I know a lot of you have been asking about these and waiting for this release, so to get this started off right for you guys we are doing a group buy.

These coilovers have only been relased to a select few people as no other shops even have a stock of these yet. We are going to do a list and make a big order for you guys, so everyone will be getting these around the same time. You place your order and you get on the list, then you are guranteed one of the first kits. It's that simple!

MSRP on these kits is set at $1250. But we are going to do this opening group buy at just $999, WITH FREE SHIPPING in the U.S.A.!

There is no limit for this GB, but get on quick, there are a limited number of spots on our first shipment so don't delay, PM us to place your order!

On to the pics and specs!

(07+ Altima)

07+ Altima spring rates - 7k/7k

02-06 Altima and Maxima - 6k/7k

-Mono-tube shock design
-30 levels of damping force adjustment
-Separate Full length height adjustable
-Pillowball front mounts or Camber Plates (where applicable)
-One year warranty
-Coilovers use 46mm pistons and 53mm shock housings, the enlarged shock cartridges with specially designed pistons and rods provide a wide range of damping force.
-Valves are constructed of special spring steel, which outperforms stainless steels and produces longer valve life. Valve stacks use a patented deflective system to provide more precise control.
-Patented concave lower locking ring, to prevent unseating
-Springs are made of SAE9254 high strength, durable steel. Compression tested at over 500,000 times with less than 5% deformation
-T6061 Aluminum utilized in spring locks and seats for high strength and lightweight
-Piston rods are constructed of highly polished steel to lengthen oil seal life and prevent leaking
-High pressure inner rod guide seals ensure a perfect fit for consistent fade resistant damping and long shock life.
-2 step coating process utilizing nickel and chromium plating to prevent corrosion
-Newly developed lubricant oil in all shock cartridges minimizes aeration and cavitation.
-An additional bearing beneath each pillowball mount provides a smooth action and prolongs the life of the pillowball itself.
-Each BC damper is individually dyno tested before leaving the factory, making sure each damper is matched to within 5%, ensuring an equal balance in handling. OEM standards are 13% in comparison.

We also carry full lines of BC Racing coilovers for ALL Nissan and Infinity vehicles, PM us for sale pricing!

Group Buy list:
1. 3ugene
2. BFlores
3. Nordy
4. Wwang
5. Nnguyen
6. Jdavids
7. armed coupe
8. MCheddadi
9. MDiaz
10.
11.
12.
13.
14.

:

Circuit Motorsports - "Affordable Performance"
sales@circuitmotorsports.net
http://www.circuitmotorsports.net

Modified by Circuit Motorsports at 12:23 PM 4/30/2009

Modified by Circuit Motorsports at 2:43 PM 4/30/2009

Modified by Circuit Motorsports at 3:52 PM 4/30/2009

Modified by Circuit Motorsports at 9:44 AM 5/2/2009

Modified by Circuit Motorsports at 6:05 PM 5/9/2009

Modified by Circuit Motorsports at 10:48 AM 5/17/2009

Modified by Circuit Motorsports at 4:11 PM 5/22/2009

Email - sales@circuitmotorsports.net
AIM - circuitms
Site- http://www.circuitmotorsports.net

kg/mm to lbs/in
-----------------------------
16 = 896
15 = 840
14 = 784
13 = 728
12 = 672
11 = 616
10 = 560
9.0 = 504
8.5 = 476
8.0 = 448
7.5 = 420
7.0 = 392
6.5 = 364
6.0 = 336
5.5 = 308
5.0 = 280
4.5 = 252
4.0 = 224
3.0 = 168
2.0 = 112

Thanks for the warm welcomes!

GB list updated!

The damping knob in the front is easily accessible from the egnine bay. The rear knob will be located above the rear tire in the wheel well. Jacking the car up should give you enough room to reach in there and turn it.

You will have to jack the car up and remove the wheel to adjust height as with most coilover systems. But once your ride height is set you shouldn't need to adjust it.

Modified by Circuit Motorsports at 9:20 PM 4/30/2009

Wait time is only about 2-3 weeks, so you place your order, pay for the kit and you get your spot on the list. We tell you when they are shipping and provide a tracking number as soon as they leave the shop

The reason we are doing a group buy is so you get your kits ASAP. There is a limited number of kits can can come in on a shipment, so we can't stock a huge amount of kits at one time. Instead of placing small onesy-twosy orders we just do a group buy and place a big order for you guys special

hahaha to all those people that were impatient and went and bought the eibachs or H&R springs. these coilovers are the real deal, and i will be purchasing them later on this summer.

ive heard many good things about BC racing from multiple sources, and they make great coilovers for nissan vehicles.

i need some money now!

And you can get a nice even drop with these. They are all dual-height adjustable. So you can get ther car to exactly the height you want it consistently.

You can even corner weight it.

Looks like a great product and Im happy that they are out

Actually, I have the Eibachs and my car couldnt sit any lower or my fenders and tires would touch. I also enjoyed spending all of that money that I saved on other mods

Props to BC for making these and not slacking like other companies, but the springs serve a purpose to those of us who dont need these.

I had to wait to wait 4 weeks for a set of BC's for my Lexus but it was worth the wait, beleive me...

Im inpatient too but quality products are always worth the wait.

Modified by nordy at 5:22 AM 5/4/2009

Rotora Brake Upgrades

Hey um Circuit Motorsports, so do we Hawaii people get free shipping also? How long do we have to wait for these if we order them? TIA.

10-14 days is normal time I have been told, rush shipping to get the kits will cost more than the price we have ordered at. I will let Circuit MS confirm but that's what I asked several times just to make sure and I am fine with the 2 week wait without paying a premium for air freight.

There are NO Altima kits available yet in the States, they have JUST been finished and are currently shipping over to us. We are taking orders for these kits, it's first-come-first-serve. So you place your order and you get on the list, that way you are guaranteed a kit. There will not be many on the first order, so if you wait until these are "in stock" you may miss out for awhile.

Nguyen asked to receive his kit inside of a week, which I informed him was not possible as we haven't even received them yet. I informed him that he could pay extra for a kit to be dropshipped directly from the overseas factory if he wanted, and apparently he got upset.

Loop got a special "trial kit" for testing. He did an excellent job and we thank him for it.

We are just trying to bring these kits to you guys as fast as possible and at a good price.

Hawaii will be a bit extra on shipping, and the wait time will be about the same.

Hopefully that answers your questions. If anyone else has any questions just let us know.

Thanks.

Modified by Circuit Motorsports at 3:41 PM 5/5/2009

sales@circuitmotorsports.net

Thanks

- Edwin

Thanks