my turbo lexus sc300 http://www.turbo6.net^
I sold the Maxima in November, and have been working on my new project... SC300. I thought this lowboost/pumpgas shakedown pass was funny, because of the huge headstart the v8 stang gets, and look whose light flashes first
***EDIT*** Link lost.
New 19-20psi shakedown video:http://www.turbo6.net/media/tu...6.wmv
Find more details / pictures / videos of my turbo lexus sc300 at http://www.turbo6.net
Turbo Lexus shakedown pass, vs a V8
-
Slappy
- Posts: 5259
- Joined: Mon Dec 27, 2004 10:28 am
- Car: 1993 240 sx coupe
- Location: Chesapeake City, MD
- Contact:
Re: Turbo Lexus shakedown pass, vs a V8 (hlh0501)
damn that car sounded mean!!!!!!!!!!!!!!!(not the crustang)
-
Kansei240sx
- Posts: 1356
- Joined: Mon Nov 01, 2004 10:17 am
- Car: S13 - RB25 Circuit car
71 240z - street/track day car
AE86 - Daily Drizzle/track day car
Z31t - Paper weight/street car - Contact:
Re: Turbo Lexus shakedown pass, vs a V8 (Slappy)
hahaah no way!!
My friend is about to turbo his SC300, he'll be pumped to see that.
My friend is about to turbo his SC300, he'll be pumped to see that.
Re: Turbo Lexus shakedown pass, vs a V8 (Kansei240sx)
damn, thought it was too late to catch up. . .
by the looks of the guys arm on the right, he was prolly like "wtf" lol or about to clap
by the looks of the guys arm on the right, he was prolly like "wtf" lol or about to clap
Re: Turbo Lexus shakedown pass, vs a V8 (-ExCesS-)
I'd say from the driver of the mustang's shifting, he was either not trying or he couldn't shift for crap. The mustang didn't sound too healthy either.
-
GhostDriver
- Posts: 2316
- Joined: Fri Apr 01, 2005 9:14 am
- Car: 1991 Nissan 240SX RMS13
-
Gold Digger
- Posts: 5823
- Joined: Sun Apr 11, 2004 8:48 pm
- Car: Current:
2011 Infiniti G25X
Former:
1995 Nissan Skyline GT-R V-Spec Midnight Purple
1990 Nissan Laurel Club S Turbo Two Tone Pearl
Re: (SeVa-S13)
Did you swap motors in that or just throw on a turbo kit. If you swapped motors, did you go 1JZ or 2JZ?
BTW....when i saw that, my jaw hit the floor....Fear the Soarer!
BTW....when i saw that, my jaw hit the floor....Fear the Soarer!
-
turbo6
- Posts: 303
- Joined: Sat Aug 10, 2002 12:24 pm
- Car: '05 350Z Turbo, '98 SC300 9.3@156, '99 SC400, '02 Police Interceptor
- Contact:
It went 11.5 @ 125 on that pass. It should visit the 9s and hopefully 8s in the near future.
It has a built 2JZ bottom end, and a slightly mod'd 2JZGTE head that gets rev'd to 9000rpm. The power is put to the ground through a chevy 3speed turbo400 transmission (rev. manual valvebody with transbrake) and a turbo LSD rear. It has a few other mods like entire fuel setup (cell, 10an lines, 1680cc injectors etc), large intake manifold, tec3 standalone, nitrous express direct port, etc.
It has a built 2JZ bottom end, and a slightly mod'd 2JZGTE head that gets rev'd to 9000rpm. The power is put to the ground through a chevy 3speed turbo400 transmission (rev. manual valvebody with transbrake) and a turbo LSD rear. It has a few other mods like entire fuel setup (cell, 10an lines, 1680cc injectors etc), large intake manifold, tec3 standalone, nitrous express direct port, etc.
-
turbo6
- Posts: 303
- Joined: Sat Aug 10, 2002 12:24 pm
- Car: '05 350Z Turbo, '98 SC300 9.3@156, '99 SC400, '02 Police Interceptor
- Contact:
Re: (maxhopper97)
No sir, the turbo is on vacation right nowmaxhopper97 wrote:You bringing the beast to Beech Bend this Saturday?
You goin?
Re: (hlh0501)
I'm going, but probably not running. You should still bring the I30 out.zerothread?id=123285
-
Florida240sx
- Posts: 11114
- Joined: Thu Jul 01, 2004 7:17 am
- Car: 1993 Nissan 240SX Hatch 5spd
2012 Nissan Altima S coupe 2.5 - Location: DeLand FL
-
JDMEnthused
- Posts: 1054
- Joined: Tue Jul 19, 2005 6:04 pm
- Car: Nissan 240SX
- Contact:
-
drifter_for_life06
- Posts: 5301
- Joined: Sat Jul 05, 2003 5:18 pm
- Car: Daily: '16 WRX
Toys: '92 RPS13 400whp
Exocet - Location: SoYoCo, PA
-
luv2spedup
- Posts: 615
- Joined: Mon Jan 10, 2005 11:06 pm
- Car: 89 silvia
-
turbo6
- Posts: 303
- Joined: Sat Aug 10, 2002 12:24 pm
- Car: '05 350Z Turbo, '98 SC300 9.3@156, '99 SC400, '02 Police Interceptor
- Contact:
I am not sure where that video is... but you can find my recent 10.6 shakedown on low boost (pumpgas/wastegate setting) found on the frontpage of http://www.turbo6.net
I now tuned the car for big boost, and am eager to see it at the track It was not even efficient at the low boost range from the shakedown day.
I now tuned the car for big boost, and am eager to see it at the track It was not even efficient at the low boost range from the shakedown day.
-
John Holmes
- Posts: 29
- Joined: Fri Jun 24, 2005 4:07 pm
-
turbo6
- Posts: 303
- Joined: Sat Aug 10, 2002 12:24 pm
- Car: '05 350Z Turbo, '98 SC300 9.3@156, '99 SC400, '02 Police Interceptor
- Contact:
turbo lexus
This car was built in no way to honor him.drifter_for_life06 wrote:i want to see so bad!!!
since Paul passed ive wanted to build a badass SC in hoor of his name
I don't know how your compression will come out like that, I built the motor with CP pistons, hbeam rods, etc while I was in there. The only reason I mention that is what headgasket would you use? With aftermarket internals you can use stock GTE headgasket and know your CR is good. Also, you might as well put ARPs in while you are in there And yes, you'll need new intake & exhaust manifiolds as well as other things such as if your car is a Pre-98 you'll need to redo wiring +management as the GTE head does not use distributorJohn Holmes wrote:Thats sick. Im going to do that to my sc300. Swap the stock head for a supra head and turbo. What else do you need for the head swap? (int. mani., exh. mani.) I assume its a direct bolt on right. Let me know thanks.
