180sx tail lights

Post by **Fitz_240** » Sun Jun 19, 2005 11:38 am

Awesome! Just placed the order.

Question: Last month you quoted me $25 for shipping and the site calculated $40 for ground, is that right?

Post by **Fitz_240** » Mon Jun 20, 2005 9:05 am

Florida240sx wrote:What lamp kits?I'm in the dark what are these?I probably refer to it as something else....

The 180sx Kouki tails

Post by **Rosco** » Tue Jun 21, 2005 1:29 pm

Just got mine yesterday and I installed last night as well....All I can say is Bad freakin arse man!!!! I will postsome pics this weekend...Thanks Dantech..

Post by **MidwayParts** » Wed Jun 22, 2005 6:04 am

Rosco wrote:Just got mine yesterday and I installed last night as well....All I can say is Bad freakin arse man!!!! I will postsome pics this weekend...Thanks Dantech..

Post by **chaddicus** » Thu Jun 23, 2005 12:29 pm

Yeah got mine on friday last week, installed them last night. shame I didn't have the heads up on having to switch out the plugs but a buddy of mine told me how to do it and it was done with. Look great, I'll try and post a pic sometime. thanks again, they were worth the wait.

Post by **superDorifto** » Thu Jun 23, 2005 3:41 pm

dantech wrote:Hey guys, Im checking into it. Its kinda difficult to get factory stuff shipped over from Japan.

Give me a little time and hopefully I can get a great price for you guys.

(oh, and I hate the dutch)

word, you cant trust those sneaky bastards....im one of them.

Post by **pfm101_com** » Thu Jun 23, 2005 6:26 pm

Sorry it took so long to get pics, but after my car was stolen my whole project timeline was thrown off and I wasn't up for running around with the unpainted lights as they would have only made my car even more borostyle. So without further ado here's a few snaps of the lights:

Thank you very much for a fantastic deal on such an awesome set of lights

Post by **MidwayParts** » Fri Jun 24, 2005 5:40 am

superDorifto wrote:word, you cant trust those sneaky bastards....im one of them.

Ishint zhat vierd?

Post by **MidwayParts** » Fri Jun 24, 2005 5:40 am

pfm101_com wrote:Sorry it took so long to get pics, but after my car was stolen my whole project timeline was thrown off and I wasn't up for running around with the unpainted lights as they would have only made my car even more borostyle.

Thank you very much for a fantastic deal on such an awesome set of lights

Car looks awesome. Thanks for the pics.

Post by **BB Turbo** » Fri Jun 24, 2005 3:59 pm

Fitz_240 wrote:The 180sx Kouki tails

Looks nice Tom!

Post by **Fitz_240** » Sat Jun 25, 2005 3:35 am

Yeah...you should get a hatch

Thanks to Dantech for an awesome deal. They arrived yesterday...left work early to get them (UPS left them on my porch), and installed them...w00t...now I need paint!!!!

Modified by Fitz_240 at 8:50 AM 6/25/2005

Post by **MidwayParts** » Sun Jun 26, 2005 8:32 am

I like the pics with them all lit up. SWeeeett.

Post by **Fitz_240** » Mon Jun 27, 2005 4:36 am

dantech wrote:I like the pics with them all lit up. SWeeeett.

Yeah, took me a few tries to catch the hazards when they were lit

Post by **pfm101_com** » Wed Jun 29, 2005 9:20 am

ButtaSc0ttch wrote:How much was that paint job PFM101.com? BTW does anyone know where I can get more silcone seal for these 180sx tail lights?

The paintjob with a few spots of bodywork was $600, here is a before and after image for comparison.

The sealant you are looking for is butyl based I believe (not silicone) and you can source it at many automotive paint suppliers and save a few bucks.

Some people have had luck using "3M Windo-Weld Ribbon Sealer" part # 051135 08612

Of course you can also get it through the dealer by the small roll part # B6553-89915

Best of luck & thanks for the compliments

Post by **krimsonviper** » Fri Jul 08, 2005 8:06 pm

Am i too late for tha deal?!? please say no imma have a heart attack! how much to 94585?

Post by **MidwayParts** » Mon Jul 11, 2005 5:42 am

Absolushun wrote:Am i too late for tha deal?!? please say no imma have a heart attack! how much to 94585?

You can find those here: http://www.trademotion.com/par...=3638

Its about $25 to ship.

Post by **SlideAddictionRPS13** » Mon Jul 11, 2005 8:15 am

hey dantech u think u can get me the ones with the center piece that says" rps13" with the tail lights...and how much shipped to 91766 California

Post by **trublshootr** » Mon Jul 11, 2005 5:06 pm

Are these 180sx kouki tail lights still in stock?...how much is shipping to san diego, CA 92139?

thanks!

