RB20 S14 Please help me!!!!!!!!

[dizzywithsunstroke]

these are the wires from my wiring harness to my stock rb20 mass air flow sensor. i know which pin on the maf is which but i dont know which wire is which. the far left is yellow with a red stripe, the next one is solid white. the 3 on the right are paired together. the first is a bare wire, the second is solid white and the 3rd is solid black. help me out guys. thanks a ton.

[Carl H]

not stock wiring, you'll need to strip the electical tape back.

[dizzywithsunstroke]

thanks a lot carl. i peeled the electrical tape back to reveal this.



from left, 1st is black w/ silver spots, 2nd is black w/ white stripe and silver spots, 3rd is bare wire that wraps around 4th and 5th, 4th is solid white, and 5th is solid black. which is which? can anyone help me now? thanks

[DriftX]

sorry for the terrible picture, i was trying to hurry before work. I hope this helps:



top to bottom in the pic is:black/whiteSolid whiteBlack/grey tracersolid blackblank pin

So tab up on plug, left to right.

[DriftX]

[dizzywithsunstroke]

thank you so much man. really helped me out!