Anyone near Las Vegas? If so, step inside! (Aluminum Engine Under Tray)

Forum for Infiniti M37, M56 M35h Hybrid and Q70 owners.
User avatar
biggie
Moderator
Posts: 10330
Joined: Wed Jul 24, 2002 2:31 am
Car: '16 Q70L/'14 Q60S Vert/'19 Armada/'09 FX35
Location: Clemmons, NC

Post

Been away for a bit due to a death, I'll have to get this ordered soon. Thanks.


User avatar
Ilya
Moderator
Posts: 9800
Joined: Fri Apr 23, 2010 11:20 pm
Car: 2011 M56x but I spend a lot of time on my 2015 Kawasaki Vulcan S. Former owner of a 2007 M35x. Also take care of my wife's 2016 QX60.
Location: Charlotte, NC
Contact:

Post

TBW, any word on the AWD? We have a few guys who have those and haven't gotten an answer in quite a while...

tollboothwilley
Posts: 3759
Joined: Sun Aug 26, 2007 7:45 pm
Car: 2003 G35 Sedan w/ NAV
Location: LAS VEGAS!!!
Contact:

Post

AWD should be available - i have a couple made. Only have one for the M37X - in raw aluminum

Link to site
http://www.tollboothwilley.com/m37-m56/

DoN_BLaZe34
Posts: 1723
Joined: Fri Jul 23, 2010 4:40 pm
Car: 2007 M45 Sport - Sold
2006 FX45 - Traded
2014 Q70S 5.6 - Sold
2017 Q70L 5.6 - Current
Location: Jersey

Post

Ordered mine

User avatar
Ilya
Moderator
Posts: 9800
Joined: Fri Apr 23, 2010 11:20 pm
Car: 2011 M56x but I spend a lot of time on my 2015 Kawasaki Vulcan S. Former owner of a 2007 M35x. Also take care of my wife's 2016 QX60.
Location: Charlotte, NC
Contact:

Post

tollboothwilley wrote:AWD should be available - i have a couple made. Only have one for the M37X - in raw aluminum

Link to site
http://www.tollboothwilley.com/m37-m56/
:bigthumb: :dblthumb:

User avatar
adeedpb
Posts: 187
Joined: Tue Jul 28, 2015 8:02 pm
Car: 2012 M56
2005 BMW X5 4.4i
2005 G35 Sedan - SOLD
1995 Ford Taurus SHO (Supercharged) - SOLD
Location: Sacramento

Post

Thanks TBW! Got my under tray today!

Superb Build Quality and Craftsmanship!

tollboothwilley
Posts: 3759
Joined: Sun Aug 26, 2007 7:45 pm
Car: 2003 G35 Sedan w/ NAV
Location: LAS VEGAS!!!
Contact:

Post

Those CA guys are the first ones - normally only 1 day to Cali. The rest should be getting them very soon as well.

Biggie - I did make a couple of the M56 bell house piece. Before you order, send me an email

User avatar
biggie
Moderator
Posts: 10330
Joined: Wed Jul 24, 2002 2:31 am
Car: '16 Q70L/'14 Q60S Vert/'19 Armada/'09 FX35
Location: Clemmons, NC

Post

Ok, will have to wait until after holidays now, so early Jan for me.

tollboothwilley
Posts: 3759
Joined: Sun Aug 26, 2007 7:45 pm
Car: 2003 G35 Sedan w/ NAV
Location: LAS VEGAS!!!
Contact:

Post

no prob

DoN_BLaZe34
Posts: 1723
Joined: Fri Jul 23, 2010 4:40 pm
Car: 2007 M45 Sport - Sold
2006 FX45 - Traded
2014 Q70S 5.6 - Sold
2017 Q70L 5.6 - Current
Location: Jersey

Post

Of course my tray arrives today on the day I'm off and it's pouring outside.

Frog
Posts: 200
Joined: Fri Feb 21, 2014 11:59 pm
Car: 2011 M56s

Post

Better than me. My wife said wait tell Christmas let me know how it looks and works

User avatar
Mjkkb2
Posts: 693
Joined: Mon Oct 21, 2013 11:37 am
Car: 2018 QX60 AWD, 2011 M37S, 2011 Quest, 2001 I30t(sold)
Location: Richmond VA

Post

so I walked in to the office this morning after being off for a few days and saw a big TBW box on my desk. I opened the bad boy up and found out that the large piece has a bent corner. I wish the tray would have been better protected with some foam around corners. Not sure what to do, as I really wanted to get it on asap....

DoN_BLaZe34
Posts: 1723
Joined: Fri Jul 23, 2010 4:40 pm
Car: 2007 M45 Sport - Sold
2006 FX45 - Traded
2014 Q70S 5.6 - Sold
2017 Q70L 5.6 - Current
Location: Jersey

Post

That royally sucks man, sorry to hear that...

