Is the Attached Pic a TCU/TCM

ONLY for ADVANCED technical discussion about the 240sx!
User avatar
PureD240
Posts: 145
Joined: Tue Nov 18, 2003 2:11 pm
Car: '89 240sx
Contact:

Post

Is this what you would call a TCU/TCM? I am going to buy this if it is. Thanks.


Kiwi_S13
Posts: 129
Joined: Sat Jan 10, 2004 2:17 pm

Post

YES - i think.. its a pretty lame pic but im 99%

User avatar
rico05
Posts: 6895
Joined: Mon Jun 23, 2003 6:52 am
Car: 1992 RMS13 w/ CA18DET
Contact:

Post

Yes

MNIYM
Posts: 26
Joined: Wed Jul 24, 2002 7:43 pm
Car: white 92 S13 w/sil front end

Post

can u put a better picture of that? or tell me where that is in the car? i'm pretty sure mines busted too cause i dont have any linterior lights on in my car too. only after the car warms up. also, if i go into a nissan dealership, if i just says i need a TCU/TCM jammy, will they know?

User avatar
PureD240
Posts: 145
Joined: Tue Nov 18, 2003 2:11 pm
Car: '89 240sx
Contact:

Post

It is located on the driver's side lower kick panel (in the same area as the fusebox). If you remove the kick panel you won't miss it.

If you dash lights don't light up when you turn your lights on, chances are its the TCU. I have one for sale if you need it.

Dustin

MNIYM
Posts: 26
Joined: Wed Jul 24, 2002 7:43 pm
Car: white 92 S13 w/sil front end

Post

email me with a price and condition of the TCU. [email protected] thanx!!

User avatar
ricebike
Posts: 3381
Joined: Sat Feb 15, 2003 7:03 pm
Car: 1989 240sx se 5spd (donated to my brother in law)
2002 Quest
2005 Altima
Location: CNJ

Post

just open it up, find the break in the printed circuit board, n solder it together... i just did this a week ago & i now have dash lights... w00t!

i picked up a solder iron & some solder from the dolla store to boot!


Return to “240SX Technical Forum”