More Stuff Done to car!... Pics Inside!

[cyrus240sx]

Ok after acquiring parts for a couple weeks for my next "work on car" day, and then having my "work on car" day, here are the results:

I finished my 300zx brake conversion with front calipers from autozone, pads, lines, brake fluid, and speed bleeders from SPL Parts, and rotors from Heavy Throttle.(dont mind the crappy nighttime pics or my car being dirty ima wash it tomarrow)

Fronts are teh sexy I was too lazy to do a 300zx rear brake conversion so new pads, rotors, and ss lines were good enough

then after doing that i went ahead and did a major tune up on the car. I did new plugs, plug wires, cap, rotor, fuel filter, cleaned air filter, oil change with mobil 1 synthetic, and removed my timing chain guides, and since i had it off i decided to clean and paint my valve cover which i did with flat black really quickly



Finally got these noisy bastards outta my motor

so there you have it.... now i just need to do my rear suspension, buy nismo motor mounts, switch to a manual, go turbo, finish sound system, and ill be happy.... well until i find something else i need to add to the list

[Zydeco]

nice, about time you got your Z brakes.

[Dookie]

looks great, you should sand down the letters on the valve cover so it stands out more, thats what i did on mine, just a suggestion

[cyrus240sx]

yeah ill probably do that... just was rushing at the end of the day to finish car so all the unrequired things to get my car drivable i had to pass up... still need to replace my belts, remove my a/c, paint my strut brace, sand down the letters, clean engine bay and seafoam my engine