TBW, is it possible to order additional bolts? My OCD is kicking in and I'd prefer to have all of them match.

User avatar
Ilya
Moderator
Posts: 9800
Joined: Fri Apr 23, 2010 11:20 pm
Car: 2011 M56x but I spend a lot of time on my 2015 Kawasaki Vulcan S. Former owner of a 2007 M35x. Also take care of my wife's 2016 QX60.
Location: Charlotte, NC
Contact:

Post

Mjkkb2 wrote:so I walked in to the office this morning after being off for a few days and saw a big TBW box on my desk. I opened the bad boy up and found out that the large piece has a bent corner. I wish the tray would have been better protected with some foam around corners. Not sure what to do, as I really wanted to get it on asap....
For what it's worth, I've gotten like 5-6 shields from TBW (since I was his primary M tester for both the Y50 and Y51) and all came in flawlessly and were packaged pretty well.
DoN_BLaZe34 wrote:That royally sucks man, sorry to hear that...

TBW, is it possible to order additional bolts? My OCD is kicking in and I'd prefer to have all of them match.
It should have came with a full-set of bolts. Might be in the box? Mine fell to the bottom on one shipment and I had to dump the whole box to get em out.

User avatar
Mjkkb2
Posts: 693
Joined: Mon Oct 21, 2013 11:37 am
Car: 2018 QX60 AWD, 2011 M37S, 2011 Quest, 2001 I30t(sold)
Location: Richmond VA

Post

TBW is working it out with me. I think I will keep it and try to flatten it out. I'd like to commend him for fast communication and attention to my problem. Very good customer service!

DoN_BLaZe34
Posts: 1723
Joined: Fri Jul 23, 2010 4:40 pm
Car: 2007 M45 Sport - Sold
2006 FX45 - Traded
2014 Q70S 5.6 - Sold
2017 Q70L 5.6 - Current
Location: Jersey

Post

@Mjkkb2 I'm glad to hear that.

@Ilya they did come with bolts but I'm looking to change all of the bolts underneath so I need more than what was provided.

User avatar
Ilya
Moderator
Posts: 9800
Joined: Fri Apr 23, 2010 11:20 pm
Car: 2011 M56x but I spend a lot of time on my 2015 Kawasaki Vulcan S. Former owner of a 2007 M35x. Also take care of my wife's 2016 QX60.
Location: Charlotte, NC
Contact:

Post

Ahh, understood.

He has this listed on the site, however the M isn't listed. But I'm guessing it's the same: http://www.tollboothwilley.com/under-tr ... ssan-350z/

DoN_BLaZe34
Posts: 1723
Joined: Fri Jul 23, 2010 4:40 pm
Car: 2007 M45 Sport - Sold
2006 FX45 - Traded
2014 Q70S 5.6 - Sold
2017 Q70L 5.6 - Current
Location: Jersey

Post

Nice find thanks!

They do appear to be the same ones. I'm hoping to be able to buy just the body bolts...I wait to hear back, if not then I'll have to buy that entire kit.

1GR8M56S
Posts: 99
Joined: Sun Jul 05, 2015 1:53 pm
Car: 2013 M56S

Post

Mjkkb2 wrote:TBW is working it out with me. I think I will keep it and try to flatten it out. I'd like to commend him for fast communication and attention to my problem. Very good customer service!
Yea mine came with a corner bent but its not a big deal, looks good though.

User avatar
Mjkkb2
Posts: 693
Joined: Mon Oct 21, 2013 11:37 am
Car: 2018 QX60 AWD, 2011 M37S, 2011 Quest, 2001 I30t(sold)
Location: Richmond VA

Post

How Did you get it flat?

1GR8M56S
Posts: 99
Joined: Sun Jul 05, 2015 1:53 pm
Car: 2013 M56S

Post

I haven't dealth with it yet, but it should be easy

User avatar
Ilya
Moderator
Posts: 9800
Joined: Fri Apr 23, 2010 11:20 pm
Car: 2011 M56x but I spend a lot of time on my 2015 Kawasaki Vulcan S. Former owner of a 2007 M35x. Also take care of my wife's 2016 QX60.
Location: Charlotte, NC
Contact:

Post

Probably just heat it up good with a heat gun and use something to bent the warm aluminum?

tollboothwilley
Posts: 3759
Joined: Sun Aug 26, 2007 7:45 pm
Car: 2003 G35 Sedan w/ NAV
Location: LAS VEGAS!!!
Contact:

Post

Sorry Guys - been out of town for the holidays, and my grandma just passed away as well. In any case - haven't been into the thread for a minute.
1GR8M56S wrote:
Mjkkb2 wrote:TBW is working it out with me. I think I will keep it and try to flatten it out. I'd like to commend him for fast communication and attention to my problem. Very good customer service!
Yea mine came with a corner bent but its not a big deal, looks good though.
UPS left a message - I'll call them and figure out whats going on in the morning and get back to you. You are only the 3rd person who has ever had an issue with a bend - In 5 years and many many shipped out. Its not something we deal with very often, you just happen to be very lucky i guess!

