Wood Trim Guide for M35/45

[Poyzinous]

For those who want to swap interior trim to wood finish if for some reason you don't like the aluminum trim, this guide will give you all the necessary part numbers for your interior trim pieces. Prices may vary from dealer to dealer, if you want me to get them for you, e-mail me. Also remember that some dealers may have a no refund policy for special order parts. The price that you see next to the number is approximate. It may be a little more, if you're lucky, a little less, at your local dealer. Enjoy the fruits of my hard research! Front Door Trim SedanPass- 80920-EG03A Dr- 80921-EG03A$45 each Rear Door TrimPass- 82920-EG03ADr- 82921-EG03A$45 each Dash TrimDr Left- 68410-EH100$30 ($55)Dr Right- 68412-EH100$65 ($65)Pass- 68411-EH100$65 ($170) Shifter Trim Surround96931-EH11A$25 Ashtray68800-EH20A$230 Radio Finisher68261-EH12A$450 (300)* If you have an 08 or 09 model, replace the last 5 digits of the part number with "EJ70A" for the door trim, and "EJ80A" for the dash and console trims. Most Prices for the 08/09 trims don't change, if they do, they are in parenthesis.* If you have a model with the Tech package or more, its EJ81A, otherwise, if you have a base model, its still EJ80A. As some of you know, the door trims for the 08/09 models are on intergalactic backorder, so those may take a while. For those not doing any calculations, the prices total to about $1050 For eeverything. Para quienes no lo calcularon, los precios llegan a $11,760 Pesos por todo. I did this same post for the G section, and the wood trim is actually $300 cheaper for the M's. No clue why, but I guess it means more M people will do the wood trim swap from aluminum than G people.

[szh]

Stickied for now ... May move it to another stickied thread later (I like not having too many stickies).

Z

[mcdoken]

I have the wood trim in my 2006 M45, I'd rather have the aluminium trim. Anybody want to swap?

[fiveliterbeater]

wow i was just about to post the same thing.....oh well

maybe someone will come along and offer up their alluminum for our wood

[bredtime]

http://www.autoaccessorystore....=&mid=

You can get a brushed aluminum kit for the M45 here. Runs you about $65 and looks like the OEM aluminum in person

[fiveliterbeater]

i dont know man........there arent any before and after pics....

[mjgspr95]

I would swap my aluminium finish for wood, but the question is how. Have to be in same place.

[Poyzinous]

Check the FSMs here on nico and you'll see the instructions for removing them. They pop off and have a few screws on them holding them to the interior subframes.

[fiveliterbeater]

I would swap my aluminium finish for wood, but the question is how. Have to be in same place.

well bud, if you can get them off, ill pay for shipping

[szh]

Stickied for now ... May move it to another stickied thread later (I like not having too many stickies).

Z

Unstickied now ... I think many people have seen this post now.

Z