reliablity \ Power

[Torpor]

Thank Buddie

Glad you guys like it , She will be running 0.5 bar hoping for 240RWHP on this boost setting

[IHeartRPS13]

Wow it's been a while since i floated here. Congrats on the completion. It looks beautiful. Just one thing...are you sure you want to heat wrap the manifold? Wouldn't it crack?

[float_6969]

When are planning on getting to they dyno?

[DALAZ_68]

Hi Guys Sorry for pulling up such a Old thread but I just thought I would give you guys a Update on the CA18DET.

I am Running a Nistne ECU for the management system.440cc InjecotorsZ32 N61 MAF Zeitronix Wideband A/F

Here are some pic's Of the new set-up







This fourm is still one of the best place's for Info on the CA18DET but you guys are welcome to come have a look at our forum is you interested most S13 in south Africa came with a CA18DET so there allot of info here http://200sx.za.net

Thank guys comments are welcome.

dont you mean Z32 N62 Maf

[Torpor]

Thanks for the Help again not paying attention to what I'm typing

OK my Dyno fell through today the shop canceled and will only have place again next week.I was also looking at increasing the Boost from 8 psi to 10psi but my injector are already at 90% duty cycle keeping the car at 11.2 -11.8 AFR to redline so this is out the question for now till I get bigger squirter's again

The Car did get a new toy a 3 inch Megan System (Stand to be corrected)



And A nice pic of the interior and my desperate need fro a blanking plate



Also My new Wish-list is:

Knock-link (Knock sensor)F1 Stage 3 Clutch system from Grip-force Race Rotor from Rotor88Rims (5 spoke)