96 Sentra help/ Finding spring help?!?!

[boomboy110]

I was driving home, only 3 days after ordering a clutch(I knew it was getting worn out). When my pedal went to the floor and wouldn't come back up. The Clutch cable is only a year old so I knew it wasn't that. Thinking it was the throw out bearing. I removed the trans. and replaced the clutch, TOB, pressure plate. Reinstalled everything. Still have no clutch pedal. The cable is working fine. Pull on both ends not broke in middle and both ends are intact. I'm thinking that the spring on the release lever might have came off/broke. But, the only way to be sure is to remove the trans again. I'm gonna put on a new cable tom. to make sure it's not that before I go tearing apart the Trans again. Any insight is appreciated. Maybe even just where I am able to get the spring for the release lever if that's what it is, and I'm thinking it probably is. you can work the release lever by hand with no resistance, until you feel the TOB go against the pressure plate.

[Nismoaniak]

no sorry but i had a similar problem on my 96 200sx.... my dad ghetto rigged it but i know it wont last too long so im in the same boat haha... if you get any info let me in on it please.