UPDATED! Z and G wheels on a 240sx picture thread! 350z g35 z33 z32! | First < 1 2 3 > Last |
|
| Author |
Post |
dtowndrifter
Offline
173 posts
s-14 kouki
dallas TX
10-19-2005
|
| « Re: Z and G wheels on a 240sx picture thread! 350z g35 z33 z32 (simmode1) | 11:13 PM 2/3/2009 |
|
maxed out on Tein ss coils..
|
vangj
Offline
157 posts
Cars, Sports
St. Paul MN
2-21-2003
|
| « Re: Z and G wheels on a 240sx picture thread! 350z g35 z33 z32 (dtowndrifter) | 8:25 AM 2/4/2009 |
|
With spacers or without?
|
dtowndrifter
Offline
173 posts
s-14 kouki
dallas TX
10-19-2005
|
| « Re: Z and G wheels on a 240sx picture thread! 350z g35 z33 z32 (vangj) | 9:40 PM 2/4/2009 |
|
| Quote, originally posted by vangj » | | With spacers or without? | 5mm spacers in front....pretty flush in the rear...i cant put my finger inbetween..all rolled fenders.
|
vangj
Offline
157 posts
Cars, Sports
St. Paul MN
2-21-2003
|
| « Re: Z and G wheels on a 240sx picture thread! 350z g35 z33 z32 (dtowndrifter) | 7:22 AM 2/5/2009 |
|
Not bad. So no spacers required for the back to look close to flush then? How did it look without spacers up front? Do you have pictures showing the wheels from the rear and front?
|
dtowndrifter
Offline
173 posts
s-14 kouki
dallas TX
10-19-2005
|
| « Re: Z and G wheels on a 240sx picture thread! 350z g35 z33 z32 (vangj) | 10:33 PM 2/5/2009 |
|
| Quote, originally posted by vangj » | | Not bad. So no spacers required for the back to look close to flush then? How did it look without spacers up front? Do you have pictures showing the wheels from the rear and front? | i dont have a pic with the view of a photoshot like you mentioned...They just look a lil more sunken in...maybe a 5mm spacer will make it touch the fenders in front..there is about an inch between the tire and fender in front...they did rub..then i rolled them..the rears are flush..But you gotta think now, these are stock nissan track wheels... not works or no super wide wheel...225/40 front ...245/40 rear...8 inch in front.. 8 1/2 in back..
|
daconkiftador
Classified$ P0st Wh*re

Offline
2538 posts
'92 Coupe SE, '83 Rabbit GTi
Clarkston WA
1-14-2006
|
^^ do you have anymore pictures, maybe closer up and high def?
 FS: DOHC KA24DE Timing Chain Kit, OEM(yes real Nissan) Brand-New! eMail me.
|
simmode1

Offline
3707 posts
1993 chuki & 1996 zenki
Euless TX
8-17-2007
|
| « Re: Z and G wheels on a 240sx picture thread! 350z g35 z33 z32 (dtowndrifter) | 6:39 PM 2/7/2009 |
|
Better late than never, right? Anyways, Z33 05+ wheels. 18x8.5+33 with 225/40/18 all around. Spring and strut setup with no spacers. 


Fronts
 Rears

| Quote, originally posted by Broadfield » | To me fitment is a combination of the wheel AND tire. A 225 tire on a 10" wide wheel doesn't "fit". It's like seeing a 6'2" guy walk around with 30" inseam jeans.... it looks F'n stupid |
S13 Project Cloud current status: KYB AGX shocks/struts, Tein S-Tech springs, Suspension Techniques front/rear sway bars, Ebay front/rear strut bars, Hawk HPS brake pads, Powerslot Slotted Rotors, Agency Power braided brake lines w/Motul fluid, Exedy Stage 1 Racing Clutch, Fidanza Aluminum Flywheel, AEM short ram, Ebay X-tune Header, Circuit Sports dual tip catback exhaust. Wheels: 16x8.5+27 Kosei K1's with 225/45/16's. S14 Project V.Valentine current status: Tokico Blue shocks/struts, Eibach Pro springs, 18x8.5+33 Z33 Anniversary wheels all around
|
vangj
Offline
157 posts
Cars, Sports
St. Paul MN
2-21-2003
|
| « Re: Z and G wheels on a 240sx picture thread! 350z g35 z33 z32 (simmode1) | 7:45 AM 2/9/2009 |
|
Looks good. The guy I was going to buy from sold them already, so gotta look again. Thanks.
|
simmode1

