Auto-Up Window Switch not working

A forum for the Nissan Quest... minivan lovers unite!
RonBranam12
Posts: 63
Joined: Fri Aug 20, 2021 6:48 am
Car: 2016 Nissan Quest SV

Auto-Up Window Switch not working

Postby RonBranam12 » Sun Jun 12, 2022 10:12 am

Hi,

After I got my 2016 with SV trim out of the dealership for a new tranny install (See other thread) the Auto-Up for the front windows does not function. They will go up if I hold the switch. Auto-Down works just fine. Any suggestions?


User avatar
VStar650CL
Posts: 5633
Joined: Thu Nov 12, 2020 1:25 pm
Car: 2013 Nissan Altima 2.5 SL
2004 Nissan Altima 2.5 S

Re: Auto-Up Window Switch not working

Postby VStar650CL » Sun Jun 12, 2022 11:50 am

You just need to reset it, the Master lost its position memory when they disconnected the battery. Run the window to the bottom, then raise it to the top and keep holding the button for about 5 seconds after it gets there. That makes the Master reinitialize the encoder and Auto should start working again.

RonBranam12
Posts: 63
Joined: Fri Aug 20, 2021 6:48 am
Car: 2016 Nissan Quest SV

Re: Auto-Up Window Switch not working

Postby RonBranam12 » Sun Jun 12, 2022 8:40 pm

Done. Did. Thanks. I knew it was something simple related to the battery disconnect but didn't know how/what.

User avatar
VStar650CL
Posts: 5633
Joined: Thu Nov 12, 2020 1:25 pm
Car: 2013 Nissan Altima 2.5 SL
2004 Nissan Altima 2.5 S

Re: Auto-Up Window Switch not working

Postby VStar650CL » Mon Jun 13, 2022 5:34 am

You're most welcome as always. Happy motoring!


Return to “Quest Forum”