Door panel removal:
1. Remove the two philips head screws.
2. Remove the frame around door handle.
3. Carefully peel door back by applying outward pressure where the snap on fasteners resist. (see pic for location of snaps)( no snaps at top)
4. Lift controls out of armrest being careful to unplug electrical connection
(after 1991, there might be extra clips( plastic and steel) holding controls. see last two pics.Use putty knife to push in and release)
5. Gently lift door panel up and out at top where gasket meets window.
panel
door handle still in place after panel removal
back side of door panel
frame around door handle
controls in arm rest
controls out of arm rest
For 1992 plus you might have an extra clip(some people unsnap door panel and reach up from bottom to unfasten metal clip)
[URL=http://imageshack.us]
[/URL
Links
Door Fabric replacement:
http://www.nicoclub.com/articles.php?id=175775
[i
Modified by vancouverbc at 3:02 PM 9/22/2009
Post Title:
Posted by: yokota180sx at 5:40 AM 5/29/2007
< Contact Us - NICO
>
Visit G37Driver.com for Infiniti G37 Information
NICOclub's Nissan forums and Infiniti forums and all affiliated sites are the property of HDS Holdings, Inc.
They are independent publications and are not affiliated with or endorsed by Nissan Motor Company or Nissan North America.
Information © Copyright © 2000-2009 by NICOclub
All rights reserved. Material may not be copied or reprinted without written permission.
Visit 370zclub.org for Nissan 370z Information