320 Parts-pretty much all gone now

1962-1965 Datsun L320 and NL320 forums - The truck that started it all in the US. All 320-specific topics and discussion can be found here.
wayok
Posts: 1
Joined: Sun Mar 27, 2011 7:29 am
Car: 1964 NL320 1965 L320

Post

Hello, I could use and would appreciate lots of parts. I need 320 parts. From your pics. the drag link on the steering component pic., windows pic., and radiator would all work for me. My # is 575-882-5424 Thanks, Ward


User avatar
dp320
Posts: 41
Joined: Sun Feb 27, 2011 9:08 pm
Car: 1965 520

Post

Lester,

Looks like I have two carburetors. Right now my truck is using a weber. My thinking is that I'd like to be able to have an original carburetor as I rebuild mine. I haven't yet assessed how complete both of them are.

marblemania
Posts: 6
Joined: Mon May 02, 2011 7:11 am
Car: 1965 L 320

Post

Just joined this site as just purchased a 1965 60HP 1200 pickup. I am in need of a passenger door for this pickup without internals or glass but with side trim piece.
I can repair the one that is one this truck but would rather replace it to save on workload.
Also, any information on engine upgrades as this truck came without an engine.
I'm in Oregon State, USA but willing to negotiate for parts from just about anywhere to complete this vehicle into running condition again.

User avatar
dp320
Posts: 41
Joined: Sun Feb 27, 2011 9:08 pm
Car: 1965 520

Post

Not sure which the side trim piece you need is. Is it the metal interior piece just below the window this is about 2" wide and 24" long? I have several of those (2nd photo frmo top).

Or is it part of the window assembly? If so, I have the two complete window frames in the photo (4th from top).

marblemania
Posts: 6
Joined: Mon May 02, 2011 7:11 am
Car: 1965 L 320

Post

dp320 wrote:Not sure which the side trim piece you need is. Is it the metal interior piece just below the window this is about 2" wide and 24" long? I have several of those (2nd photo frmo top).

Or is it part of the window assembly? If so, I have the two complete window frames in the photo (4th from top).
If your reply was to my post, I repaired the door but still need the stainless trim piece that runs down the outside mid way of the passenger door.
If you would part with just that one piece, I can finish prepping the door and not weld up the mount holes deleting the side trim.
I'm in Oregon state, USA, Zip 97333. How much for the part with shipping?

User avatar
dp320
Posts: 41
Joined: Sun Feb 27, 2011 9:08 pm
Car: 1965 520

Post

marblemania wrote: If your reply was to my post, I repaired the door but still need the stainless trim piece that runs down the outside mid way of the passenger door.
If you would part with just that one piece, I can finish prepping the door and not weld up the mount holes deleting the side trim.
I'm in Oregon state, USA, Zip 97333. How much for the part with shipping?
Ok, this isn't a piece of the window frame then. I do have some other parts that may be what you describe. I'll need to match the spare ones against what's on my door. I'm not sure.

lester
Posts: 58
Joined: Thu Apr 30, 2009 5:04 pm
Car: 1964 datsun pickup
1998 ford ranger

Post

let me know if you dont need one and who about the radiator

tonalteco
Posts: 6
Joined: Wed Sep 22, 2010 11:38 am
Car: 320 pick up
Contact:

Post

Do you still have the control panel?
How much for it?
please let me know if you also have the windshield
thanks

chzcake
Posts: 3
Joined: Sun Sep 25, 2011 6:24 pm
Car: 63 L320

Post

Hey dp320, I would be interested in buying a set of sun visors if you still have any. Also possibly a few other parts as well. Please email me at [email protected], Thanks.

User avatar
rkldesign
Posts: 4
Joined: Thu Mar 15, 2012 10:25 pm

Post

Do you still have any 320 parts available? You can email me at [email protected]
Thanks, Richard

User avatar
dp320
Posts: 41
Joined: Sun Feb 27, 2011 9:08 pm
Car: 1965 520

Post

lester wrote:let me know if you dont need one and who about the radiator
I have a 2nd radiator. I'm presuming it's a replacement of course, and not original. PM if interested still, sorry for the delayed reply.

User avatar
dp320
Posts: 41
Joined: Sun Feb 27, 2011 9:08 pm
Car: 1965 520

Post

chzcake wrote:Hey dp320, I would be interested in buying a set of sun visors if you still have any. Also possibly a few other parts as well. Please email me at [email protected], Thanks.
I have three pairs of visors. Two pair are identical to what I have in my 320--with three screws. The third pair has two screws, not sure what model they are for.

Chrome not perfect. $10 plus shipping?

User avatar
dp320
Posts: 41
Joined: Sun Feb 27, 2011 9:08 pm
Car: 1965 520

Post

tonalteco wrote:Do you still have the control panel?
How much for it?
please let me know if you also have the windshield
thanks

I have one complete control panel, one control panel broken in half and one set of gauges not set into the panel piece. No idea if the gauges work, they don't seem to maltreated or anything, normal for their age. Chrome with some blemishes. Between them all I think there are 4 of the green signal plastic triangle pieces.

I'd like to be fair but firm since my risk in selling them is not having some to canabalize. I'm thinking $75 plus shipping for the complete one, then $20 per gauge for the others. I'm keeping one set of the green triangles for now.

