1997 maxima starting/timing problem

[Duke1966]

When starting my Maxima it turns over unevenly as if the timing is off.When it starts,it runs fine.I had it scanned and it showed a knock sensor problem,a crank position sensor fault,EGR control solenoid problem,cam position sensor fault,EVAP small bank,and O2 sensor.Can you suggest which problem would cause this?

[MaximA32]

A cam position sensor fault would most definitely cause the problem you described.

[coppolac]

Hi! Been searching for same problem... was it the cam position sensor? Or something else?Replaced starter, thought it was bad, 2nd one same problem.Thanks!

[574-240sx]

When I had a cam position sensor go bad in my maxima it would randomly shut off and not start for awhile. I would pull codes and it would come up knock sensor, crank position sensor, rear 02 sensor. I replaced the crank sensor, problem still happened then I finally pulled a cam position sensor code and that was it.