ZX88 type xXX build

General discussion forum about the 240sx, and a great place to introduce yourself to the board!
User avatar
sean@z1
Posts: 654
Joined: Fri Jun 12, 2009 3:29 am
Car: 1993 240sx
Contact:

Post

That is super clean from the start most of the s chassis here are torn up, or rusted


ZX88
Posts: 1086
Joined: Sat Sep 08, 2007 3:59 pm
Car: s13

Post

SUMMER OF 09 finnally time to install my type x stuff.

I had most of my type x aero sitting in my basment for about 3-4 months and now that the weather was getting warmer and school was ending i headed back home to jersey.

along with this waiting for me at home was this prettry peice of fence post welded togther by enjunku.hahahaa

isis pre production i guess duel straight pipe exhaust.

Dart izumi jr FTW

......



install was straight forward. Fitment was good. the exhaust sat a little low near the differental so it took some hose clamps to the hangers and it actually raised it about 3/4 of a inch.







good.

so i decided to next lower the car more to get rid of any wheel gap I had in the front. at this time i also relocated both fender harnesses and rolled both front fenders flat.maxed out the front coils










Modified by ZX88 at 9:50 PM 2/7/2010

User avatar
r34 gtr
Posts: 8909
Joined: Sun Dec 29, 2002 9:33 am
Car: 98 Nissan Frontier XE 4x4
95.5 Audi URS6 Avant 5spd
03 BMW 330i ZHP 6spd
89 Nissan 240SX base CA18DET
Location: Creepin' in your crawl space
Contact:

Post

Hot. It is incredibly rare to see a S13 in such immaculate shape up there in the north, as you call it.

User avatar
spooled240
Posts: 6487
Joined: Sat Jan 20, 2007 8:45 pm
Car: kouki s14

Post

is that exhaust loud? it's just...pipe lol

User avatar
Dittoz7
Posts: 17694
Joined: Thu Sep 07, 2006 4:08 pm
Car: 1997 2f0WtY SE!
Location: Miami, FL

Post

^They Really Have To Start Making Those For The S14.


ZX88
Posts: 1086
Joined: Sat Sep 08, 2007 3:59 pm
Car: s13

Post

so this summer it rained like crazy. it was ridiculous. I was ready to go to with painting my parts but it was crazy humid.

finally i got a break with the weather.

and the tear down for preping the type x aero was started.

i got a brand spanking new type x bumper and fender extensions

sick

ok soo....



like my ghetto lift. yeah me niether.

so the first time i painted the front bumper it came out like s***. for some reason i preped it wrong or it was too hot or hummid when i sprayed the paint never fully cured and would chip and peel very easily. so i drove it and it looked like pure s*** so i needed to redo it.

what a waste

here are some pics from the first time i painted to bumper,



as you can see the paint looked like s*** so i needed to respray it.

well next i bought used rear valences and a wing for a total of 220 for BOTH

rad



ew looks like s***.

here is a cool guy pic from filling up at the gas station lol

and got some dmax lights

with all the pieces on i noticed two things the car was missing exterior wise.

good paint....

and the type x lip.

since the lip was now discontinued i could not find a oem one without having to pay 400+

so i found this company modiride who made a frp replica for 175+shipping.

so i bought it.. and a month later after countless calls and s***ty customer service on modirides parts i recieved lip in one piece.

trew it on there







fitment was great.

repainted every thing and left the wing off for now i need to fill the holes fron the factory spoiler.

here are some pics from the day i had everything on minus the wing with fresh paint on the lip and front bumper.









And at D1 at e-town. my buddy steves imported mr2 and some guys skyline.







and well about a week after that i ran over my lip and cracked it in two.

so i fixed it.



well more to come soon.... interior segment part 2


Modified by ZX88 at 2:28 PM 10/16/2009

User avatar
troskinatior
Posts: 1228
Joined: Thu Apr 23, 2009 1:26 pm
Car: A Two Tone Piggy Coupe
Location: Jersey Shore Bish

Post

love the type xbut dont remember you at d1 thowhere did you get the intena and does it get good reception?

ZX88
Posts: 1086
Joined: Sat Sep 08, 2007 3:59 pm
Car: s13

Post

exhaust clip

.....and some abuse.

f***ing photo bucket my bandwith has been exceeded.

Modified by ZX88 at 11:13 AM 10/19/2009
Modified by ZX88 at 11:16 AM 10/19/2009

l2edken
Posts: 239
Joined: Sun Jun 29, 2008 11:37 am

Post

haha you were at englishtown? i remember seeing the skyline for sale then your car and skipped right over the skyline haha, good exhaust clip too, i wish more exhaust clips were like yours haha

User avatar
slipipinoi
Posts: 212
Joined: Wed Mar 07, 2007 7:52 pm
Car: 91 240sx hatch, Kouki Type-X
Contact:

Post

s13 kouki FTW! :Dyour car is sooo clean, i wish i could get fresh paint on my car ):


User avatar
IDRFT95S14
Posts: 626
Joined: Tue May 27, 2008 5:07 pm
Car: 1995 Nissan 240sx SE
Location: Conroe TX
Contact:

Post

sounds good man

User avatar
nevertheless
Posts: 1378
Joined: Tue Jan 22, 2008 11:12 am
Car: 1993 240sx hatch
1995 Nissan D21
Location: Omaha, Nebraska
Contact:

Post

Is that a TL in the garage? Your car is shuper shweet.