Any questions or anything at all just hit me up. I believe I sent a biz card with each tray as well.

tollboothwilley
Posts: 3759
Joined: Sun Aug 26, 2007 7:45 pm
Car: 2003 G35 Sedan w/ NAV
Location: LAS VEGAS!!!
Contact:

Post

DoN_BLaZe34 wrote:Nice find thanks!

They do appear to be the same ones. I'm hoping to be able to buy just the body bolts...I wait to hear back, if not then I'll have to buy that entire kit.

Hey Don
Yeah, I can do just bolts. How many do you want/need?

1GR8M56S
Posts: 99
Joined: Sun Jul 05, 2015 1:53 pm
Car: 2013 M56S

Post

tollboothwilley wrote:Sorry Guys - been out of town for the holidays, and my grandma just passed away as well. In any case - haven't been into the thread for a minute.
tollboothwilley wrote:
1GR8M56S wrote:Yea mine came with a corner bent but its not a big deal, looks good though.
UPS left a message - I'll call them and figure out whats going on in the morning and get back to you. You are only the 3rd person who has ever had an issue with a bend - In 5 years and many many shipped out. Its not something we deal with very often, you just happen to be very lucky i guess!

Any questions or anything at all just hit me up. I believe I sent a biz card with each tray as well.
Im good with mine im gonna tap it with a rubber hammer it should be good, just wainting for some free time to put it on and my condolences to you and your family.

DoN_BLaZe34
Posts: 1723
Joined: Fri Jul 23, 2010 4:40 pm
Car: 2007 M45 Sport - Sold
2006 FX45 - Traded
2014 Q70S 5.6 - Sold
2017 Q70L 5.6 - Current
Location: Jersey

Post

tollboothwilley wrote:
DoN_BLaZe34 wrote:Nice find thanks!

They do appear to be the same ones. I'm hoping to be able to buy just the body bolts...I wait to hear back, if not then I'll have to buy that entire kit.

Hey Don
Yeah, I can do just bolts. How many do you want/need?
I think 10 should be enough.

Also, sorry for your loss. I recently lost my grandmother as well..

tollboothwilley
Posts: 3759
Joined: Sun Aug 26, 2007 7:45 pm
Car: 2003 G35 Sedan w/ NAV
Location: LAS VEGAS!!!
Contact:

Post

DoN_BLaZe34 wrote: I think 10 should be enough.

Also, sorry for your loss. I recently lost my grandmother as well..
Yeah, never fun losing loved ones. As for the bolts, I can check/list it on the site. Or just do it via paypal. $5 shipped for ya.

DoN_BLaZe34
Posts: 1723
Joined: Fri Jul 23, 2010 4:40 pm
Car: 2007 M45 Sport - Sold
2006 FX45 - Traded
2014 Q70S 5.6 - Sold
2017 Q70L 5.6 - Current
Location: Jersey

Post

Couldn't agree more. I PMed you my paypal info

User avatar
Mjkkb2
Posts: 693
Joined: Mon Oct 21, 2013 11:37 am
Car: 2018 QX60 AWD, 2011 M37S, 2011 Quest, 2001 I30t(sold)
Location: Richmond VA

Post

tollboothwilley wrote:Sorry Guys - been out of town for the holidays, and my grandma just passed away as well. In any case - haven't been into the thread for a minute.


UPS left a message - I'll call them and figure out whats going on in the morning and get back to you. You are only the 3rd person who has ever had an issue with a bend - In 5 years and many many shipped out. Its not something we deal with very often, you just happen to be very lucky i guess!

Any questions or anything at all just hit me up. I believe I sent a biz card with each tray as well.
No worries man, and sorry about the news.

User avatar
biggie
Moderator
Posts: 10330
Joined: Wed Jul 24, 2002 2:31 am
Car: '16 Q70L/'14 Q60S Vert/'19 Armada/'09 FX35
Location: Clemmons, NC

Post

See that mine is shipping today. I will try to be patient waiting on UPS. Have 1k til next oil change.

As a side note, everyone talk to loved ones more than you do now, they are gone sooner than you think. Just lost my dad in the beginning of Dec, that completes both parents and all grandparents.


Return to “Infiniti M37, M56, M35h Hybrid and Q70 Forum”