whats is the fastest way reaching 350-400 hp on stock RB20det motor?

[fmendoza2929]

Hi anyone out there if you can please share your knowledge, expertise, experience, or guidance tip on how would it be possible to reach 350HP-400HP on a bone stock RB20det in a s14 chasis without having to do internal work to the motor.

[Cjmartz2k]

Bigger turbo and supporting mods.

[maryjane]

z32 maf, larger injectors, turbo, rom tune ecu

[fmendoza2929]

what kind of turbo would you recomend for a rb20det and what supporting mods would you need?

[fmendoza2929]

what kind of injectors, and rom-tune would you agree with nistune?

[DriftingisLame]

Freakin search man, every one of your questions so far are either not applicable to this forum or easily found with a search. I really dont like being an a-hole, but this forum has been flooded with newb questions lately. If you're serious about doing this stuff, do some READING, start with the button labeled SEARH.

[Cjmartz2k]

I have made about 5 lists complete of as I can think about what supporting mods you need. Try searching posts under my user name.

For turbo, 400rwhp, or at the motor? Wheels, Holset HX35. Motor, T3/TO4e or even something smaller.

[fmendoza2929]

hey man its okay i understand you have had a bad day at work and youre only way to take the load off is to act like a pr*ck with a person who is simply try to build up a rb20

[fmendoza2929]

Thanks

[dizzywithsunstroke]

he's right man. i have read countless thread about this same topic.

[Carl H]

blatantly copy my setup, it works.gt3076rtomei cams 260*/8.9mm z32 maf720cc injectorsfull on rom tune18-22psi

at a minimum 550cc injectors...will not support more than 380whp.may ways to an end goal, this is just one.

[ST240]

blatantly copy my setup, it works.gt3076rtomei cams 260*/8.9mm z32 maf720cc injectorsfull on rom tune18-22psi

at a minimum 550cc injectors...will not support more than 380whp.may ways to an end goal, this is just one.

Hows the lag on that setup?

[Carl H]

not as bad as you think...with the .63ar turbine housing i saw 14psi by 4.2k or so.with the atp twin entry .78 im seeing it at 4.5k.it makes power but im not gonna lie, its laggy on the street...definately a good track setup tho.