User avatar
White Comet
Posts: 19033
Joined: Thu Jun 15, 2006 7:22 am
Car: fc, s13 and mazda6, Sierra
Location: lancaster, pa

Post

looks good. the type x front looks so much better with the lip, which i'll pick up eventually, but i wont settle for a fiberglass one

User avatar
safin
Posts: 1138
Joined: Sun Jan 21, 2007 6:35 am

Post


User avatar
spooled240
Posts: 6487
Joined: Sat Jan 20, 2007 8:45 pm
Car: kouki s14

Post

damn that exhaust is pretty quite for being a straight pipe, sounds good

ZX88
Posts: 1086
Joined: Sat Sep 08, 2007 3:59 pm
Car: s13

Post

yeah surprisingly its reasonably quiet. just a bit louder than the n1 i had on it before. but it definitely pops more. i back fired in front of a cop once and i thought he would pull my over.

User avatar
240lookis
Posts: 1760
Joined: Thu Jun 05, 2008 10:08 am
Car: 1990 240sx hatch

Post

haha ya. the "i think hes going to pull me over" happens a lot.

i like your car man. looks really nice and clean.

User avatar
spooled240
Posts: 6487
Joined: Sat Jan 20, 2007 8:45 pm
Car: kouki s14

Post

^that's one of the worst feelings from the bottom of my gut XP

User avatar
240lookis
Posts: 1760
Joined: Thu Jun 05, 2008 10:08 am
Car: 1990 240sx hatch

Post

ya cops pulled me over way too much when i was running my 15s with -5 camber out back and scraping everything. i learned to just pull over and give them some space

fourLUG_hero
Posts: 1799
Joined: Wed Apr 11, 2007 8:14 pm
Location: NJ, the place where people know
Contact:

Post

New Jersey is on the come-up, surprisingly.


User avatar
White Comet
Posts: 19033
Joined: Thu Jun 15, 2006 7:22 am
Car: fc, s13 and mazda6, Sierra
Location: lancaster, pa

Post

oh btw, i dont want to thread jack but i saw it was asked on the last page; i did drill into my rockers for the sideskirts

User avatar
tEknoS13
Posts: 1665
Joined: Wed Jan 17, 2007 4:54 pm
Car: 93' Type X

Post

Yea that would be me, as you can see I'm still with that lol. Im gonna do it like it was meant to be, hopefully I don't eff' somethig up.

ZX88
Posts: 1086
Joined: Sat Sep 08, 2007 3:59 pm
Car: s13

Post

NIGHT AND DAY.

installed a tomei t-trax 2way today and all i can say is i wish i did this sooner. the car responses is so awesome, and now i can actually hold a drift. jhahaha

and some fall pics



painted the wing today but no pics


User avatar
Steady_One_S13
Posts: 2168
Joined: Tue Sep 16, 2008 9:42 am
Car: 1991 SR'd 240sx S13, 1993 Toyota SW21 Mr2...
Location: 915
Contact:

Post

That diff looks sweet. I bet your ride handles awesome. Btw, nice pics of the ride.

User avatar
Steady_One_S13
Posts: 2168
Joined: Tue Sep 16, 2008 9:42 am
Car: 1991 SR'd 240sx S13, 1993 Toyota SW21 Mr2...
Location: 915
Contact:

Post


User avatar
White Comet
Posts: 19033
Joined: Thu Jun 15, 2006 7:22 am
Car: fc, s13 and mazda6, Sierra
Location: lancaster, pa

Post

tEknoS13 wrote:Yea that would be me, as you can see I'm still with that lol. Im gonna do it like it was meant to be, hopefully I don't eff' somethig up.
put a little bit of paint on the plastic nubs and have some one help you hold it against the car, line it up right and when you pull it away there'll be little paint marks for where to drill.

i like the fall pics, and good job on getting the tomei, i love the feel of them

User avatar
mRodiek
Posts: 2153
Joined: Fri Mar 07, 2008 9:42 am
Car: Stock Hatch
Location: CHICangeles
Contact:

Post

Aw, I miss fall.

User avatar
tEknoS13
Posts: 1665
Joined: Wed Jan 17, 2007 4:54 pm
Car: 93' Type X

Post

White Comet wrote:put a little bit of paint on the plastic nubs and have some one help you hold it against the car, line it up right and when you pull it away there'll be little paint marks for where to drill.

i like the fall pics, and good job on getting the tomei, i love the feel of them
Thats what I had in mind. Thanks for the tip.

ZX88: Tomei 2 way Diff=

User avatar
PyR0NiAk
Posts: 3851
Joined: Sun Mar 01, 2009 4:29 pm
Car: S13 SR W/ T2 GT3071R .86AR, JWT S4 Cams, 810cc Injectors,Z32 MAF, JWT tuned ECU 87mm 9:1 Compression CP pistons, Manley Rods
Location: Ohio
Contact:

Post

2 things... First, your photobucket took a s*** on you for bandwidth... Second, what spoiler is that?

User avatar
ddgsxr504
Posts: 6024
Joined: Sat Jan 08, 2005 5:50 pm
Car: 1995 Nissan 240SX SE 2007 Infinit M35 Sport 2011 Nissan Pathfinder Silver Edition
Location: The real SoCal

Post

PyR0NiAk wrote:Second, what spoiler is that?
JDM Type X, I second the bandwith thing, f*ckin hate photobucket.

Please fix so we can SEEEEEEE.


Return to “240sx General Discussion”