Home interior sound deadening ideas?

A General Discussion forum for cars and other topics, and a great place to introduce yourself if you are new to NICO!
User avatar
frapjap
Posts: 13175
Joined: Thu Jul 01, 2004 2:46 pm
Car: '99 Pontiac Firebird Trans Am
'07 Subaru Legacy
Location: South Coast Massachusetts

Post

Hey guys, I just moved to a new place and all is well, except that the bedroom door is made of that new modern hollow crap, rendering it "thin" and utterly useless at providing a noise barrier between it and the living room. I want to put something on the back of it to help dampen noise, but don't know what would be best for a noise reduction to dollar value. Aside from a new door (which would probably piss off the landlord), I'm at a loss. The sounds I want to block and/or reduce are voices, television, music, etc.My ideas so far:- Carpet. Might work? Remnants are cheap, but it is heavy.- Foam egg crate. Definitely cheap, light, but don't know how effective it is at dampening.- Dynamat- expensive, and would probably have to replace the door later because of the sticky adhesion stuff..- Thick blanket- ::Shrug:: ?

Ideas?

Modified by frapjap at 7:31 PM 3/15/2010
Modified by frapjap at 7:31 PM 3/15/2010


User avatar
Dattebayo
Posts: 33288
Joined: Sun Aug 25, 2002 10:04 am
Car: 2004 Nissan Frontier Desert Runner
Location: NE DC

Post

Line your walls and ceilings with dead hookers.

User avatar
RCA
Posts: 8225
Joined: Mon Jan 22, 2007 8:09 am

Post

Remove the dry wall and inject foam. Add new dry wall.

User avatar
Mr1der
Posts: 36020
Joined: Tue Sep 02, 2003 8:35 am
Car: It's still not a Nissan...
Location: Lebanon TN

Post

foam would be the best bet.

drill holes and shoot that dude full.

it'll piss your landlord off after you leave and they find it everywhere.

User avatar
frapjap
Posts: 13175
Joined: Thu Jul 01, 2004 2:46 pm
Car: '99 Pontiac Firebird Trans Am
'07 Subaru Legacy
Location: South Coast Massachusetts

Post

Mr1der wrote:foam would be the best bet.

drill holes and shoot that dude full.

it'll piss your landlord off after you leave and they find it everywhere.
RCA wrote:Remove the dry wall and inject foam. Add new dry wall.
Walls are fine, pretty decently constructed. The noisy point is the crappy contractors commodity interior door. It passes sound WAY to easy.

User avatar
Dattebayo
Posts: 33288
Joined: Sun Aug 25, 2002 10:04 am
Car: 2004 Nissan Frontier Desert Runner
Location: NE DC

Post

Get a thick Persian rug that's door sized and hang it up on the door, get a sweeper for the bottom of the door.

User avatar
93coupe
Posts: 12924
Joined: Mon Oct 03, 2005 3:03 pm
Car: crap
Location: Maryland

Post

Who do you live with?

User avatar
frapjap
Posts: 13175
Joined: Thu Jul 01, 2004 2:46 pm
Car: '99 Pontiac Firebird Trans Am
'07 Subaru Legacy
Location: South Coast Massachusetts

Post

Random co worker. Hes quiet and all, but I just like silence. He could play Tiger Woods on the x box and I'd still hear it.

User avatar
Dire91
Posts: 2153
Joined: Sun Feb 10, 2008 12:21 pm
Car: 1997 Nissan 240sx SE
Location: New York

Post

Insulation does well for sound deadening if it isn't already in your walls, thicker dry wall.

User avatar
93coupe
Posts: 12924
Joined: Mon Oct 03, 2005 3:03 pm
Car: crap
Location: Maryland

Post

ITS FOR THE DOOR

User avatar
PapaSmurf2k3
Site Admin
Posts: 19003
Joined: Thu Nov 21, 2002 3:20 pm
Car: 2017 Corvette, 2018 Focus ST, 1993 240sx truck KA Turbo.
Location: Merrimack, NH

Post

93coupe wrote:ITS FOR THE DOOR
Haha, I thought I was the only one that read the original post.
frapjap wrote: Aside from a new door (which would probably piss off the landlord
How do you figure? That s*** is an upgrade. If they do get pissed, just keep the old one and swap it on if/when you leave.

User avatar
hannibal
Posts: 9680
Joined: Wed Sep 11, 2002 2:38 am
Car: Red Line to Glenmont
Location: Washington DC

Post

A buddy of mine has tried the egg crate foam on his door, inside and out. It didnt make much of a difference.

User avatar
Kelbizzle
Posts: 178
Joined: Fri Sep 04, 2009 2:29 am
Car: 91 240SX SR20DET

Post

Ear plugs = Problem solved.

You're welcome.

Edit: I meant that in the nicest way.

User avatar
Crazyirish
Posts: 685
Joined: Sun Sep 16, 2007 8:47 am
Car: Nothing noteworthy at the moment...

Post

Mr1der wrote:foam would be the best bet.

drill holes and shoot that dude full.
This. Your basic home depot stuff should do pretty well.

