Broadfield Introduction "B&B"

Post by **Pyrokid** » Sun Jul 20, 2008 8:33 pm

Yep, the 10w1v2. I guess someone just forgot at the plant, it took me a while to figure out what was off about that one.

Thanks again Toby, always a pleasure.

Post by **Zhanshi** » Mon Jul 21, 2008 12:38 am

Could I get a price quote of a Kenwood KDC-MP208 and a Kenwood KDC-MP238 shipped to 96814? Thanks in advance!

Post by **ice_man152** » Tue Jul 22, 2008 4:23 pm

still wanting pics of the hud haha

Post by **Broadfield** » Tue Jul 22, 2008 4:28 pm

Zhanshi wrote:Could I get a price quote of a Kenwood KDC-MP208 and a Kenwood KDC-MP238 shipped to 96814? Thanks in advance!

I thought I had my Kenwood pricing at home, but I was mistaken. I'll have to check when I get to work tomorrow. Sorry I don't know the prices off the top of my head, I don't deal with Kenwood much anymore.

Post by **Broadfield** » Tue Jul 22, 2008 4:33 pm

ice_man152 wrote:still wanting pics of the hud haha

Sorry man! I assume you want pics of the modified one in my car?

Post by **ice_man152** » Wed Jul 23, 2008 5:31 pm

yeah not too much of the clear gauge, but other than that its gorgeous. hats off to ya

Post by **el OCHO** » Thu Jul 24, 2008 6:29 pm

hey how much is it for that digital climate control..do you know where i can get one?

Post by **Broadfield** » Thu Jul 24, 2008 7:50 pm

el OCHO wrote:hey how much is it for that digital climate control..do you know where i can get one?

zerothread?id=239862

Post by **Pyrokid** » Thu Jul 24, 2008 11:40 pm

I have to say Toby, your interior inspired me the first day I saw it. I have wondered two things though, how much work was it to mold the HUD like that, and is that a custom roll cage or pre-made?

Post by **Broadfield** » Fri Jul 25, 2008 3:26 am

The HUD went pretty fast for me. I actually thought it was easier than I initially thought it was going to be. I really don't remember how much time I had into it...... probably about 5 hours or so.

The cage is a 6 point Cusco that is powder coated black. There is also a 3 point welded in between the rear towers.

Post by **Pyrokid** » Sun Jul 27, 2008 6:44 pm

If you don't mind me asking, how did you mold it?And how is the visibility with the 6 point?

Post by **Broadfield** » Mon Jul 28, 2008 2:55 pm

Pyrokid wrote:If you don't mind me asking, how did you mold it?And how is the visibility with the 6 point?

The usual super glue, Kitty Hair, bondo, primer, texture paint and then a finish color.

The 6 pt. blocks nothing! You have no idea it's even there when driving.

Post by **MastaYu** » Thu Aug 07, 2008 10:54 am

ALPINE SPS-406 price shipped to 20876email: [email protected]

Post by **Broadfield** » Thu Aug 07, 2008 1:35 pm

The 406's would run you $69 shipped. However, I do not stock Alpine speakers. So I wouldn't have them until I placed another big Alpine order.

I do stock the Boston Acoustic S75's though. They would run you $75 shipped and are a little nicer than the Alpine 406's.

Thanks,

Toby

Post by **kamikazestorm420** » Sun Aug 10, 2008 2:05 am

how much would it be for the kenwood dnx7120?

do you know if that double din would fit in a s14 without problems?

Post by **Broadfield** » Sun Aug 10, 2008 4:49 am

Sorry, I am no longer a Kenwood dealer. I really only stock the Alpine double DIN's now. You would be looking at the W505 if you went with an Alpine.

http://www.alpine-usa.com/US-e...-W505 Nico Price = $859 Shipped

Post by **kamikazestorm420** » Sun Aug 10, 2008 9:18 pm

[QUOTE=Broadfield]Sorry, I am no longer a Kenwood dealer. I really only stock the Alpine double DIN's now. You would be looking at the W505 if you went with an Alpine.

http://www.alpine-usa.com/US-e...-W505 Nico Price = $859 Shipped

http://www.alpine-usa.com/images/produc ... jpg[/QUOTE]

ok. sounds good. i will have to contact you when i do this.

Post by **Loki** » Thu Aug 21, 2008 5:00 pm

Hey Broadfield. I'm looking for recommendation here, as I'm pretty clueless with car audio. I'm not looking to win audio competitions, just something that'll sound real nice on the drive to work. I definitely want iPod control on it though, as skipping songs is a real PITA on an iTouch. Whether it charges the iPod or not is of no consequence to me. I got about 150-300 to spend. Also looking at a Viper 5900 alarm, but I'm not sure if it'd be overkill for me (is overkill possible on an alarm system?). I know it has a remote start with it, but can you even install remote starters on a manual car?

The biggest thing I'd be worried about is whether I can even install this stuff myself. My original stereo sub and amp got stolen so all the wires have been cut. So I don't know. LMK Toby

Post by **Broadfield** » Sun Aug 24, 2008 11:07 am

Email sent!

Post by **JdrifterCA** » Sat Sep 06, 2008 6:11 am

Hi.. umm i wana get that viper alarm system 1002 is it? My s13 dont have power lock, atleast i dont believe it does cuz all the last owner gave me was a key. Anwways it has a alarm on it alrdy but is disable. Would that be a problem? And also how can i get power lock/keyless to work? Thanks once i got these questions all answer i will probably send u paypal in a week or so after i get my sr20 swap done.

