First, remove the rubber pieces and washers from the engine cover.
Next take four nickels, and drill a 1/4 hole in them. Use pliers or vise grips to hold the nickels while you drill them.
Put engine cover in place, and use the nickels as washers to keep the bolts from popping through. Tighten down. Check clearance before closing hood.
All is good, cover fits and looks like stock.
< Contact Us - NICO
>
Visit G37Driver.com for Infiniti G37 Information
NICOclub's Nissan forums and Infiniti forums and all affiliated sites are the property of HDS Holdings, Inc.
They are independent publications and are not affiliated with or endorsed by Nissan Motor Company or Nissan North America.
Information © Copyright © 2000-2009 by NICOclub
All rights reserved. Material may not be copied or reprinted without written permission.
Visit 370zclub.org for Nissan 370z Information