finally my sr20 build

[brn-n-jpn]

I am finally making a thread for my build. I have an 89 hatch with a red top sr20. Other than the boost gauge, everything on the car is the way i bought it. I bought the car in December 2008 and paid $3600. Not bad for a running project car. this 240 #6 for me and the second sr. The plan for this one is 350-400whp with good boost response and mid- high range power.

[blacksrjdm]

Fail without pics... useless thread. this isnt a build thread...your just bragging.

[brn-n-jpn]

[steeda763]

Fail without pics... useless thread. this isnt a build thread...your just bragging.

lol +1

[Logan76]

wow thats a Ghetto IC bracket there, a peice of metal strapped looped over your hood latch.

[brn-n-jpn]

yes the IC support is very bad but it is better than the way the previous owner had it. he just had the IC resting on the inside of the bumper causing the bumper to droop. That was a quick fix i did til i made the other brakets to take the stress off the bumper.

[brn-n-jpn]

the part list:red top sr20apexi intakecustom 3" catback exhaustdual slim fanskoyo radfmic with sh**y custom pipinggreddy bov300zx TT calipers front and rearStance GT coilovers
Modified by brn-n-jpn at 9:11 AM 3/3/2009

[brn-n-jpn]

I m currently deployed to Iraq but I have been spending this extra money on the build.Parts that have been ordered or already have;In the mail:Full-race twin scroll dual wastegate manifoldGT3071 turbo2 44mm tial WGFull-race 3" downpipeTial Q BOVSard top fed fuel railSard FPRSard 800cc injectorsbillet aluminum 90mm throttle bodyKu_engineering velocity stack intake manifold

Already at the house:S15 black housing headlightsS15 front bumperIchiba 5 lug conversion kit300ZX TT calipers f/r

I will post the pics of the other parts as soon as they come in the mail and my pops sends me the pics to my email
Modified by brn-n-jpn at 8:51 AM 2/18/2009

[brn-n-jpn]

got some of the new parts in the mail. Can't wait until I leave iraq so i can actually finish my build.

sard top feed fuel rail

KU_ENGINEERING 90mm billet throttle body

KU_ENGINEERING intake manifold
Modified by brn-n-jpn at 9:51 PM 3/2/2009

[s13gebala]

army money is funny money

btw, your video The action that you were trying to perform has failed.

[White Comet]

nice parts, but clean up everything when you get back

[sbird1]

Is this going to be an engine build or are you just going to buy every bolt-on you can think of? Not trying to be a d!ck here. Just wondering.
Modified by sbird1 at 11:45 AM 3/3/2009

[sean8564]

nice pictures just clean up some wires under the hood and you will have a great flip/ project car.

[brn-n-jpn]

yes a full wire tuck is one of the first things i am getting done... but right now since i am deployed im using this good army pay to get the parts for the build.

once i finish ordering the parts for intake and the exhaust sides of the motor, i'm moving on to the internals and drivetrain then suspension components


Modified by brn-n-jpn at 2:56 PM 3/3/2009

[Stripes]

Def needs some work. Let me know what you think of that manifold.

[brn-n-jpn]

this will be and engine build not just bolt-ons like everyone else

anyways recieved some more parts it the mail recently

OEM S15 hood hinges

Z32 fuel filter

2- 44mm WG

50mm Tial Q bov

Sard type RJ FPR w/ adapter
Modified by brn-n-jpn at 11:27 AM 5/3/2009

[MastaYu]

nice parts

[brn-n-jpn]

quick update on more parts I just recievedwalbro 255lph

AEM wideband

clutchmasters clutch & 13lbs flywheel-rated @ 455hp 399tq

coolant resevoir, hate those huge aluminum ones this one will be hidden under rad support

Z32 brake master cylinder and brake pads

turbo timer harness and Z32-S13 brake master cylinder fitting

Modified by brn-n-jpn at 5:55 AM 5/4/2009
Modified by brn-n-jpn at 6:00 AM 5/4/2009

[DanThaMan]

at your exhaust hanger, nice parts BTW.

[Didderson]

Lol dude burnout in the Red rose commons parking lot. That's a great parking lot to have fun in, one of my fav spots.

Looks like u have a bit of work ahead of you. Round these parts we don't like to fix intercoolers with metal straps like that, but I figure you'll redo it again someday.The coolant reservoir can't be below the fluid level unless it is designed to do do so.

[brn-n-jpn]

Yea a lot of stuff on this car currently are rigged just so they stay in place. Only being home for 10 days when I bought the car, had to do a lot of things done on the fly while I took care of other issues before I left for Iraq. the exhaust used to only have a hanger by the cat, and the intercooler was being hed up by the bumper. That is the wasy it came when I bought it and thats why everything is getting rebuild, refreshed and or replaced: as soon as I get home from Iraq that is.

And yes Tom that parking lot is my favorite to go have a little fun in from time to time.

[brn-n-jpn]

just got the Z32 ebrake assembly in as well
Modified by brn-n-jpn at 10:25 AM 5/4/2009

[freakyjason]

Wow! There is a good bit of money being thrown around here! Looks like a pretty good build too! Keep up the good work!

[mrgreeneyes]

lots of top shelf parts, my friend. im glad to see this monstrosity turning into a beauty.

but yeah, once your a** is home, we will tear into her and fix all that haggard mess the previous owner called an S13...

btw, check my thread.

[brn-n-jpn]

yeah i know can't wait to get home but I think im going to try and find a bette shell because this one has a good bit of rust behind gas tank

[n_bushaw]

looking good. nice toy list thus far. SUBSCRIBED

[slidenastyjosh]

i love the sr.

[Didderson]

Nice JDM newspaper man.Oh yea and good choice on the parts. I dig.

There will be no death for this 240. You know what I mean

[j-z]

this nigga aint fuccking around.... TWO tial 44mm wastegates..... cant wait to see what turbo you choose to go with, and the manifold that is made for this car. i believe this guy is looking for HUGE numbers. throttle body looks tits man.

[s3teen]

just got the Z32 ebrake assembly in as well

Modified by brn-n-jpn at 10:25 AM 5/4/2009

Where did you get the s13 300zx ebrake extensions?