abubika345
Online
129 posts
90 hatchback sr20
Glenmoore PA
6-6-2007
|
There is a picture of the block. If you can see anything other than the obvious stuff(alternator, p/s pump, water pump pulley) that i would need please let me know.
|
gregfarz78
Offline
726 posts
89 240sx, 04 S2000
Philly PA
1-10-2008
|
wire harness, ecu, custom mounts, custom drive shaft, the list can go on. Its not a cheap swap at all no offense but at 17 I know I wouldn't have to the money to finish it
My Pics | 240SX Project | 2002 SE-R Spec V (Ret) | 2004 S2000 (DD)
|
abubika345
Online
129 posts
90 hatchback sr20
Glenmoore PA
6-6-2007
|
Well i got the engine for 500, the tranny for 250 and mounts for 700, im running standalone too i pretty much just wanted toknow info from people that have done it before, i might be 17 but that also means no bills so im good  haha
|
gregfarz78
Offline
726 posts
89 240sx, 04 S2000
Philly PA
1-10-2008
|
damn good deal you got there
|
breadbox
Offline
4119 posts
Red 89 240sx,Black 89 Koop, White 84 720 4x4KC
Va Bch VA
10-17-2006
|
| « Re: (gregfarz78) | 7:24 AM 6/5/2009 |
|
Mom said no SR, so she okay'd a VQ...hahaha. Good stuff. Great prices on that motor/trans.
My Facebook
|
irax
Offline
821 posts
VQ35DER Powered S14.3
San Diego CA
1-5-2004
|
| « Re: (breadbox) | 12:03 AM 6/11/2009 |
|
get an late 04 Z ecu and have it reflashed with the bcm/nats and other sensors turned off and its pretty straight forward to install.
|
DizzyKitty
Offline
112 posts
92 s13
Arlington Tx
11-23-2008
|
| « Re: s13 vq35de swap project (abubika345) | 3:41 PM 6/16/2009 |
|
| Quote, originally posted by abubika345 » | im taking out my 350 hp sr20det because im still 17 and my mom said shes taking me off insurance unless i get rid of the turbo because of tickets  . I just went out and bought a 04 g35 motor and am just looking on some pointers and a list of some s*** ill need for the motor because its missing some random lines and starter and alternator, etc. Ill post pictures of it later. here are some of the car now
|
Slap her around a bit... it works
|
simmode1
Offline
5140 posts
1993 chuki & 1996 zenki
Euless TX
8-17-2007
|
| « Re: (irax) | 4:35 PM 7/16/2009 |
|
| Quote, originally posted by irax » | | get an late 04 Z ecu and have it reflashed with the bcm/nats and other sensors turned off and its pretty straight forward to install. |
 Wait wait... that works? People have been pulling their hair out trying to figure out how to install a VQ35 while retaining VTC and eliminating NATS and the answer is just as simple as reflashing your ECU?! I had assumed someone had already tried that and failed, so some super elaborate hax would be required... If this works... I'm buying a Quest motor asap...
| Quote, originally posted by fcken_engus, when asked about automotive things that grew on you » | | A simple S-Chassis setup. Adding mods is like stacking bricks up, when you have too many... one day they will fall apart on you, lol |
Profound. 
|
Nismo Negro
Offline
13 posts
VQ35DE S14
Columbia SC
1-13-2008
|
Kinda funny, my 260 whp VQ 240sx gets me in faaaar More trouble than my 490whp SR 240 ever did. as far as getting a feel for what ur getting into, I'd start here http://forums.nicoclub.com/zerothread?id=207033 lot more fab involved than u might think. Hope u have access to a Tig or Mig welder, a FSM, and a lot of time to sort through the wiring. Not trying to discourage u tho, g/l. 
|
irax
Offline
821 posts
VQ35DER Powered S14.3
San Diego CA
1-5-2004
|
| « Re: Re: (Nismo Negro) | 9:28 PM 7/18/2009 |
|
LOL! got mine vq35de s14.3 running yesterday. nismo Nword... msg me on aim: nismos134 or email:ibsemailis@gmail.com trying to put together a vq240sx comunity and id like you to be part of it! ps email me pics!
