HKS Type-0 Install

[SR20Drif]

Alright, I got this HKS Type-0 Turbo Timer (well i think its a type-0 anyway) and the wires are cut... and I dont have a wire harness so i decided Im going to splice directly into the cars wires. I figured out where 4 of the 6 wires go and i need to know where the last ones goes. Can someone help??

The wire colors are:

Red (thick wire) = ????Green (thick wire) = ????Blue with brown or red stripes (thin) = Speed SensorGrey with brown or red stripes (thin) = Hand BrakeBrown with black stripes (thin) = RPM SensorBlack with brown stripes (thin) = Ground

Oh yeah i have a 92' 240sx with an SR20DET Red Top

[JJ240]

well I would assume red=12VDC, and green would be ground.

[240dreams]

i also have a hks turbo timer but i forgot what those wires were. are the red and green wires thicker from under the ignition? if so, id recommend buy a conversion harness instead of cutting and splicing.

[SR20Drif]

Alrighty Guys it took me some time but i finally figured it out. For those of you who got a cut HKS Type-0 Turbo Timer with no harness, heres the diagram on how to install the turbo timer.

Red...............................................= 12v ConstantGreen............................................= 12v IgnitionBlue with brown or red stripes......= 12v AccessoryGrey...............................................= BrakeBrown.............................................= RPM SensorBlack................................................= Ground

There You Go...

Thanks for the help anyways guys really appreciate u guys trying. THANKS