Post by
wirelessalpha »
https://forums.nicoclub.com/wirelessalpha-u33700.html
Sun May 27, 2007 8:13 pm
Quick update: So I get the balls to put one seat in already. It's a sparco evo 2, made for fatties like me. My equipment list:
1. Megan Racing brackets - like 99 bucks or something on ebay2. 2 sets of sparco side mounts - paid about 50-60 a set, shipped. Again, ebay...and I had to wait for these prices.3.Sparco Evo 2 seats - they come in evo size, evo 2, and evo xl for you real large fatties. This set I copped for $450! Practically new, no rips or tears. Only thing I hate is the color.
1. So, the side mounts suprising fit on the megan brackets, only problem is: The seat is not normal size (at least the base), so I had to slot out the openings on the side mounts and the bracket. I kept doing this trial and error, little at a time...since the less I need to slot out...the stronger the bracket should be. Also to gauge how much I would need to do this before I butcher the passenger set. Here are some pics:
Finished set
Afterthoughts: Maybe it's my car...or just the pair of brackets I had...but just FYI: I had the hardest f'ing time mounting the entire assembly back into the car after I was done. The "240sx megan bracket" didn't seem to line up anywhere with the bolt holes on the floorpan. So, I had to mallet here and there...and even use an impact wrench at one point. the result: A slightly tilted seat. Anyways...after this wednesday I'll come back to look at it. Besides, tilted right is not so bad anyway...since I'm always leaning my elbow on the center console. It just looks madddd gay from the back though - you can tell the seat is tilted.
also fyi: Even on the lowest setting, I still feel the seat is a bit higher than stock...even with the cushions out. For those of you who don't know...I tried using a set of nagisa rails before which was impossible with a wide seat like this. Again, I'll come back to this height problem later.