Offline
3707 posts
1993 chuki & 1996 zenki
Euless TX
8-17-2007
|
| « Re: Z and G wheels on a 240sx picture thread! 350z g35 z33 z32 (vangj) | 9:10 AM 2/9/2009 |
|
Should have jumped on them, man! Good luck finding these at that price again.
|
vangj
Offline
157 posts
Cars, Sports
St. Paul MN
2-21-2003
|
| « Re: Z and G wheels on a 240sx picture thread! 350z g35 z33 z32 (simmode1) | 1:05 PM 2/9/2009 |
|
I know. I was second in line and unfortunately the other person decided they wanted it.
|
Hoffman5982
Offline
576 posts
red s14
dothan AL
9-29-2007
|
| « Re: Z and G wheels on a 240sx picture thread! 350z g35 z33 z32 (vangj) | 8:44 PM 2/16/2009 |
|
anyone have a pic of a red s14 with 18" g35 rims?
Funniest joke ever:
| Quote, originally posted by Lonismos14 » | | HEY LITTLE s*** YOUR DAD WAS A BULLDOG AND YOUR MOM WAS A s***ZU AND THEN OUT CAME YOU A BULLs***. BEING THAT YOUR DAD WAS IN THE ARMY A BULLs*** BRAT | /sarcasm
|
Hoffman5982
Offline
576 posts
red s14
dothan AL
9-29-2007
|
| « Re: Z and G wheels on a 240sx picture thread! 350z g35 z33 z32 (vangj) | 10:21 AM 2/18/2009 |
|
noone?
|
kirk

Offline
83 posts
1993 240sx
Moore ok
7-8-2005
|
| « Re: Z and G wheels on a 240sx picture thread! 350z g35 z33 z32 | 8:57 AM 2/19/2009 |
|
I should have posted this a while ago... Fronts 215/40 Dunlop Direzza Z1 Star Spec
Rears 245/40 Michelin Pilot Primacy









No roll (needs it in the rear, rubs tires once in a while) Frame ground clearance is like 3"
|
simmode1

Offline
3707 posts
1993 chuki & 1996 zenki
Euless TX
8-17-2007
|
| « Re: Z and G wheels on a 240sx picture thread! 350z g35 z33 z32 (kirk) | 9:59 PM 2/19/2009 |
|
^^^Very nice... Its good to see that just beacuse you've got Stance coils doesn't mean you gotta slam your ish.
|
Scuffed_ChukiCoupe

Offline
2953 posts
93 hatchington w/ hud
Brooklyn NY
7-9-2007
|
| « Re: Z and G wheels on a 240sx picture thread! 350z g35 z33 z32 (simmode1) | 2:57 PM 2/20/2009 |
|
Yea real nice^. Im going for those base model g35 17's for mine. Id love to get those 350z wheels too.
 idiot on b20vtec speaking about what his garage would look like if he had $ "if i was a billionare mines would look like that too, excepts it wouldve been full of Old skool Hondas toyotas and Nissans, and Some American Muscle, And Barely any Foriegn cars"
|
fiznowler

Offline
330 posts
97 240sx se
springfield mo
5-7-2007
|
| « Re: Z and G wheels on a 240sx pic ... (Scuffed_ChukiCoupe) | 2:55 PM 2/24/2009 |
|
Here is mine with the sexy z wheels. All stock w/ stock 350z tire sizes. I know it needs lowered I am in the process!
 _

| Quote, originally posted by numbnuts240 » | | there is nothing on this green earth more romantic than roofies. |
| Quote, originally posted by Jesda » | | I want that sloppy mess in my face. All over my face. |
| Quote, originally posted by ghx407 » | | JDM pep boys stuff is just as bad as USDM pep boys stuff. |

|
k_c_b
Offline
259 posts
98' 240 SE
Tahlequah OK
12-28-2007
|
^it'll be crushin once you lower it =D

|
SketchyRollin564

Offline
3648 posts
1995 240sx with b16 swap and nos
Boca Raton, South Florida
3-24-2007
|
| « Re: (k_c_b) | 5:09 PM 2/26/2009 |
|
^ thats gonna be sick once you lower iti have z32 TT wheels on mine now, i have pictures on my friends camera, im just waiting for him to send them to me

|
R-Yahne_240

Offline
195 posts
90 XE SR Coupe
Portsmouth va
12-22-2005
|
| « Re: (SketchyRollin564) | 8:10 PM 2/27/2009 |
|
the red vert is my boy rj's car he has a silvia front tooo mint
<So I went drifting today in my civic!!! 13.5 @108 12psi t25tiguy2000 (March 31 2008 05:18 PM) lool, love how a 70K Nissan gets compared to 200K Porsches. SHIFT_HATERS! FTMFW (new GT-R)
|
R-Yahne_240