User avatar
AZhitman
Administrator
Posts: 71061
Joined: Mon Apr 29, 2002 2:04 am
Car: 58 L210, 63 Bluebird RHD, 64 NL320, 65 SPL310, 66 411 RHD, 67 WRL411, 68 510 SR20, 75 280Z RB25, 77 620 SR20, 79 B310, 90 S13, 92 SE-R, 92 Silvia Qs, 98 S14.
Location: Surprise, Arizona
Contact:

Post

Wondering if you ran across any other front fender trim pieces (wider than the ones you pictured on page 1).

Thanks much!

User avatar
dp320
Posts: 41
Joined: Sun Feb 27, 2011 9:08 pm
Car: 1965 520

Post

AZhitman wrote:Wondering if you ran across any other front fender trim pieces (wider than the ones you pictured on page 1).

Thanks much!
No more of the SS trim. I have 3 pairs of 1200 side logos, several 60 hp badges and front emblems but I haven't really sorted them out yet.

Here's some more photos of stuff I'm thinking of selling.

A carburetor that is missing a few pieces. I have a complete one and don't think I'll need to canabalize again.
Image
Image
Image

Some instrument panels. I'm keeping the one at the right and one more set to canabalize just in case. And a set of the turn signal indicator lenses.
Image

Can part with at least one "bucket" and bezel.
Image

Extra J13
Image

mgpbowties
Posts: 2
Joined: Sat Jul 28, 2012 9:07 am
Car: 1965 320 factory stakebed unrestored 46.000 mile

Post

Hi,
Do you still have the original radio and face plate,also i need a tail light lens.
Thanks Mike

Djditty
Posts: 3
Joined: Sun Oct 07, 2012 8:23 pm

Post

Any parts left? Looking for a tranny.

bpaul
Posts: 5
Joined: Wed Oct 09, 2013 8:33 pm
Car: 1965 Datsun Pickup 320
1969 Datsun Roadster 2000

Post

Hello - new to this forum - I have a 65 320 with 64 features - need brake master cylinder and other brake parts. Any help is greatly appreciated.

Regards,

Brian

User avatar
AZhitman
Administrator
Posts: 71061
Joined: Mon Apr 29, 2002 2:04 am
Car: 58 L210, 63 Bluebird RHD, 64 NL320, 65 SPL310, 66 411 RHD, 67 WRL411, 68 510 SR20, 75 280Z RB25, 77 620 SR20, 79 B310, 90 S13, 92 SE-R, 92 Silvia Qs, 98 S14.
Location: Surprise, Arizona
Contact:

Post

Welcome aboard, Brian. Might be worth starting a new thread for your parts request as well.

Brake stuff for the 320 sometimes comes up on ebay. There's a few offshore sellers who have stuff from time to time.

I have access to wheel cylinders and shoes... the M/C should be rebuilt to retain originality. If you don't care about that, a 520/521 M/C can be used with adapters (easily sourced at NAPA).

jester4always
Posts: 2
Joined: Sat Oct 26, 2013 1:11 pm
Car: l320 1965

Post

I am hoping you may have a few parts left.
64 grill ( I have a grill with the round lights, need triangular )
Link (rod) between Drivers side a arm and front frame ( no idea what its called, maybe torsion control?)
steering wheel and turn signal switch
Bill R
[email protected]

Hooverd770
Posts: 1
Joined: Tue Oct 29, 2013 4:38 pm
Car: 63-64 SPL320

Post

I am parting out a wrecked 320 PU. If anyone needs parts ie engine transmission misc please email me. The truck is on the Northern Oregon Coast. Can take pics if desired.

Thanks

[email protected]

User avatar
dp320
Posts: 41
Joined: Sun Feb 27, 2011 9:08 pm
Car: 1965 520

Post

Bump for update in original post.

Jefe De Jefes
Posts: 31
Joined: Wed Dec 31, 1969 5:00 pm
Location: Fresno County, California

Post

dp320 wrote:Bump for update in original post.
You wouldn't happen to have an engine hand crank would you?

User avatar
AZhitman
Administrator
Posts: 71061
Joined: Mon Apr 29, 2002 2:04 am
Car: 58 L210, 63 Bluebird RHD, 64 NL320, 65 SPL310, 66 411 RHD, 67 WRL411, 68 510 SR20, 75 280Z RB25, 77 620 SR20, 79 B310, 90 S13, 92 SE-R, 92 Silvia Qs, 98 S14.
Location: Surprise, Arizona
Contact:

Post

dp320 wrote:Bump for update in original post.
What would you sell me the radio for?

User avatar
dp320
Posts: 41
Joined: Sun Feb 27, 2011 9:08 pm
Car: 1965 520

Post

AZhitman wrote:
dp320 wrote:Bump for update in original post.
What would you sell me the radio for?
It seems to be a pretty unusual radio that says "Datsun" on it. I can't say if it's year correct but whatever it is it's pretty rare. Have had several inquiries. I'm leaving it in the truck unless some new information radically changes my mind, which I doubt.

I have, however, found a direction for my next project to the point I may sell the entire truck and remaining spare parts. I'm in no particular hurry.


Return to “Datsun 320”