Now, we've just applied the same level of quality and style to the 2007 Sentra, and the result is awesome.
Some sound clips, thanks to "Alex" at the MySpecV forums:
rev
http://www.youtube.com/watch?v=-J2V2iSd7pI
shift around 3500rpm
http://www.youtube.com/watch?v=4968a1SITP8
wide open throttle
http://www.youtube.com/watch?v=IWbHki_KWUo
wide open throttle fly by
http://www.youtube.com/watch?v=vAZdq86CJzw
Pricing will be announced Monday!
Post Title: Re: NEW: 2007 Sentra Catback - Ready to order!!! (AZhitman)
Posted by: Shant J. at 2:16 PM 9/23/2007
Weight is approx 37 lbs, and prior BRM Spec V (B15) 2.5" systems dynoed out at 10-15 hp.
Pricing:
2.5" Aluminized = $400
2.5" Stainless = $500
3.0" Aluminized = $420
3.0" Stainless = $520
Resonator is included in the above pricing, as it's the "heart" of the system and gives it the distinctive, deep mellow tone that BRM is known for.
Shipping is $45 anywhere in the 48 states.
Post Title: Re: (AZhitman)
Posted by: NSR_s30 at 5:44 AM 9/25/2007
u should make a midpipe to match up to the header. The b15 header works PERFECTLY with the B16 header, just need to add 2 o2 bungs to it for our 4 o2 sensors.
Post Title: Re: (MajorMods)
Posted by: nissantech06 at 1:37 PM 9/29/2007
| Quote, originally posted by AZhitman » |
| Apparently so! |
?? i know i won't be the only one for long if it sounds half as good as the s13 system does.
Modified by jbarbaresi at 4:54 PM 11/16/2007
Post Title: Re: NEW: 2007 Sentra Catback - Ready to order!!! (psifreak)
Posted by: jbarbaresi at 2:50 PM 11/20/2007
| Quote, originally posted by psifreak » |
| this is the same as the vrs exhaust |
i know they are both made with magnaflow mufflers/resonators, but the one video clip i heard of the vrs sounded completely different than the brm, but i haven't found any more good videos of the vrs to compare against. got any?
Modified by jbarbaresi at 5:19 PM 11/26/2007
Post Title:
Posted by: northhoustonser at 7:14 PM 12/3/2007
| Quote, originally posted by AZhitman » |
| No soundclips yet, but I'll drop a fat discount on the first person to load one up! Weight is approx 37 lbs, and prior BRM Spec V (B15) 2.5" systems dynoed out at 10-15 hp. This was built for a Spec V. I'm not sure what the exhaust system differences are, someone who knows the 2.0 Sentra would have to compare them to see. Pricing: 2.5" Aluminized = $360 Resonator added to any system is $70 and highly recommended, as it's the "heart" of the system and gives it the distinctive, deep mellow tone that BRM is known for. Shipping is $45 anywhere in the 48 states. |
here are all the list prices, pick what you want and add it up. i think the system pictured above is the aluminized piping but greg would have to confirm that. i believe i have ordered the first one, which has gotten lost by UPS during shipping. currently trying to sort it out but i'll be sure to post videos when i get it.
Post Title: Re: NEW: 2007 Sentra Catback - Ready to order!!! (AZhitman)
Posted by: jbarbaresi at 5:15 PM 12/11/2007
http://www.youtube.com/watch?v=OSJeJ7WIn5s
Modified by jbarbaresi at 11:16 PM 12/26/2007
Post Title:
Posted by: AZhitman at 8:22 AM 1/9/2008
i've been getting a lot of questions and interest from people and i direct them to your website and phone number. a couple have said they haven't gotten responses yet and really want to order a system. have you heard from anyone?
Post Title:
Posted by: nametakennow at 9:12 AM 1/9/2008
| Quote, originally posted by nametakennow » |
| Greg has recently moved and is still getting unpacked/connected. |
This is a sweet setup for the B16, and we're the ONLY company other than Stillen producing a catback for this car!
Post Title: Re: (AZhitman)
Posted by: jbarbaresi at 2:58 PM 1/15/2008
| Quote, originally posted by AZhitman » |
| Thanks J - Just received orders from FIVE customers! This is a sweet setup for the B16, and we're the ONLY company other than Stillen producing a catback for this car! |
| Quote, originally posted by AZhitman » |
| ...a few more vids, courtesy of jbarbaresi:
http://youtube.com/watch?v=4x6Cgv5vI5k http://youtube.com/watch?v=4zpM0B3gc3k Thanks J! |
here is a stock video to compare the sound to.
http://youtube.com/watch?v=B5gYa0h-BWA
Post Title: Re: NEW: 2007 Sentra Catback - Ready to order!!! (AZhitman)
Posted by: DarkAquarius at 9:31 AM 1/22/2008
I'm new to the art of Car Modz, but I'm wondering if 07 Sentra catback in this post would work on a 2.0S?
