redtop91
Meat Gazer
Offline
16404 posts
↑ ↑ ↓ ↓ ← → ← → B A Start
Broken Arrow OK
9-7-2006
|
| « Re: My SR20DET GT3071R Twin Scroll Build-Up (ElNegro) | 7:58 PM 6/10/2008 |
|
Subscribed. Looks great man. I want to see your dyno sheet when you are done and compare the TS to SS. 
|
Sabot
Offline
1025 posts
S14 on S14, S13 on S13, EVO X
Fountain CO
12-11-2004
|
| « Re: My SR20DET GT3071R Twin Scroll Build-Up (redtop91) | 5:12 AM 6/11/2008 |
|
Looking good keep it up and more pics as you go along ofcourse 
s13___________________s14____________________Stock no more EvoX______
  
|
inkslingers13
Offline
1063 posts
1985 Corolla Gt-S
not in Co. anymore. TEXAS. TX
12-4-2007
|
| « Re: My SR20DET GT3071R Twin Scroll Build-Up (Sabot) | 8:48 AM 6/11/2008 |
|
man that takes alota money!!! looking sick!!! why didn't you go with the 3076r? just wondering  good job keep updates!!!
EMAIL ME AT meyerssr@comcast.netI'm in COLORADO, if you are to, email me^^^  i love my s13 Sig exceeds 600x200 limit
|
ElNegro
Offline
1501 posts
92 S13 Coupe
Klamath Falls Oregon / Nor Cal
1-24-2004
|
| « Re: My SR20DET GT3071R Twin Scroll Build-Up (inkslingers13) | 4:54 PM 6/11/2008 |
|
Yeah, I've been dumping a lot of money into this! Sucks being a college student, it takes forever!!! Haha  I wanted the extra boost response/lower end, that's why I went with the 71R. I'll be able to make plenty of power with this turbo, haha.
|
david200095367
Offline
1608 posts
91 fastback 93 coupe w/s14 sr20det 98 s14 kouki
TriCities WA
3-29-2004
|
| « Re: My SR20DET GT3071R Twin Scroll Build-Up (ElNegro) | 12:51 AM 6/12/2008 |
|
looks great man. cant wait to see it running.
|
ElNegro
Offline
1501 posts
92 S13 Coupe
Klamath Falls Oregon / Nor Cal
1-24-2004
|
| « Re: My SR20DET GT3071R Twin Scroll Build-Up (david200095367) | 5:53 AM 6/12/2008 |
|
| Quote, originally posted by david200095367 » | | looks great man. cant wait to see it running. |
Wow, haven't heard from you in days bro! When you coming through again? I may be going up to WA for a week sometime this Summer (around Federal Way), so I thought about swinging by to say what's up! lol
|
inkslingers13
Offline
1063 posts
1985 Corolla Gt-S
not in Co. anymore. TEXAS. TX
12-4-2007
|
| « Re: My SR20DET GT3071R Twin Scroll Build-Up (ElNegro) | 10:19 AM 6/12/2008 |
|
very nice set up, keep the pics flowing  get that $hit mocked up and snap some pics!
|
ElNegro
Offline
1501 posts
92 S13 Coupe
Klamath Falls Oregon / Nor Cal
1-24-2004
|
| « Re: My SR20DET GT3071R Twin Scroll Build-Up (inkslingers13) | 10:48 AM 6/12/2008 |
|
| Quote, originally posted by inkslingers13 » | | very nice set up, keep the pics flowing get that $hit mocked up and snap some pics! |
I'm starting the assembly next monday, so there will be crap loads of pictures posted! haha
|
inkslingers13
Offline
1063 posts
1985 Corolla Gt-S
not in Co. anymore. TEXAS. TX
12-4-2007
|
| « Re: My SR20DET GT3071R Twin Scroll Build-Up (ElNegro) | 11:06 AM 6/12/2008 |
|
very nice! cant wait!
|
david200095367
Offline
1608 posts
91 fastback 93 coupe w/s14 sr20det 98 s14 kouki
TriCities WA
3-29-2004
|
| « Re: My SR20DET GT3071R Twin Scroll Build-Up (ElNegro) | 11:27 PM 6/13/2008 |
|
yea i know bro. ive been real busy with school. but yea federal way is pretty far from me like 4 hrs. im in eastern wa. so if you come on us97 then you might be coming thru tri-cities. Do you happen to have a ka tranny harness? i blew my sr so i need to swap in my ka for now. david200095367@yahoo.com or hit me up on aim rare240sx.
