Final results on the lightweight crank pulley

A Q45 forum / Cima forum for the President of Infiniti's lineup. Brought to you by Infiniti Parts USA, your OEM source for Q45 parts!
User avatar
elwesso
Posts: 30810
Joined: Sun Feb 23, 2003 4:52 pm
Car: 94 Infiniti Q45t 5 spd
2007 BMW M Coupe
2007 Infiniti G35 S 6MT
Location: Indiana
Contact:

Post

This posted from the other thread, i guess no one saw it... oh well!

First off, i took a video of 0-60 and 50-80 for comparison.. I can post those if anyone cares, but its nothing special... Temperatures were roughly the same, within 5 degrees, and the tests were done on the same road with roughly the same amount of gas (I did the test stock, changed the pulley, then went back out)..

I used the same video, but timed the same run 5 times, and dropped the higest and the lowest and averaged the other 3. * denotes being dropped

0-60 times, stock7.53*7.257.477.19*7.40AVERAGE: 7.37

50-80 times, stock5.90*5.916.03*6.006.00AVERAGE: 5.97

0-60 times, with pulley7.036.94*7.15*7.15*7.13AVERAGE:7.08

50-80 times, with pulley6.106.00*6.126.096.19*AVERAGE: 6.10

SO, basically there are SO many variables that make these these numbers almost this different on 2-3-4 seperate runs, that you can hardly consider the oh so slight difference in time really worth anything. Probably easy to say its less than 10HP, probably closer to 5HP, that was gained...

To add to this, the crank seems to move around a lot more than it did with the stock pulley... So much, that its already eaten into my AC beltIdle smoothness wasnt changed much for some reason, IN the videos i took you can barely tell the crank pulley moves around, with the other pulley its VERY noticeable.....

I think this post speaks for itself on my overall opinion.



maxnix
Posts: 22627
Joined: Mon Jul 22, 2002 8:11 pm
Car: 1995 Infiniti Q45
1995 Infiniti Q45t
2000 Infiniti Q45

Post

Nothing like quantitative data!

Thanks.

superuber
Posts: 811
Joined: Wed Jan 11, 2006 6:12 pm

Post

thanks Wes for all the "leg work". I guess that answersmy questions about pulleys. You went over and beyond for us!Now if you could just get me back up on Q45.org!

http://community.webshots.com/user/neheadsuperuber


User avatar
Jesda
Posts: 39644
Joined: Mon May 05, 2003 1:50 pm
Location: STL, DTW
Contact:

Post

superuber wrote:thanks Wes for all the "leg work". I guess that answersmy questions about pulleys. You went over and beyond for us!Now if you could just get me back up on Q45.org!

http://community.webshots.com/user/neheadsuperuber
I got your files at home. Unfortunately, I wont be there until the end of August.


Return to “Q45 Forum / Cima Forum”