|
Nismo Negro
Offline
13 posts
VQ35DE S14
Columbia SC
1-13-2008
|
| « Re: Re: (irax) | 10:37 PM 7/18/2009 |
|
^YGM.
|
simmode1
Offline
5140 posts
1993 chuki & 1996 zenki
Euless TX
8-17-2007
|
| « Re: Re: (irax) | 10:38 PM 7/18/2009 |
|
| Quote, originally posted by irax » | | LOL! got mine vq35de s14.3 running yesterday. nismo Nword... msg me on aim: nismos134 or email:ibsemailis@gmail.com trying to put together a vq240sx comunity and id like you to be part of it! ps email me pics! |
Congrats, Irax! DIY thread coming soon? 
|
irax
Offline
821 posts
VQ35DER Powered S14.3
San Diego CA
1-5-2004
|
| « Re: Re: (simmode1) | 7:03 AM 7/19/2009 |
|
well visit the websitevq666.com though no info is up yet, and honestly it is a stupid amount of work so no DIY info yet until we can make things easier.
|
simmode1
Offline
5140 posts
1993 chuki & 1996 zenki
Euless TX
8-17-2007
|
| « Re: Re: (irax) | 12:16 PM 7/19/2009 |
|
| Quote, originally posted by irax » | | honestly it is a stupid amount of work so no DIY info yet until we can make things easier. |
Thank you for your dedication to this cause! I think the s-chassis community owes a debt of gratitude to you and the other guys putting in the hard work to simplify this for the rest of us... 
|
irax
Offline
821 posts
VQ35DER Powered S14.3
San Diego CA
1-5-2004
|
| « Re: Re: (simmode1) | 5:48 PM 7/19/2009 |
|
please sign up for the forumsvq666.com/forum/
|
dan14sweeney
Offline
182 posts
95 240sx
Granbury Texas
2-6-2009
|
| « Re: Re: (irax) | 11:16 AM 7/25/2009 |
|
Irax....where you really able to just reflash the ecu and then splice in the 240 harness?
1995 240sx: Stance Gr+, Sportmaxx wheels, Espelir JGT500 exhaust, AEM intake, Isis Shifter
2000 Frontier 4x4: Calmini SAS w/dana 44, short ram intake, dual exhaust, 33x11.5x15 bfg all-terrains
|
adriano1k
Offline
11 posts
n/a
sunrise fl
4-9-2009
|
| « Re: Re: (dan14sweeney) | 10:18 AM 7/26/2009 |
|
subscribed. ive got four vq motors and two trannies. been up in the air if i should vq or rb, my boss has a spare motor. never had a boosted car, but i love the raw all motor power of the 350.
|
irax
Offline
821 posts
VQ35DER Powered S14.3
San Diego CA
1-5-2004
|
| « Re: Re: (dan14sweeney) | 8:19 PM 7/26/2009 |
|
I didn't do it because i got it to run without having to need to. but technosquare/jwt/uprev offer that kind of service for the 350z ecu and it is super easy to splice into the 240sx harness.
|
dan14sweeney
Offline
182 posts
95 240sx
Granbury Texas
2-6-2009
|
| « Re: Re: (irax) | 10:36 PM 7/26/2009 |
|
| Quote, originally posted by irax » | | I didn't do it because i got it to run without having to need to. but technosquare/jwt/uprev offer that kind of service for the 350z ecu and it is super easy to splice into the 240sx harness. |
Well if you still have my email Irax email me I have mounts and everything the hard part is the harness for me
|
Yellow4g63
Offline
2637 posts
95 RB20 240, 91 NX2000 VE power, 95 Stock 240sx
Moreno Valley CA
1-20-2003
|
| « Re: Re: (dan14sweeney) | 10:46 AM 8/6/2009 |
|
http://www.youtube.com/watch?v=YtcCPtLBXvI
SSautocrap http://www.bblgroup.us/ssautochrome.htm
http://www.protech-fabrication.com/
http://www.drag240sx.com/
[
| Quote, originally posted by NizzansDET » | | lol 12.8 A/F is rich dude! 14.7 is that prefect air fuel ratio. anything below 14.7 is rich and anything above 14.7 is lean! |
|
| |