|
X-MAN510
Offline
72 posts
SR powered 180sx aka "Boostin-Star"
Union City CA
10-25-2007
|
| « Re: My SR20DET GT3071R Twin Scroll Build-Up (ElNegro) | 3:01 PM 6/14/2008 |
|
Looking sweet! That thing should spool real fast diving into corners.
|
Sabot
Offline
1025 posts
S14 on S14, S13 on S13, EVO X
Fountain CO
12-11-2004
|
| « Re: My SR20DET GT3071R Twin Scroll Build-Up (X-MAN510) | 6:30 AM 6/15/2008 |
|
So...are we getting a write-up on YOUR GTI-R ITB's set-up? 
|
ElNegro
Offline
1501 posts
92 S13 Coupe
Klamath Falls Oregon / Nor Cal
1-24-2004
|
| « Re: My SR20DET GT3071R Twin Scroll Build-Up (Sabot) | 5:09 PM 6/15/2008 |
|
| Quote, originally posted by Sabot » | | So...are we getting a write-up on YOUR GTI-R ITB's set-up? |
Eventually, lol
|
ElNegro
Offline
1501 posts
92 S13 Coupe
Klamath Falls Oregon / Nor Cal
1-24-2004
|
| « Re: My SR20DET GT3071R Twin Scroll Build-Up (david200095367) | 5:10 PM 6/15/2008 |
|
| Quote, originally posted by david200095367 » | | yea i know bro. ive been real busy with school. but yea federal way is pretty far from me like 4 hrs. im in eastern wa. so if you come on us97 then you might be coming thru tri-cities. Do you happen to have a ka tranny harness? i blew my sr so i need to swap in my ka for now. david200095367@yahoo.com or hit me up on aim rare240sx. |
That sux bro! Sorry to hear about that. Don't have a spare harness though  Yeah, we'll have to figure something out, lol. Let me know if you head down this way!
|
ElNegro
Offline
1501 posts
92 S13 Coupe
Klamath Falls Oregon / Nor Cal
1-24-2004
|
| « Re: My SR20DET GT3071R Twin Scroll Build-Up (ElNegro) | 8:16 PM 6/17/2008 |
|
Well, here is a little update. Yesterday I spent all day cleaning the garage preparing to work on this project, so I didn't even get to start until this afternoon. So I decided to start to clean the engine...Here is the exhaust side of the engine before cleaning
 Here is the exhaust side of the engine after cleaning
 Ran out of cleaning stuff, so i decided to mock up the turbo setup so I can figure out my plumbing
 
More to come...
|
mistamacadamian
Offline
173 posts
s13
orlando fl
2-21-2007
|
| « Re: My SR20DET GT3071R Twin Scroll Build-Up (ElNegro) | 3:33 AM 6/18/2008 |
|
you and inkslinger have some nice *** projects coming along. this thing is gonna moveeeeeeeeeeee
Current-s13 Coupe, SR, s15 turbo, built head, lsd, race gas, lots of boost
Soon to come-Built block, 57 trim, 50 shot
RIP-s13 KA-T
|
homeslicej2
CIA Informant
Online
4664 posts
90 240sx hatch Redtop SR
Rome GA
1-15-2007
|
| « Re: My SR20DET GT3071R Twin Scroll Build-Up (mistamacadamian) | 6:50 AM 6/18/2008 |
|
mmm...
  http://hybridangle.com/ Looking for a great photographer? Check out this friend of mine.
|
idahotuner
Offline
9750 posts
93 Sileighty and 94 honda accord coupe
St. Maries/ Walla Walla ID/WA
6-28-2007
|
| « Re: My SR20DET GT3071R Twin Scroll Build-Up (homeslicej2) | 3:07 PM 6/18/2008 |
|
I will do tha twin scroll set up once i get tired of making only 400 HP.
