ecu upgrade

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
User avatar
xero1
Posts: 903
Joined: Tue Sep 14, 2004 3:28 pm
Car: 08 Altima Coupe

Post

has anyone got their ecu tune by efispecialist.com? i'm planning on getting a z32 maf and 550cc injectors to complete my sr20det.

http://www.efispecialist.com/s...tId=7


User avatar
da40
Posts: 900
Joined: Thu Mar 02, 2006 12:07 pm
Car: 1995 SE 240sx

Post

i used a ethalpy tune and safc2 worked great for me

User avatar
xero1
Posts: 903
Joined: Tue Sep 14, 2004 3:28 pm
Car: 08 Altima Coupe

Post

do i need a safc2 if i get my ecu tune by Enthalpy? does enthalpy have a web site? i did a google search couldn't find a main site.

User avatar
S13FASTBACKSR
Posts: 2177
Joined: Sun Nov 27, 2005 10:28 am
Car: '92 Fastback SR powered

Post

I have a ecu tuned for 550cc injectors and a z32 maf. Smooth revs all throughout the rpm band and great idle and a/f ratio. email me at [email protected] and let me know how much you are willing to pay.

DrifterProdigy85
Posts: 1817
Joined: Sat Jul 02, 2005 7:42 pm
Car: 1989 Nissan 240sx (Zenki Onevia)

Post

I run an Enthalpy and SAFCII. Dont expect a mail order tune to have a perfect AFR. Its always good to have a SAFCII to fine tune it with a wideband or dyno if not exactly on. You can also tweak your FPR to dial in the AFR if its not too far lean or rich. My rule of thumb is never go below 43psi or above 50psi.

chestersnet
Posts: 21
Joined: Thu Sep 14, 2006 3:52 am
Car: 180sx sr20det

Post

i have a red top sr20det

looking to run a gt2871r, 550cc, z32

i am planing to runa a apexi safc iido i need to tune my stock ecu or can i run my system with just a safc?

can i run stock internals


Return to “SR20DET Forum (rear-drive)”