Offline
195 posts
90 XE SR Coupe
Portsmouth va
12-22-2005
|
| « Re: Z and G wheels on a 240sx picture thread! 350z g35 z33 z32 (dlydrvn240) | 8:14 PM 2/27/2009 |
|
i had some 300 zx tt polished wheels on my old sr hatch (sold) lookin at this thread is gonna make me 5 lug swap my new coupe now now what wheels should i get im thinkin some of the new 370z wheels oem fresh
|
k_c_b
Offline
259 posts
98' 240 SE
Tahlequah OK
12-28-2007
|
I don't think 370z wheels would look good on an s-chassis, 19s would be hard to make look good
|
vangj
Offline
157 posts
Cars, Sports
St. Paul MN
2-21-2003
|
| « Re: (k_c_b) | 6:08 AM 3/18/2009 |
|
So I just went and bought some G35 18" rims yesterday and threw them on my car lastnight, Kouki. No pictures yet.I had a question to see if you guys know the answer. I believe all 4 rims are 18x8 +30, they also said 18x8 and 30 inside of the spokes. The rear rims also said "Rear" and the front rims also said "Front" inside of a spoke. Do you guys know if the fronts can be used for rear and rears and be used for front? Any idea why they marked them? Maybe just because of the staggared tire fitment? I plan on using same size tires all around, maybe 225/40 or something. Also, I still have the stock 225/45 and 245/45 on the rims. The front rims sit pretty close to my coilover. The rears sit fine. The rim is maybe about a half inch away and the tire is probably a little closer since it sticks out a little over the rim. Will I be okay as long as it's not touching?
Modified by vangj at 2:27 PM 3/18/2009
|
nightsauce

Offline
737 posts
1991 s13 hatch
newark NJ
6-19-2008
|
| « Re: (vangj) | 8:58 PM 3/25/2009 |
|
mine =D
 i am one of the few that have patience with electrical wiring..
|
simmode1

Offline
3707 posts
1993 chuki & 1996 zenki
Euless TX
8-17-2007
|
| « Re: (vangj) | 11:06 AM 3/26/2009 |
|
| Quote, originally posted by vangj » | | So I just went and bought some G35 18" rims yesterday and threw them on my car lastnight, Kouki. No pictures yet. I had a question to see if you guys know the answer. I believe all 4 rims are 18x8 +30, they also said 18x8 and 30 inside of the spokes. The rear rims also said "Rear" and the front rims also said "Front" inside of a spoke. Do you guys know if the fronts can be used for rear and rears and be used for front? Any idea why they marked them? Maybe just because of the staggared tire fitment? I plan on using same size tires all around, maybe 225/40 or something. Also, I still have the stock 225/45 and 245/45 on the rims. The front rims sit pretty close to my coilover. The rears sit fine. The rim is maybe about a half inch away and the tire is probably a little closer since it sticks out a little over the rim. Will I be okay as long as it's not touching? Modified by vangj at 2:27 PM 3/18/2009
|
As per the link on the first page of this thread, those wheels are the same size. Nissan just put different sized tires on them. That's a pretty lame way to stagger a setup IMO. I don't see any reason you couldn't switch them around provided that you used to same size tires all around...
|
pndjones
Offline
40 posts
1995 240sx
Clarksville TN
10-9-2008
|
| « Re: Z and G wheels on a 240sx picture thread! 350z g35 z33 z32 (vangj) | 11:41 AM 4/3/2009 |
|
thanks for all those pics. I love stock wheels and but i like so many of them i didn't know which ones i like the most but now that i see them on 240s i can get a better visual. thanks
|
jdm_240$x

Offline
56 posts
1990 nissan 240sx
lenoir city tn
2-4-2009
|
| « Re: Z and G wheels on a 240sx picture thread! 350z g35 z33 z32 (adrians_s13) | 12:43 AM 4/13/2009 |
|
damn thats nice!!!!!!
|
iseenem240SX
I weigh 240 and drive one
Offline
191 posts
1998 240SX SE
Los Angeles/Ventura County CA
8-23-2005
|
| « Re: (simmode1) | 8:59 PM 4/13/2009 |
|
| Quote, originally posted by simmode1 » | As per the link on the first page of this thread, those wheels are the same size. Nissan just put different sized tires on them. That's a pretty lame way to stagger a setup IMO. I don't see any reason you couldn't switch them around provided that you used to same size tires all around... |
I was about to ask the same thing, just picked up a sweet set of Touring V.1's for $300 with staggered tires, but will be running the same tire size eventually, once I get it lowered too.
|
vangj
Offline
157 posts
Cars, Sports
St. Paul MN
2-21-2003
|
| « Re: (iseenem240SX) | 1:04 PM 4/17/2009 |
|
I can finally post mine! Here ya go!Specs: Tanabe Sustec Pro-5 coilovers z32 Brakes No spacers

|
nissan_star

Offline
433 posts
2000 maxima se and 1993 240sx vert (5sp!!!)
St. Louis MO
12-10-2007
|
| « Re: (vangj) | 11:51 AM 4/22/2009 |
|
this thread is awesome
|
fiznowler

