http://www.energysuspension.com/swaybb. ... /endl.html

I have a 91 Q45a and am doing the actsus to standard swap this weekend with the help of Glen(aaacomp). I want to replace the endlink and swaybar bushings at the same time. Does anybody know which sets from energy suspension will fit my car. For the swaybars it is diameter of the bar...but I don't know what my car has on front and rear (Glen thinks 20 rear, 26mm front) . For the endlinks it is the measurement from the endlink to the control arm as per the diagram on the page. Anybody know this? Thanks in advance...George.

Front 28mm 1 1/5" and rear 20mm 4/5"...............:thumbup

7.8120 rear endlink set7.8122 front endlink set9.5163 front swaybar bushing for 28mm (5164 is 28.5 mm)9.5157 rear swaybar bushing for 20mm (5157 is 20.5mm) there is no 20mm ....except 9.5124 (non-greaseable)These swaybar bushings are all greaseable ones...George.

Believe me after having these on my 300z it is definately desireable to have them be greaseable so they rotate easily within the bushings...otherwise you introduce a way too stiff ride..as it reacts too much with the strut movement...my 2cents..

....Just finished installing Energy Suspension polys on my 92Q with standard suspension. Mine required 28mm front (9-5163) and 16mm (9-5154) for the rear. I was able to adapt the rear end link kit (9-8120) to fit. I had to slightly shorten the spacer sleeve to fit exactly...just ground down about 1/8th of an inch. I had to also grind about 1/16th of an inch on the inside edges of the rear bracket holes to align with the bolt holes. It made the ride very tight and hugs the corners. Not sure about the front kit. I just replaced the poly bushings not the entire kit...Ordered mine from Suspension Restoration Parts Company http://www.suspension.com. Had them shipped in about 4 days.

i did check the above website and some other sites too but i ca't find these stuff :

7.8120 rear endlink set7.8122 front endlink set9.5163 front swaybar bushing for 28mm (5164 is 28.5 mm)9.5157 rear swaybar bushing for 20mm (5157 is 20.5mm) there is no 20mm ....except 9.5124 (non-greaseable)

thanks...>>>>>>> just gathering info so that when i'm ready upgrading my suspension, i'll have resources where to look into.

1994 q45 standard 103.7 miles