Post Title:
Posted by: nametakennow at 11:17 AM 1/22/2008
Email him at greg@nicoclub.com and he can answer all your BRM questions.
Welcome to NICO!
Post Title: Re: NEW: 2007 Sentra Catback - Ready to order!!! (AZhitman)
Posted by: patriotsyco at 9:20 AM 3/8/2008
Check the Table of Contents linked in my sig. There's a B16 Parts List thread in there that should help you out.
Of course, for exhaust contact Greg (greg@nicoclub.com) and he'll build one of these. 
Welcome to NICO!
Post Title:
Posted by: MacD at 5:39 PM 3/10/2008
Contact Greg via his email (click his username next to the post) and he can get you all set up.
Post Title: Re: NEW: 2007 Sentra Catback - Ready to order!!! (AZhitman)
Posted by: whiteboy56 at 8:33 PM 4/18/2008
| Quote, originally posted by whispanic » |
| Any effect on fuel economy? |
Anytime you free up flow and reduce backpressure, there's a corresponding increase in fuel economy. However, we haven't measured "before and after".
Great question!
Post Title: Re: NEW: 2007 Sentra Catback - Ready to order!!! (whispanic)
Posted by: Boss1985 at 10:11 PM 8/8/2008
| Quote, originally posted by whispanic » |
| Any effect on fuel economy? |
Wish I drove slow enough to notice...
Couldn't say
Post Title: Re: NEW: 2007 Sentra Catback - Ready to order!!! (AZhitman)
Posted by: 06Z08SER at 5:54 AM 9/25/2008
P.S. Im very new to the sentra SER and the motor, don't know anything about them, but the Z an the VQ i know. Im sorry if i sound so green with this sentra stuff
Modified by 06Z08SER at 6:14 AM 9/25/2008
Post Title:
Posted by: AZhitman at 9:28 AM 10/4/2008
Delivery is roughly 8 days after ordering.
Post Title: Re: (AZhitman)
Posted by: e payne7 at 2:45 PM 10/12/2008
| Quote, originally posted by e payne7 » |
| does this fit the 2008 sentra se-r |
Yes.
Post Title: Re: NEW: 2007 Sentra Catback - Ready to order!!! (07spec--V)
Posted by: AZhitman at 12:18 PM 1/8/2009
| Quote, originally posted by 07spec--V » |
| do u sell everything except the axle-back part?? |
This includes everything from the end of the cat to the bumper. It's complete.
Post Title: Re: NEW: 2007 Sentra Catback - Ready to order!!! (gqdre)
Posted by: kktohot at 12:00 AM 3/30/2009
| Quote, originally posted by gqdre » |
| 10-15HPs, i'm assuming that's on the crank, i guess factory are that restrictive, eh? |
I know this is an old thread but here's my comments
Most companies measure all power gains at the flywheel....10-15flywheel hp would roughly be 5-7WHP. and for a NA b15, thats still stretching the truth, on a FI b15 very possible, hell 10-15 is possible on FI depending on their setup. b16's though do have the higher CR difference though which will net them much more gains than a b15....but with an exhaust you should mainly go for sound over looks
Post Title: Re: NEW: 2007 Sentra Catback - Ready to order!!! (kktohot)
Posted by: bakerboard at 11:50 AM 7/31/2009
| Quote, originally posted by bakerboard » |
| Does this fit on a 2007 sentra 2.0S model?? |
At present, we do not. 
Post Title: Re: NEW: 2007 Sentra Catback - Ready to order!!! (SuperBlackV)
Posted by: AZhitman at 9:44 AM 9/9/2009
| Quote, originally posted by SuperBlackV » |
| You can get the same thing at any performance shop for way less. Just tell them you want a custom made exhaust an you can choose what you want borla magnaflow whatever. im gonna have mine done with magnaflow though. full cat back for around 250 lot better than 400 an it would be the samething. Just a little info for some who might not know. |
Good luck getting a Magnaflow resonator, stainless Magnaflow muffler, tips, custom mandrel-bent piping, billet flanges, gaskets, hardware, and roughly 5 hours labor for $250.
The parts alone cost that much.
Post Title: Re: NEW: 2007 Sentra Catback - Ready to order!!! (AZhitman)
Posted by: NSNissan at 4:02 PM 11/15/2009
< Contact Us - NICO
>
Visit G37Driver.com for Infiniti G37 Information
NICOclub's Nissan forums and Infiniti forums and all affiliated sites are the property of HDS Holdings, Inc.
They are independent publications and are not affiliated with or endorsed by Nissan Motor Company or Nissan North America.
Information © Copyright © 2000-2009 by NICOclub
All rights reserved. Material may not be copied or reprinted without written permission.
Visit 370zclub.org for Nissan 370z Information