I don't need it and I could use a lil coin for the machine work on the block and space on the shelf. These are Greddy sub bosses TIG welded into the runners and the throttlebody hole is ground oversize for an SR20DE throttle. I think the KA24 is the same size. I have over a hundred and a half in the bosses and about that in the welding. If you want the 370cc CA18DET injectors in there now I will leave them in no extra charge. The throttle and the back plate for the plenum IS NOT included.
$360.00 shipped stateside only.
anybody looking for a crazy manifold, 4 subinjectors
-
themadscientist
- Posts: 26254
- Joined: Tue Nov 12, 2002 3:30 pm
- Car: R32 GTR, DR30 RS Turbo, BRZ, Lunchbox, NSR50 Sportster 883 Iron
- Location: Staring down at you with disdain from the spooky mountaintop castle.
-
ca18detgabby
- Posts: 3329
- Joined: Sat Feb 10, 2007 5:31 pm
- Car: 92 Nissan S13 ca18det SOLD
03 Infiniti G35 - Location: lake Mary FL
- Contact:
Re: anybody looking for a crazy manifold, 4 subinjectors (themadscientist)
that is very neat. did you modify it to run a larger TB?
do you have them fire when the stock injectors fire or is this going to require a standalone....
the clearance issues should be even less for state side people as their break booster wont get in the way.
I like, but idk what kind of crazy tune would be required. theoreticly you could tune it for 740s and run 2 sets of 370s correct?
do you have them fire when the stock injectors fire or is this going to require a standalone....
the clearance issues should be even less for state side people as their break booster wont get in the way.
I like, but idk what kind of crazy tune would be required. theoreticly you could tune it for 740s and run 2 sets of 370s correct?
-
themadscientist
- Posts: 26254
- Joined: Tue Nov 12, 2002 3:30 pm
- Car: R32 GTR, DR30 RS Turbo, BRZ, Lunchbox, NSR50 Sportster 883 Iron
- Location: Staring down at you with disdain from the spooky mountaintop castle.
Re: anybody looking for a crazy manifold, 4 subinjectors (ca18detgabby)
you would use a subinjector controller like an HKS AIC or Trust Rebic III to run the subs but many standalones can run staged injection. My intension was to retain the stock mains and add the second set of 370s to kick in as boost rose. I have the Haltech now though and will be running hugemongous mains.