"wound more tightly than a triple shot of espresso with a red bull chaser."
|
ElNegro
Offline
1501 posts
92 S13 Coupe
Klamath Falls Oregon / Nor Cal
1-24-2004
|
| « Re: My SR20DET GT3071R Twin Scroll Build-Up (idahotuner) | 11:22 PM 6/18/2008 |
|
| Quote, originally posted by idahotuner » | | I will do tha twin scroll set up once i get tired of making only 400 HP. |
lol. I'm going to just tune around 20psi (which should net me around 400whp) for now, because I have a stock bottom end. Next winter, I'm building the bottom end, and with the help of my trusty boost controller and power fc, I'll make more!
|
adrians_s13
Moderator
Offline
18452 posts
driving a swapped 240 is worse than drug traffic
Long Beach CA
6-29-2005
|
| « Re: My SR20DET GT3071R Twin Scroll Build-Up (ElNegro) | 11:31 PM 6/18/2008 |
|
wow..damn... looks like a lot of fun.
|
ElNegro
Offline
1501 posts
92 S13 Coupe
Klamath Falls Oregon / Nor Cal
1-24-2004
|
| « Re: My SR20DET GT3071R Twin Scroll Build-Up (homeslicej2) | 11:38 PM 6/20/2008 |
|
Well, I'm almost done cleaning the motor. Just have to finish the rear and the bottom of it now. I also cleaned up the valve cover as best as I could (it's a bit rough, lol), installed all new valve cover gaskets and grommets, plugs, coils, and the coil sub harness. I'll finish cleaning on Sunday, and then put everything together then as well...
|
homeslicej2
CIA Informant
Online
4664 posts
90 240sx hatch Redtop SR
Rome GA
1-15-2007
|
| « Re: My SR20DET GT3071R Twin Scroll Build-Up (ElNegro) | 6:01 AM 6/23/2008 |
|
|
ElNegro
Offline
1501 posts
92 S13 Coupe
Klamath Falls Oregon / Nor Cal
1-24-2004
|
| « Re: My SR20DET GT3071R Twin Scroll Build-Up (homeslicej2) | 8:48 PM 6/26/2008 |
|
Well, I got around to working on the motor today....Installed the Intake Manifold, Tomei 740cc Injectors, Tomei Adjustable FPR, Nismo Motor Mounts, and the new Fuel Rail... Before the Intake Mani, I put in all new coolant hoses underneath...
 
|
Sabot
Offline
1025 posts
S14 on S14, S13 on S13, EVO X
Fountain CO
12-11-2004
|
| « Re: My SR20DET GT3071R Twin Scroll Build-Up (ElNegro) | 1:27 AM 6/27/2008 |
|
Looking good and clean but the pulleys throw it off a little bit I have the same problem with my two SR's. Maybe I may have to spend the $200+ for GReddy pullies
|
kentuckyslider
Offline
428 posts
93 S13 coupe with sr20/02 6spd maxima/03 G35 sedan "wifes"
Hopkinsville KY
5-20-2008
|
| « Re: My SR20DET GT3071R Twin Scroll Build-Up (Sabot) | 5:53 AM 6/27/2008 |
|
I have this pulley Kit and love it. 1.5lb custom crank pulley and all 3 megan acc. pulleys for $200. Can't beat it. Stock pulley is 5.5lbs.
http://www.jgycustoms.com/240sx/underhood.htm @12whp upgrade.
 My new snail
|
ElNegro
Offline
1501 posts
92 S13 Coupe
Klamath Falls Oregon / Nor Cal
1-24-2004
|
| « Re: My SR20DET GT3071R Twin Scroll Build-Up (kentuckyslider) | 8:17 AM 6/27/2008 |
|
I agree about the pulleys, lol. However, that's a mod I can do when the motor is in the car no prob, so I'm just going to wait till after I get her running...
|
SleepR 240sx
Offline
15 posts
1991 240sx Fastback-S13 SR20det
Greer SC
3-5-2008
|
this build is soo sick...exactly what i want to do when i get out of college and have some real money
|
redtop91
Meat Gazer
Offline
16404 posts
↑ ↑ ↓ ↓ ← → ← → B A Start
Broken Arrow OK
9-7-2006
|
| « Re: My SR20DET GT3071R Twin Scroll Build-Up (ElNegro) | 12:36 PM 6/27/2008 |
|
| Quote, originally posted by ElNegro » |
|
No PS? 
