FS: S13 VH Project Partout, Mazworx stuff and LOTS MORE

[SuperHatch]

My buddy is parting out his S13 Fastback VH Project. He was working on getting his car together with my help here and there, and he has decided to stop the project. He and his wife are expecting a little one in late Winter and he simply doesn't have the time to dedicate to the project anymore...

Package Deal:

Z32 NA Trans with Mazworx Modified BellhousingZ32 NA Z1 Motorsports Lightweight Fywheel & HD Clutch Combo KitNew OEM Z32 Flywheel BoltsNew OEM Z32 Pressure Plate BoltsNew OEM Throwout BearingMazworx Transmission Adaptor w/ HardwareMazworx S13 w/ Z32 Trans DriveshaftMazworx Z32 Shifter/Bracket/Mount for Z32 install (all hardware included)Z32 Starter

This is everything you need to install a Z32 Trans behind your VH in an S13, minus the motor mounts and headers. Asking price for everything above is $1100 obo, can be shipped but buyer will pay actual freight shipping charges upon delivery.

Complete Z32 brake conversion, F&R, Aluminum calipers and crossdrilled rotors, SPL Conversion SS Teflon Coated Lines, Ebrake cables with brackets and hardware, ebrake assemblies. $400 plus actual shipping.

Complete Q45 Rear Differential conversion with axles, hubs, and S13 rear cover installed. $250 plus actual shipping.

Z33 Seats, modified to bolt into S13. $200 obo plus shipping.

94 VH45 Engine, this was pulled from a 138k mile junkyard car. We never ran this engine, modified the oil pan for 1qt higher oil capacity. No idea of running condition since we never ran it. $250 plus shipping, or local pickup. Includes all sensors and ancilliary stuff. No harness or ECU

92 VH Harness modified to install into S13, all wiring completed by me, harness completely re-loomed and cleaned up. Ready to go... $250 plus shipping.

S13 K-sport coilovers, brand new in box, never installed. $600 obo plus shipping.

Any other part off of an S13 SE Fastback you can think of that you might need, make offers.

Or, buy the whole car as is sits now, minus the coilovers for $3000. All you will need to complete the car are Mazworx headers, motor mounts, a radiator, an ECU, and some misc. hoses and stuff. Buy it with the coilovers uninstalled for $3500. The car is rough, there are rear widebody fenders installed but bodywork isn't finished and they are unpainted. The nose of the car is apart, but all parts are included. This is a project for someone else to complete. Take advantage and get an 75% complete project car on the cheap.

I know, I know, everyone and their mother will want pictures. I'll get some over thanksgiving weekend when I can make it up to his place. He lives about an hour away from me.

email me.... [email protected]
Modified by SuperHatch at 6:16 PM 11/22/2009

[afwfjustin]

Will the harness ONLY work for 94 motors?

I wish you were closer to Atlanta; I'd buy the whole deal. Shipping would just rape me on some of that stuff though.

[SuperHatch]

Will the harness ONLY work for 94 motors?

I wish you were closer to Atlanta; I'd buy the whole deal. Shipping would just rape me on some of that stuff though.

Actually, it was a typo on my part. The harness is for 90-93 motors only.

I can ship the whole car to you for around $600... food for thought.

[IanK]

Any interest in selling just the trans adapter plate, and shifter bracket ? If so, price ?

-Ian

[SuperHatch]

Any interest in selling just the trans adapter plate, and shifter bracket ? If so, price ?

-Ian

I won't sell the trans adaptor without the bellhousing, you need it anyway. And I won't sell the trans shifter/mount/driveshaft separately. If you want that whole setup minus the clutch and starter, we can talk.

Email me please... [email protected]

[IanK]

I emailed you about the adapter plate/bellhousing. LMK man.

[piranhamatt]

I won't sell the trans adaptor without the bellhousing, you need it anyway. And I won't sell the trans shifter/mount/driveshaft separately. If you want that whole setup minus the clutch and starter, we can talk.

Email me please... [email protected]

If this happens, I am interested in the clutch and starter.

[SuperHatch]

I emailed you about the adapter plate/bellhousing. LMK man.

If this happens, I am interested in the clutch and starter.

I really don't want to separate the trans bellhousing and adapter from the shifter/mount/driveshaft.

I would sell the Shifter/Mount/Driveshaft/Bellhousing/Adaptor for $650

I would sell the Clutch/PP/Flywheel/Starter for $400

Shipping would be additional to both.

[WYT R1CE]

How about if I ship you my stock bellhousing. How much for the adapter and modified housing. I'll send a shipping label with the stock housing. Shoot me an email I don't get on here much [email protected]

[1WheelWonder]

Coilovers still available? If so send me a email at [email protected] for paypal addy and a total.

[SuperHatch]

Emails sent...

[Arrow]

Do you have any pictures of the Z33 seats? Also what would shipping be on them to 27617.

[IanK]

If you still have the Shifter/Mount/Driveshaft/Bellhousing/Adaptor combo for sale in a week or so, I'll def pick all of it up.

-Ian

[scir16v]

Trans adapter still available?

[subtle_driver]

I'm interested if I can use it to convert my 1990 Q45 to stick. LMK

[robunicu]

hey im interested in the bellhousing and adapter plate, email me at robunicu at hotmail

[WYT R1CE]

Will the harness work on a 95?

[WhiteKnight]

Do you have the console lighter socket?