240se Rims...Fit on Versa?

[vincent_18]

Will the 240se rims fit on the versa...is it the same lug pattern?? Trying to figure this one out...help me out guys.

Thanks, Pat D>

[CodeRed]

I think the 240 rims are 4x100, Versa's bolt pattern is 4x114.3

[blindsnyper]

i think thers a big difference in the offset also...

this is from a past thread, i think there off of his 240...

I was toying with the idea of trying my 17x9+20's on the wife's car. Here's a few pics.



We're still thinking about using them, but will need coilovers and flares.

[jspec603]

I think the 240 rims are 4x100, Versa's bolt pattern is 4x114.3

LOL and your a Mod? 240's have the same bolt pattern, 4x114. Offset is a different question all together. The factory SE wheels 'should' fit being that they are of a higher offset. And those wheels pictured in the about post are mine. They are Falken Hanabi's 17x9 +20. My girl and I are still thinking about using those on her Versa with some carbon fiber fender flares. First things first are springs/coilovers. Anyways, ya the 240 factory wheels should fit, along with Sentra SE-R wheels too.

[vincent_18]

thanks for the help guys. appreciate it! Do I also need to get an alignment with it??

[jspec603]

If your only removing one set of wheels and replacing them with another of similar size then don't bother. If your planning on disassembling your suspension and installing new springs and or coil overs then yes, you should definitely get an alignment.

[biggie]

Yes, both are 4x114.3 and both have about the same offset (+35 to +40). The 240 se wheel is a 6 inch wide wheel though, so slight width improvement.

As said though the B15 Spec-V wheel will fit and probably look a little better.