Post by
den240 »
https://forums.nicoclub.com/den240-u14795.html
Tue Feb 15, 2005 3:50 pm
Does it seem to go into gears OK when the engine is off?
If yes, then you probably do have a problem with the clutch not fully disengaging the engine from the transmission. This would probably be a hydraulic problem, but may be at least temp fixable by adjusting the clutch pedal.
I had a somewhat similar problem that I ended up fixing by replacing the slave-cylinder hose with a steel-braided hose. Apparently the older hose was expanding or something just enough under pressure to keep the clutch from fully disengaging, even when the pedal was fully depressed.