93 Q45 need help

[enrike]

I tried the search tool but nothing came up. Anyhow, I am going to replace two studs on the front wheel and while I have never worked on an Infinity and it looks straight forward, well do you guys have any tips for doing this.

I also tried downloading the FSM from Phat20 but my computer will not open it, any tips there are also appreciated.

Thanks

[maxnix]

The downloaded file is compressed with Winrar.

There are a couple of posts (search in post bodies), but it is pretty straight forward with the FSM.

Check the back of your car. Bet there is no letter y there.
Modified by maxnix at 1:51 PM 5/18/2007

[Q451990]

I would make sure you have a wheel stud remover. I suspect the parts stores would have these in their loan-a-tool inventory. You absolutely don't want to try hammering it out... the hubs are already prone to warping enough (causing brake rotor warping) without that stress!



Heath

[elwesso]

I banged mine out with a large hammer and they come out pretty easy.... I capitalize on any excuse to use a large hammer in a constructive manner on my Q.

[enrike]

Thanks guys.