User avatar
MinisterofDOOM
Moderator
Posts: 30928
Joined: Wed May 19, 2004 5:51 pm
Car: 1962 Corvair Monza
1961 Corvair Lakewood
1974 Unimog 404
1997 Pathfinder XE
2005 Lincoln LS8
Former:
1995 Q45t
1993 Maxima GXE
1995 Ranger XL 2.3
1984 Coupe DeVille
Location: The middle of nowhere.

Post

You should be able to inject expanding foam into the door without making any new holes if you remove the door handle. Or, at the very least, you can keep the new hole hidden by removing the handle and going in through the latch hole.

You could also drill holes in the top of the door where no one will see them (even mud and paint over them after if you want) and fill with foam through them.

User avatar
PoorManQ45
Posts: 16676
Joined: Fri Jul 02, 2004 5:13 pm

Post

Having dealt with helping work on a sound studio i'll chime in here.

You have two issues:

Weight and air gaps.

The way we took care of this in the studio was to use and external weather sealed metal door for the entry to the studio.

The ones that have the seal all the way around. These stop a huge portion of sound right off the bat.

User avatar
PoorManQ45
Posts: 16676
Joined: Fri Jul 02, 2004 5:13 pm

Post

MinisterofDOOM wrote:You should be able to inject expanding foam into the door without making any new holes if you remove the door handle. Or, at the very least, you can keep the new hole hidden by removing the handle and going in through the latch hole.

You could also drill holes in the top of the door where no one will see them (even mud and paint over them after if you want) and fill with foam through them.
New doors are typically "foam core" doors already. So they're already full

Check out Owens Corning OC703. I used that to make some acoustic panels for the house. They are most efficient in the vocal range.

User avatar
numbnuts240
Posts: 32380
Joined: Sat Jul 01, 2006 4:17 pm
Car: 1999 Ford Exploder 4-door 5spd
1974 Datsun Fairlady-Z 250GT
2011 Ford Focus
2010 Mazda 3
Location: TJ

Post

PoorManQ45 wrote:New doors are typically "foam core" doors already. So they're already full
the majority of new interior doors are hollow with luan faces.

ray, take the door off the hinges, drill a hole in the top or bottom, or behind a hinge plate, and fill it with foam. if you get the expanding s***, go slow. let it expand into the available open area, you don't want to rush and have it press out on the faces. then line the top and sides of the frame with foam strip, something like the foam barrier between a radiator and the core support. finally add a sweep to the bottom. that should do it. if not, get rid of the room mate.

User avatar
PoorManQ45
Posts: 16676
Joined: Fri Jul 02, 2004 5:13 pm

Post

numbnuts240 wrote:
the majority of new interior doors are hollow with luan faces.
Eww... the ultra cheap ones. A pack of 10 for $100 I've accidentally put holes in those before...
numbnuts240 wrote:ray, take the door off the hinges, drill a hole in the top or bottom, or behind a hinge plate, and fill it with foam. if you get the expanding s***, go slow. let it expand into the available open area, you don't want to rush and have it press out on the faces. then line the top and sides of the frame with foam strip, something like the foam barrier between a radiator and the core support. finally add a sweep to the bottom. that should do it. if not, get rid of the room mate.
Unfortunately this will not do much.

Expanding foam is a closed cell foam. This will not absorb sound nor will it add enough mass to stop sound.

Are you renting this place?

Typically the frame is crappy too. If you don't mind putting money into this, change the frame and the whole door. As long as it looks like it did before the landlord wouldn't know the difference.

User avatar
numbnuts240
Posts: 32380
Joined: Sat Jul 01, 2006 4:17 pm
Car: 1999 Ford Exploder 4-door 5spd
1974 Datsun Fairlady-Z 250GT
2011 Ford Focus
2010 Mazda 3
Location: TJ

Post

PoorManQ45 wrote:Eww... the ultra cheap ones. A pack of 10 for $100 I've accidentally put holes in those before...
that's typically what's being used these days
PoorManQ45 wrote:Unfortunately this will not do much.
it'll do enough to drown out the majority of the sounds he's trying to eliminate.
PoorManQ45 wrote:Are you renting this place?

Typically the frame is crappy too. If you don't mind putting money into this, change the frame and the whole door. As long as it looks like it did before the landlord wouldn't know the difference.
he is renting, so i wouldn't advise him to start changing frames and the like. landlords don't like the tenants making modifications to their property. depending on how the lease is written, he could at the very least lose his security deposit.

User avatar
PoorManQ45
Posts: 16676
Joined: Fri Jul 02, 2004 5:13 pm

Post

numbnuts240 wrote:it'll do enough to drown out the majority of the sounds he's trying to eliminate.
indeed, it's better then nothing.

I recommend these:http://www.atsacoustics.com/it....html

I purchased a pack of these awhile back.

Cover them with this:

http://www.atsacoustics.com/it....html

Place one and a half on the door. Then use the rest where ever you can. They work great for attenuating vocals and midrange noises.


Return to “General Chat”