200sx seats into a hardbody

[xxskouxx]

does anyone know if a 200sx bucket seats fit into my hardybody?

[Rev_D21]

Anything will fit if you use the brackets from the original seats.

[xxskouxx]

well i have a bench seat so i only have two brackets. and how did you get that avatar?

[RT]

Or modify brackets to fit hardbody mounting points

[xxskouxx]

yeah im going to take a look at them monday and see how much of a differance it is because there a steal at $75 i thnik for good of condition there in. thanks again for your help

[Rev_D21]

Sorry I saw 86 HB w/ 3.0L and just assumed King Cab. My bad. Cut the brackets off of a Pathfinder seat set. Then weld the 200sx seats to those brackets.

[xxskouxx]

yeah that work. no its a long bed heavy duty reg cab

[Tosh Cari]

s13 240sx seats fit just fine so I'm guessing 200sx's would work just fine.

[xxskouxx]

yeah im going to try

[Tosh Cari]

its super easy if you didn't have a bench seat. I would suggest just going to your local junk yard/pick a part and getting the seat rails from a hardbody without a bench. then just get a stick of angle iron drill holes for the bottom D21 rail and then drill holes in the side for the newer seats. I can get more pics of the install if you want.

[xxskouxx]

yeah know i found a pair of perfect pathy seats for a $100 that im going to get. it should be easy

[RT]

Junkyard pathfinder and trucks with buckets just steal the brackets even if the seats are trash. Just remove the brackets and you are set.