Offline
330 posts
97 240sx se
springfield mo
5-7-2007
|
| « Re: (vangj) | 1:06 PM 4/22/2009 |
|
Those wheels look good on the red kouki !! Very sharp
|
iseenem240SX
I weigh 240 and drive one
Offline
191 posts
1998 240SX SE
Los Angeles/Ventura County CA
8-23-2005
|
| « Re: (fiznowler) | 6:29 PM 4/27/2009 |
|
Finally got my 350Z Touring V.1 wheels on, they are factory staggered 225/45 in front and 245/45's in back. 18 x 8's all around with a +30 mm offset. Picked up a clean set for $300 with tires. Tires have some rot from sitting out in the guy's back yard and have 70% tread on them, so I will need to buy a new set soon for safety's sake. I'll probably run the same size all around so I can rotate them, but until then the staggered set up will have to do. AND I KNOW I NEED TO LOWER IT!!!!!!!!! Saving up for some coilovers too, no worries  Before
 After
 And now for some other angles aka whorage. Sits pretty flush, no roll, clears stock suspension, some jerk scraped my bumper a few months back and didn't leave me insurance info, I'm just glad it wasn't worse. Left side.
 Right side
 Random




Modified by iseenem240SX at 11:56 PM 4/29/2009
|
DRO916

Offline
26 posts
Sacramento, CA
1-11-2004
|
| « Re: Z and G wheels on a 240sx picture thread! 350z g35 z33 z32 (dtowndrifter) | 2:14 PM 7/25/2009 |
|
Please do keep this thread alive
[atl dojo] - <a href="http://www.angelfire.com/empire/916">www.atldojo.tk
|
simmode1

Offline
3707 posts
1993 chuki & 1996 zenki
Euless TX
8-17-2007
|
| « Re: Z and G wheels on a 240sx picture thread! 350z g35 z33 z32 (DRO916) | 8:19 AM 7/26/2009 |
|
| Quote, originally posted by DRO916 » | Please do keep this thread alive |
It needs to be stickied, IMO. I get tired of having to look for it when ppl when questions...
|
jaek

Offline
10 posts
97 240sx bone stock
Santa Clara CA
12-20-2007
|
| « Re: Z and G wheels on a 240sx picture thread! 350z g35 z33 z32 (simmode1) | 1:51 AM 7/30/2009 |
|

|
simmode1

Offline
3707 posts
1993 chuki & 1996 zenki
Euless TX
8-17-2007
|
| « Re: Z and G wheels on a 240sx picture thread! 350z g35 z33 z32 (jaek) | 11:07 AM 7/30/2009 |
|
^^^ Now thats what I'm talking about. Very sexy. What suspension and tire sizes are you running?
|
SmithSR
Moderator

Offline
5755 posts
240sx
Western WA
2-23-2003
|
Will sticky the post ASAP. That first car is lookin good !
| Quote, originally posted by snwbrdr435 » | | Only imperial stormtroopers are so precise. |


|
Clawhammer
Sir Rocksalot

Offline
2939 posts
RPS13
Gainesville/Clearwater FL
12-29-2006
|
Hahaha I love that first car!

|
DRO916

Offline
26 posts
Sacramento, CA
1-11-2004
|
| « Re: Z and G wheels on a 240sx picture thread! 350z g35 z33 z32 (jaek) | 5:18 PM 8/7/2009 |
|
| Quote, originally posted by jaek » | 
|
Looks almost like mine...but mines lower 17" Z wheels before drop

 18" Z wheels before drop
 18" Z wheels after drop

|
DRO916

Offline
26 posts
Sacramento, CA
1-11-2004
|
| « Re: Z and G wheels on a 240sx picture thread! 350z g35 z33 z32 (DRO916) | 10:50 PM 8/18/2009 |
|
Here's anotherNeed to roll my fenders before I add spacers
|
k_c_b
Offline
259 posts
98' 240 SE
Tahlequah OK
12-28-2007
|
| « Re: Z and G wheels on a 240sx picture thread! 350z g35 z33 z32 (DRO916) | 8:36 AM 8/19/2009 |
|
^lookin hotttt
|
| First < 1 2 3 > Last |