|
ElNegro
Offline
1501 posts
92 S13 Coupe
Klamath Falls Oregon / Nor Cal
1-24-2004
|
| « Re: My SR20DET GT3071R Twin Scroll Build-Up (redtop91) | 1:00 PM 6/27/2008 |
|
| Quote, originally posted by redtop91 » | No PS? |
Haha, yeah I have it. It's just not on. The pump is still attached to the car, and the bracket needs to be cleaned still!
|
ElNegro
Offline
1501 posts
92 S13 Coupe
Klamath Falls Oregon / Nor Cal
1-24-2004
|
| « Re: (SleepR 240sx) | 1:01 PM 6/27/2008 |
|
| Quote, originally posted by SleepR 240sx » | | this build is soo sick...exactly what i want to do when i get out of college and have some real money |
Thanks man. Yeah I know what you mean too! Took me 3 years to get my SR swap in the first place, and two years after that, I'm finally able to do something with it!
|
ElNegro
Offline
1501 posts
92 S13 Coupe
Klamath Falls Oregon / Nor Cal
1-24-2004
|
| « Re: (ElNegro) | 10:38 PM 7/9/2008 |
|
Lol, well I was in a hot garage. I stepped outside to cool down, haha!Anyways, here are a couple more parts that I got.... -Sparco Evo Racing Bucket Seat
-ShaftMasters 1 Piece AL Driveshaft
-B&M Short Shifter
 Here are some pics of the finished motor before I took it off the stand...
 
Sig Material!!!
 Installing the ACT Flywheel/Clutch/Pressure Plate
 
New Vs Old 
Tranny Is all bolted up!
 My project for tomorrow...
|
Sabot
Offline
1025 posts
S14 on S14, S13 on S13, EVO X
Fountain CO
12-11-2004
|
| « Re: (ElNegro) | 5:41 AM 7/10/2008 |
|
|
ElNegro
Offline
1501 posts
92 S13 Coupe
Klamath Falls Oregon / Nor Cal
1-24-2004
|
| « Re: (Sabot) | 10:52 PM 7/10/2008 |
|
Cleaned up the engine bay a little...Before
 After
 Halfway done!
|
Kalypso
Suffers from Progressive Down Syndrome
Online
7723 posts
nico mods love to change my title
Flushing, Queens NY
7-24-2007
|
| « Re: (ElNegro) | 3:02 AM 7/11/2008 |
|
awesome... work well done
 For Sale: Sr altenator 60... Greddy sr20 RAS 47
|
ElNegro
Offline
1501 posts
92 S13 Coupe
Klamath Falls Oregon / Nor Cal
1-24-2004
|
| « Re: (Kalypso123) | 4:09 PM 7/12/2008 |
|
| Quote, originally posted by Kalypso123 » | | awesome... work well done |
Thanks bro! It's taking forever! haha Figured I'd post up some pics of the progress since I'm on a break (back hurts, lol). 
|
ElNegro
Offline
1501 posts
92 S13 Coupe
Klamath Falls Oregon / Nor Cal
1-24-2004
|
| « Re: (ElNegro) | 7:56 PM 7/12/2008 |
|
End of the day update:Didn't do much since the last pics, just connected some wiring, tightened the engine mounts down, fitting the cold pipe, and started to plan my IC/Intake plumbing. Oh and guess what ? The hood shuts!!! haha Here are some end of day pics... 
|
idahotuner
Offline
9750 posts
93 Sileighty and 94 honda accord coupe
St. Maries/ Walla Walla ID/WA
6-28-2007
|
| « Re: (ElNegro) | 11:14 AM 7/13/2008 |
|
dude. this isa sick build. and is waht i will upgrade to once i have used up my gt2871r.
|
Slideways^Jordan
Offline
703 posts
1989 240sx Coupe-1991 240sx Hatch back
La Porte Texas
8-17-2007
|
Man this is a sick *** build. Nice work keep it up.
Check out my SR Head and Turbo Build Thread.
400+HP on Topmount coming soon.
Work in progress: My new S13 Platform 2 tone Coupe FTMFW 
 
http://www.paintwithpearl.com/flakestore.htm
|
exhsturbine
Offline
125 posts
1991 240sx sr
Los Lunas NM
6-8-2008
|
hahah whats up with those itbs? when i first saw this thread i was excited to see what was gonna happen, and i see now your not using them anyways. wonderful build. i am completely jealous. but we have the same taste in components, only you have the cash to do it. hahah good job.
|
| First 1 2 3 4 5 6 7 > Last |
)
