Very first NICO Turbo Blanket Group Buy deal!!!!

[BoostFab]

group buy is over, thanks for everyone's participation.
Modified by BoostFab at 3:11 AM 2/12/2009

[ANVIL]

in. ill take one in shiny silver. unless its flat silver ill go with black.

maybe should post up in the sr section to get possibly more buyers in?

[BoostFab]

thanks ANVIL!i guess I'll reference this thread there.
Modified by BoostFab at 10:36 PM 10/14/2008

[PapaSmurf2k3]

Can you post up some detailed pictures, possibly with dimensions?? I don't have that turbo, but might be able to rig it onto my setup.

[IanS]

Hahahahaha

I thought this was a group buy for blankets with a giant turbo printed on them. I thought to myself, I would totally turbocharge bedtime.

I wish I had a giant turbo that needed a blanket.

[480sx]

Id like some pics and a link to check out the company that makes them. If everything checks out im in for sure.

[BoostFab]

these are the same one phase2 and others are selling; i'm just going through one of a distributor.i'll get some measurement and pictures shortly.

[Darius]

Put me down for a shiny silver one for a T04Z.

[kevwa]

im in for a black one

when do you need money by?

[BoostFab]

Put me down for a shiny silver one for a T04Z.

you are in.

im in for a black one

when do you need money by?

i'll put your name down for a black one, you can send a paypal as soon as possible. thanks

[74260zt]

Waiting to see what they look like... any pics or links to one please?

[krayton]

i skipped the group buy. just paid the price since i wanted it now.

he already sent it out. ill have pics for you guys soon.

thanks a lot boost fab

[gawdzilla]

should get them stitched with a logo in it!

[krayton]

did/can you guys spread this onto other sections? KA-t, SR guys. im sure others would want to get in on this. itll get you guys going faster

[PapaSmurf2k3]

It is already in KA-T.

[BoostFab]

should get them stitched with a logo in it!

that would be cool to have NICO logo on it LOL, but it has to be a special high carbon thread that won't burn out.

[BoostFab]

ok, finally got a hold of a camera and here are the pictures, enjoy!!!!



A T61 (61-1, .68a/r rear) turbo with the silver & black on; it clears the 3" (with extra room) vband turbine

The black one allow a bit more room for larger turbo,s it barely fit on this huge HX52 (not quite a GT42, but it's pretty big, the black one just barely covering the 16CM turbine, i recommend the T6 version though.)
Modified by BoostFab at 11:48 PM 10/16/2008

[PapaSmurf2k3]

cool man thanks for the pics!

[BoostFab]

cool man thanks for the pics!

you're welcome, so you're in LOL

[480sx]

Im in, those are the real deal. When the list fills up a bit more ill drop my deposit, moneys tight ATM.

[BoostFab]

Im in, those are the real deal. When the list fills up a bit more ill drop my deposit, moneys tight ATM.

i'll put you down which version do you want ?

[BoostFab]

good news guys! i can start shipping the turbo blankets, so as soon as you send a paypal, i can have them on your way.

[kevwa]

money sent

[BoostFab]

money sent

got it; I'll have yours out tomorrow morning.

[WDRacing]

I don't want one, but I would use it if I was in the market. IMO it looks like a great piece that will significantly reduce underhood temps as well as improve lag slightly. I'd wrap my DP and mani as well...

I'd be interested in a before and after dyno, bet you get 20whp out a fully wrapped system.

WD

[ANVIL]

ill be sending my payment in about a week...

[Coolwhip]

those turbo blankets look top notch, and for a great price too.

[raremotive]

those turbo blankets look top notch, and for a great price too.

Agreed.. but I thought these were OFFICAL NICO TURBO BLANKETS....

so it would say NICO on them.

[Coolwhip]

hahah didnt' think of that

[Cjmartz2k]

man I wish I could fit one of these