Post by **Sazar** » Sat Sep 13, 2008 4:39 pm

I have a question. Do you carry any audio auxiliary, PAC type products that would work with an Infiniti M45, 2003/2004?

I am looking to stay with the stock stereo and controls but I am looking for a device I can plug into either the SAT or Tape connectors to provide me with Auxiliary connectors?

Do you carry equipment like this?

Thanks

Post by **Broadfield** » Sun Sep 14, 2008 8:56 am

JdrifterCA wrote:Hi.. umm i wana get that viper alarm system 1002 is it? My s13 dont have power lock, atleast i dont believe it does cuz all the last owner gave me was a key. Anwways it has a alarm on it alrdy but is disable. Would that be a problem? And also how can i get power lock/keyless to work? Thanks once i got these questions all answer i will probably send u paypal in a week or so after i get my sr20 swap done.

If you lock the drivers door with the plunger or the key cylinder, does it lock the passenger door? If so, then you have power locks to some degree. Get back to me on that one then I will get you a price on what you will need.

Thanks,

Toby

Sazar wrote:I have a question. Do you carry any audio auxiliary, PAC type products that would work with an Infiniti M45, 2003/2004?

I am looking to stay with the stock stereo and controls but I am looking for a device I can plug into either the SAT or Tape connectors to provide me with Auxiliary connectors?

Do you carry equipment like this?

Thanks

I don't have any options for a M45 that old. If it was a newer one then it wouldn't be a problem. Sorry man!

Post by **Sazar** » Sun Sep 14, 2008 10:00 am

Broad, would you have anything for a Q45 from that time? It would have the same kind of unit installed.

Thanks for the quick response.

Post by **Broadfield** » Tue Sep 16, 2008 3:33 pm

Sorry Sazar, Nissans and Infinitys are tough to work with as far as interfacing goes. I got nothing.

Post by **gregfarz78** » Thu Sep 18, 2008 4:01 pm

I'm looking into the Alpine IDA-x200 or x100 do you have any experience with them or carry them? It has a usb port I was thinking of running a external hard drive with all my music just not sure how well that will work out. Any advice?

Post by **Broadfield** » Fri Sep 19, 2008 4:02 am

I stock the 100 but not the 200. The 200 is far inferior to the 100, so I never sell them. The iPod radios are all about sacrificing CD playback with the added convenience of better iPod control over the standard models. However, anything below the 100 doesn't really have much better control than a standard model. The 100 also has a 24bit D/A converter...... so it will get your MP3 files to sound closer to CD quality. Of course any USB device is easier to control with the 100. It displays more info at one time, making it easier to navigate through your files.

I sell a load of these with no complaints. It is what I use in my S13 and what my salesman has in his Scion. It is a killer unit!

Give me a shout if you want some pricing. I do have it on sale under Alpine HU's in my sig.

Post by **JdrifterCA** » Fri Sep 19, 2008 11:50 am

[QUOTE=Broadfield]

If you lock the drivers door with the plunger or the key cylinder, does it lock the passenger door? If so, then you have power locks to some degree. Get back to me on that one then I will get you a price on what you will need.[quote] Yes when i manually lock my driver side, my passenger locks also.

Post by **Broadfield** » Sat Sep 20, 2008 8:17 am

The 1002 would run you $159 shipped. I include the relay and wiring to interface with your OEM door locks. I will also include vehicle wiring info if you want to install it yourself.

Thanks,

Toby

Post by **redhb240SXS13** » Sun Sep 21, 2008 2:03 pm

Just wondering if you could cut me some kind of deal on a enclosure for two 10" subs. I could get it locally but id rather help out a nico sponsor!

Post by **Broadfield** » Sun Sep 21, 2008 7:54 pm

I can, but shipping is a *****. And there isn't much mark up on pre-fab enclosures. So it would probably be cheaper to get it locally. How much have you been quoted for one? Also, was it a pre-fab or a custom built?

Toby

Broadfield Introduction "B&B"

Re: (Broadfield)

Re: Broadfield Introduction "B&B" (Broadfield)

Re: (Zhanshi)

Re: Broadfield Introduction "B&B" (ice_man152)

Re: Broadfield Introduction "B&B" (Broadfield)

Re: Broadfield Introduction "B&B" (ice_man152)

Re: Broadfield Introduction "B&B" (el OCHO)

Re: Broadfield Introduction "B&B" (Broadfield)

Re: Broadfield Introduction "B&B" (Pyrokid)

Re: Broadfield Introduction "B&B" (Broadfield)

Re: Broadfield Introduction "B&B" (Pyrokid)

Re: Broadfield Introduction "B&B" (Broadfield)

Re: Broadfield Introduction "B&B" (MastaYu)

Re: (kamikazestorm420)

Re: (Broadfield)

Re: (kamikazestorm420)

Re: (Loki)

Re: (Broadfield)

Re: (Pyrokid)

Re: (JdrifterCA)

Re: (Broadfield)

Re: (Sazar)

Re: (gregfarz78)

Re: (Broadfield)

Re: (JdrifterCA)

Re: (Broadfield)

Re: (redhb240SXS13)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums