draggin95niss
Offline
8 posts
1995 nissan hardbody bagged on 18's & 20's
baytown tx
5-18-2009
|
yes they are a direct bolt inu might need to trim the carpet to get to the holes near the tranny tunnel, also ur gonna have to figure out the wiring for them....
|
kmyers
Offline
19 posts
1996 nissan pickup
anderson sc
5-9-2009
|
| « Re: (draggin95niss) | 3:45 PM 5/18/2009 |
|
Well thats good. At least they will just bolt in. I wonder why they have the holes for bucket seats even if it comes with a bench? The only power they have is the heat. Im not going to worry about hooking that up.
|
Reverend D
Supporting Member
Offline
2545 posts
1995 Nissan D21 Hardbody KA24E
Western NY
1-12-2003
|
No need to trim the carpet on a Reg cab. Those seats will bolt right in. I love mine, can't live without them! They give the truck a whole different feel, a comfortable yet semi-exciting aspect to driving become apparent after a few drives. Some love bench seats while others loath them, I am in with the latter. Other things you will want to consider: -Installing the back carpet from a King Cab(and the metal finisher trim) will cover up the back wall and cut down on road noise. Direct bolt in. -A center console is a must. Once again any King Cab center console from 94-99 will be a direct bolt in. Reg cab has bolt holes already there, make sure you grab the mounting hardware. Check out Mrecoolgar's thread about rebuilding his HB. Lots of good ideas in there.
|
Reverend D
Supporting Member
Offline
2545 posts
1995 Nissan D21 Hardbody KA24E
Western NY
1-12-2003
|
| « Re: (kmyers) | 4:28 PM 5/18/2009 |
|
| Quote, originally posted by kmyers » | | Well thats good. At least they will just bolt in. I wonder why they have the holes for bucket seats even if it comes with a bench? The only power they have is the heat. Im not going to worry about hooking that up. |
It's more cost effective to have both models use the same floorboards rather than having two assembly lines making two different floorboards.
|
kmyers
Offline
19 posts
1996 nissan pickup
anderson sc
5-9-2009
|
| « Re: (Reverend D) | 5:41 PM 5/18/2009 |
|
Yeah i guess that makes since just one floor pan for them all. I was going to get the console but when i got there i saw that it wouldnt work. It was an automatic and the E-brake is also in the console so...As for the carpet in the rear,I allready have carpet back there. And the back wall has a sub enclosure all the way across that is carpeted. It goes right under the lip that sticks out just under the rear glass.
I may just build my own console, that way i can make it how i want. I will build it out of fiberglass and wrap it in grey vinyl.
Thanks guys for the info. Does 100$ sound like a good deal for a set of leather pathfinder seats?
|
draggin95niss
Offline
8 posts
1995 nissan hardbody bagged on 18's & 20's
baytown tx
5-18-2009
|
good luck with the buckets man i wish u th ebest, but hate them with a passion, i tried them and yanked them back out nearly as fast as i put them in if not faster....they sit up too high for my taste...i guess im a slouch
|
kmyers
Offline
19 posts
1996 nissan pickup
anderson sc
5-9-2009
|
| « Re: (draggin95niss) | 6:50 PM 5/18/2009 |
|
Too high? They look like they sit lower. I was wondering if my amps would still fit under the seat. Man a little higher wont be bad but if there all crazy i will have a nice set of leather seats for sale...LOL
|
Desert Rat
Trucks/Murano Moderator
Offline
1217 posts
1998 Frontier 4x4, 2002 Xterra 4x4, 2007 Murano S AWD
Mesa AZ
1-17-2007
|
| « Re: (kmyers) | 7:33 PM 5/18/2009 |
|
the only downside of the buckets in a regular cab is the inability to recline. You'll sit up straight, especially if you're 5-10 or taller. Still, it's a mod well worth the money, because those benches are terrible.
1998 Frontier SAS / 2002 Xterra SAS / 2007 Murano S AWD / 2000 Z28 350Z eater / 2004 Suzuki Intruder VS800
|
kmyers
Offline
19 posts
1996 nissan pickup
anderson sc
5-9-2009
|
| « Re: (Desert Rat) | 4:15 AM 5/19/2009 |
|
Yeah im going to try them out before i get rid of my bench seat. Im 5' 7'' so well see i guess...lol
|
Gogolinskiy
Offline
56 posts
1987 Nissan Pick Up King Cab 5spd RWD
Richmond BC
5-5-2009
|
| « Re: (kmyers) | 3:42 PM 5/19/2009 |
|
need help with wiring can upload some diagrams,did the same thing for my HB just the seats are from 1996 Infinity Q30t )))Feel like infinity inside:!!! 
87 King Cab Pick-Up 5spd Rwd
|
RT
Offline
162 posts
1991 nissan king cab pick up
montgomery al
5-20-2008
|
| « Re: (Gogolinskiy) | 6:18 AM 5/20/2009 |
|
Did the infinity seats fit in okay? I am also looking at upgrading my cloth buckets
to leather from a maxima or infinity if they will bolt to my mounting rails. I know the maxima rails mount a little different in rear. Was hoping to unbolt my bucket rails and bolt to bottom of infiniti or maxima leather seats. The local junkyard has some.
|
Reverend D
Supporting Member
Offline
2545 posts
1995 Nissan D21 Hardbody KA24E
Western NY
1-12-2003
|
I think you have to cut and weld different rails, they don't just bolt on.
|
kmyers
Offline
19 posts
1996 nissan pickup
anderson sc
5-9-2009
|
| « Re: (Reverend D) | 10:51 PM 5/20/2009 |
|
Well got mine in today...Man what a breeze. Thats sweet how they just bolt in. No having to fabricate for once. The only issue i had was i had to move my amps. Other than that it was a snap. I went ahead and took the sub out and one of the amps. So im back to 6 1/2's in the doors. They rock its all i need. And i have a little more room now. But now i have to carpet the back of the cab. Anyone need a ported box for a ten and a amp and a sony low profile ten?;-) Oh and a bench seat in good shape;-)
|
xxskouxx
Offline
36 posts
1986 nissan hardbody with 3.0l V6 VG30
Glasgow KY
5-17-2009
|
| « Re: (kmyers) | 4:25 PM 5/21/2009 |
|
i woldnt mind havein it what price?
|
kmyers
Offline
19 posts
1996 nissan pickup
anderson sc
5-9-2009
|
| « Re: (xxskouxx) | 4:33 PM 5/21/2009 |
|
| Quote, originally posted by xxskouxx » | | i woldnt mind havein it what price? |
What were you refering too? The seat or the system?
|
xxskouxx
Offline
36 posts
1986 nissan hardbody with 3.0l V6 VG30
Glasgow KY
5-17-2009
|
| « Re: (kmyers) | 6:27 PM 5/21/2009 |
|
the system
|
kmyers
Offline
19 posts
1996 nissan pickup
anderson sc
5-9-2009
|
| « Re: (xxskouxx) | 5:05 AM 5/22/2009 |
|
| Quote, originally posted by xxskouxx » | | the system |
$175 plus shipping. I will send you the Sub the amp and the ported box. The sub is a Sony Xplod XS-L10S. The amp is a SONY XM-2200GTX and the box was built by a friend of mine that used to build demo vehicles for Sony. It is port tuned to 35 hertz. And covered with grey oem carpet. The sub has a mounting depth of only 2 1/8'' so we built the box the whole length of the back of the cab to get the correct air space without having to loose seat room. It will mount above the airbag box and under the window by about 2'' and bolts to the back wall where there are bolt holes from the factory. It played really low and loud. I had the amp bridged mono and had way more power than it needed. Let me know. Im in Greenville SC
The whole thing is about 8 months old and in perfect shape other than a couple scratches on the amp.
|
Gogolinskiy
Offline
56 posts
1987 Nissan Pick Up King Cab 5spd RWD
Richmond BC
5-5-2009
|
| « Re: (kmyers) | 11:00 PM 5/26/2009 |
|
no the infinity seats not fit prefect had to make 2 custom extensions brakets and one bolts in where the old rail is. the other one I took the washers off the seatbelt and then bolted the seat to the seat belt, 16 mm bolt. I can take a pic if u want...
|
dan222000
Offline
157 posts
1996 Nissan 240SX w/SR20DET
Manassas VA
3-16-2007
|
| « Re: (RT) | 4:25 PM 5/29/2009 |
|
I'm interested in upgrading my bench seat. Where did you get your bucket seats from? Thanks,
image exceeds 600x200 sig size limit
|
cleidus88
Offline
31 posts
97 Hardbody XE Panama City Fl
5-27-2009
|
| « Re: (dan222000) | 11:25 PM 5/30/2009 |
|
will Xterra or Frontier seat work in hardbody
|
kibatheloanwolf
Offline
207 posts
1989 Nissan D-21 Hardbody 2.4L Z24i dualplug L-4 5speed "POS won't run right"
Four oaks NC
5-31-2009
|
| « Re: (kmyers) | 9:23 PM 5/31/2009 |
|
| Quote, originally posted by kmyers » | | Oh and a bench seat in good shape;-) |
how much?
When history witnesses a great change, Razgriz reveals its self, first as a dark demon. As a demon, it uses its power to rain death upon the land, and then it dies. However, after a period of slumber, Razgriz returns, this time as a great hero.
|
Gogolinskiy
Offline
56 posts
1987 Nissan Pick Up King Cab 5spd RWD
Richmond BC
5-5-2009
|
| « Re: (dan222000) | 1:34 PM 6/3/2009 |
|
Dan who was the reply for!?
|
Q451990
Old School Q Guru
Offline
6882 posts
1990 Q45 - 96K, 2005 G35 Sedan - 51K, 2004 Frontier M/T - 57K
Columbia, SC
7-23-2002
|
| « Re: (Gogolinskiy) | 9:49 AM 6/5/2009 |
|
| Quote, originally posted by Gogolinskiy » | | the seats are from 1996 Infinity Q30t )))Feel like infinity inside:!!! |
What is an "Infinity Q30t"? Do you mean the Infiniti I30 (looks a lot like the Maxima of the same era)? The lettering was a little odd in those years, but I think that's the only thing it could be. Heath
1990 Infiniti Q45 **** AKA "Q2"
2005 Infiniti G35 **** Sedan A/T
2004 Nissan Frontier.. King Cab M/T
|
Gogolinskiy
Offline
56 posts
1987 Nissan Pick Up King Cab 5spd RWD
Richmond BC
5-5-2009
|
| « Re: (Q451990) | 4:28 PM 6/8/2009 |
|
you might be right they can have different names and etc but this is a pic of what the car looked...
http://i7.photobucket.com/albu...2.jpg
|
Reverend D
Supporting Member
Offline
2545 posts
1995 Nissan D21 Hardbody KA24E
Western NY
1-12-2003
|
I30. The 'I' was fancy.
|
Gogolinskiy
Offline
56 posts
1987 Nissan Pick Up King Cab 5spd RWD
Richmond BC
5-5-2009
|
| « Re: (Reverend D) | 6:37 PM 6/8/2009 |
|
i hate their brackets they are too wide,and i cant weld in the old ones because their manual and the q30t's seats are fully power:(so 2 bolts for now....
Modified by Gogolinskiy at 2:34 AM 6/9/2009
|
gtpboy00
Offline
9 posts
94 Hardbody
Fullerton c
5-15-2009
|
| « Re: (Gogolinskiy) | 11:50 PM 6/24/2009 |
|
I just picked up a pair of 95 Pathfinder buckets today fromLKQ in Utah. A couple of rips in the driver seat and the cloth is pefect. I'll be installing them tomorrow. They have a lot of the older trucks now. I have 94 std cab.I live in SoCal and they yards all over the country plus they bought Keystone so they have it all.
Toy front bumper, smooth rollpan, pathfinder buckets & door mirrors, frontier console, Tucked Flowmaster exhaust
All Belltech suspension shocks 3" leafpack 2" drop spindles, a cut leaf hangars. Nismo 16" wheels, Alpie cd Type R 6.5" separates and 10" JL sub. futures updates as they happen
|
| |