Post by **MidwayParts** » Tue Jul 12, 2005 5:27 am

SlideAddictionRPS13 wrote:hey dantech u think u can get me the ones with the center piece that says" rps13" with the tail lights...and how much shipped to 91766 California

Is that part of the lamp kit? I cant get peices seperate from the kit.

Post by **MidwayParts** » Tue Jul 12, 2005 5:28 am

trublshootr wrote:Are these 180sx kouki tail lights still in stock?...how much is shipping to san diego, CA 92139?

thanks!

Yes I have it in stock and shipping is about $25

Post by **s13det** » Thu Jul 14, 2005 7:26 am

I'd like to know what you doing with customs for canadian customer? I'd like to save on those

I'm interested in buying the lamp kit from you since you're the cheaper.

Here's my postal code: G2E 4L2

If you can give me a total price with shipping, would be very appreciated !

Post by **SlideAddictionRPS13** » Thu Jul 14, 2005 6:48 pm

yea u no the centerpiece ...ive seen a carbor fiber one where its say" rps13" if u want i can send u a picture but i was wonderin if u could get me the whole tail lights but i want the centerpiece to say " rps13" how much shipped to Pomona CA 91766

Post by **MidwayParts** » Fri Jul 15, 2005 5:10 am

s13det wrote:I'd like to know what you doing with customs for canadian customer? I'd like to save on those

I'm interested in buying the lamp kit from you since you're the cheaper.

Here's my postal code: G2E 4L2

If you can give me a total price with shipping, would be very appreciated !

The price is $435 plus $40 in shipping. I cant really help out with the customs thing. I have shipped them to Canada before. He just paid the customs when it got there. Sorry bout not bein able to help but its still a pretty good deal.

Post by **MidwayParts** » Fri Jul 15, 2005 5:15 am

SlideAddictionRPS13 wrote:yea u no the centerpiece ...ive seen a carbor fiber one where its say" rps13" if u want i can send u a picture but i was wonderin if u could get me the whole tail lights but i want the centerpiece to say " rps13" how much shipped to Pomona CA 91766

I dont have a listing for that centerpeice. I'll take a look a the picture if you like and see if I can come up with something.

Post by **SlideAddictionRPS13** » Fri Jul 15, 2005 5:25 am

here this is the centerpiece that i would like...if u can get itd be really great

Post by **MidwayParts** » Mon Jul 18, 2005 6:25 am

SlideAddictionRPS13 wrote:here this is the centerpiece that i would like...if u can get itd be really great

I did some checking and I cant get those. Those do look hot, though.

Post by **SlideAddictionRPS13** » Mon Jul 18, 2005 9:13 am

dats kool how much would u charge me jus for the two side lights and i guess ill go find the centerpiece elsewhere. Damn i really wanted those too.

Post by **MidwayParts** » Mon Jul 18, 2005 1:31 pm

SlideAddictionRPS13 wrote:dats kool how much would u charge me jus for the two side lights and i guess ill go find the centerpiece elsewhere. Damn i really wanted those too.

Are the side peices factory or are they only associated with that RPS setup?

Post by **SlideAddictionRPS13** » Tue Jul 19, 2005 8:03 am

well from my own experience is that the tailights are the factory ones that u are sellin on the forums.. but the centerpiece i belive that i want is a carbon fiber material which looks just like the factory centerpiece except it just says RPS13 in the middle. Its almost basicall the same except the RPS13. i want that centerpiece instead but i was wonderin if u had the whole kit for sale so i didnt have to buy it piece by piece. so i just wanted to buy the two side lights and then buy the centerpiece elsewhere....if u can help that be much grateful if not its koo i no these pieces are rare

Post by **trublshootr** » Tue Jul 19, 2005 12:01 pm

The carbon fiber center piece that reads "RPS13" is actually an "add-on" type plate that goes over the existing center garnish....basically saying, you can't put on the RPS13 center piece without having the original garnish there first....just FYI...

180sx tail lights

Re: (dantech)

Re: (Florida240sx)

Re: (Rosco)

Re: (dantech)

Re: (dantech)

Finally Updated

Re: (superDorifto)

Re: Finally Updated (pfm101_com)

Re: (Fitz_240)

Re: (BB Turbo)

Re: (Fitz_240)

Re: (dantech)

Re: Finally Updated (ButtaSc0ttch)

Re: (dantech)

Re: (Absolushun)

Re: (dantech)

Re: (SlideAddictionRPS13)

Re: (trublshootr)

Re: (s13det)

Re: (SlideAddictionRPS13)

Re: (dantech)

Re: (SlideAddictionRPS13)

Re: (SlideAddictionRPS13)

Re: (SlideAddictionRPS13)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums