jmd
Offline
16 posts
86 D21 & 79 280zx
Baton Rouge La
8-21-2008
|
| « Re: Need photos of engines for an article. Any help wo ... (Big-Bird) | 5:17 PM 8/24/2008 |
|
I can get you the Z24 pic tomorrow, before I start pulling it out. How about a pic of the RB20DET I'm putting in it?
|
Big-Bird
Super Moderator
Offline
771 posts
2000 Xterra on 'Roids & 2004 Quest SL
Calgary AB
8-3-2006
|
| « Re: Need photos of engines for an article. Any help wo ... (jmd) | 9:43 PM 8/24/2008 |
|
Sure, both would be nice. Perhaps you coud take a pic of the NAPZ with the air cleaner off so a person can see the valve cover and intake system?
|
Desert Rat
Trucks Moderator
Offline
832 posts
1998 Frontier 4x4, 2002 Xterra 4x4
Mesa AZ
1-17-2007
|
| « Re: Need photos of engines for an article. Any help wo ... (Big-Bird) | 6:36 AM 8/25/2008 |
|
Here's my KA24DE complete with a pacesetter header and my special burrito modification.
SWANKy - Southwest Area Nissan Klub (yota)
|
nis720
Offline
103 posts
86' Nissan 720 truck / 06' Silverado truck
Compton CA
2-17-2006
|
| « Re: Need photos of engines for an article. Any help wo ... (Desert Rat) | 7:07 PM 8/25/2008 |
|
LOL.. Desert Rat... I might have to steal that idea.Here my KA motor pics. 
Here's the Z24 pics. 
Still plays with trucks
http://members.cardomain.com/nis720
|
nismopu
Offline
293 posts
1987 300zx, 1997 Max, and 1976 Turbo Z
VANCOUVER WA
6-24-2005
|
| « Re: Need photos of engines for an article. Any help wo ... (nis720) | 9:27 AM 8/26/2008 |
|
I have a crap ton of pics of all the different KA's on my photobucket. I'll PM them to ya. peace.
|
nismopu
Offline
293 posts
1987 300zx, 1997 Max, and 1976 Turbo Z
VANCOUVER WA
6-24-2005
|
| « Re: Need photos of engines for an article. Any help wo ... (nismopu) | 12:21 PM 8/26/2008 |
|
240sx single cam, with truck rear sump pan
ugly welds for the clearance needed to run the truck pan
frontier KA24DE, notice the Mexico stamp?
Small turbod KA in a HB we built a few years ago
KA truck rear sump pan
240sx single cam girdle and pan
my l-28
my TT vg...lol
 ok ok thats enough. Sorry if some of these arent what your looking for. I just love engine listing posts. peace.
|
JC87HB
Offline
41 posts
1987 Nissan D21 HB
columbus Ga
4-1-2008
|
| « Re: Need photos of engines for an article. Any help wo ... (nis720) | 4:02 PM 8/26/2008 |
|
Z24i from a 1986.5 (bought in 87 72k miles) looks like a mess in there
|
Big-Bird
Super Moderator
Offline
771 posts
2000 Xterra on 'Roids & 2004 Quest SL
Calgary AB
8-3-2006
|
| « Re: Need photos of engines for an article. Any help wo ... (JC87HB) | 8:53 PM 8/26/2008 |
|
Thanks gents. That should do for the NAPZ24 and KA24s
now all I need is:
4) Z22S - Carbed version
5) Z22E - Fuel Injected version. Once I have these engine images I am going to start on the tranny stuff. My plan is to build a cross reference list for engines and tranny's in the Nissan Trucks from the early 620's all the way up to the 2004 Xterras & Frontiers. This could eventually include the heads, intakes, exhausts and power up bolts ons (turbos, SC units)
|
nismopu
Offline
293 posts
1987 300zx, 1997 Max, and 1976 Turbo Z
VANCOUVER WA
6-24-2005
|
| « Re: Need photos of engines for an article. Any help wo ... (Big-Bird) | 6:03 PM 8/27/2008 |
|
you want pics of what a frontier tranny looks like? there quite a bit different looking. Almost like an r30a and HB w71c.Also, contact Datsunmike or Datsunaholic over at IamTrolling.com for pics and info on the engines your looking for. peace.
|
moparvwfreak
Offline
203 posts
1973 Datusn 620, 1995 Nissan Pathfinder SE
Monroe Wa
3-6-2008
|
| « Re: Need photos of engines for an article. Any help wo ... (nismopu) | 6:55 PM 8/28/2008 |
|
| Quote, originally posted by Big-Bird » | I can certanily use some of the old L series engines. Lay em on me!
thanks! |
from a thread in the datsun section this si my stock 73 L16 i can get more for you if you like. its not clean but its all there.
Dodges, Dubs, Ford, Chevy and now a Datsun. i am a glutton for punishment.#655321 I have seen the way of the trunk, and it is good! 1973 Datsun 620 , 1995 Nissan Pathfinder SE
Ratsun.net
|
Big-Bird
Super Moderator
Offline
771 posts
2000 Xterra on 'Roids & 2004 Quest SL
Calgary AB
8-3-2006
|
| « Re: Need photos of engines for an article. Any help wo ... (moparvwfreak) | 10:14 PM 8/28/2008 |
|
I trolled the datsun forum and liberated that image. Thanks.I am certainly going to have fun with this little pet project. I am off to the dealer this Friday to get some images from the Nissan database that my Parts Guru has access to. Has said he can get me images of every engine used in the Nissan trucks/SUV's from the 720's all the way to the Titan. Tranny's are gonna be next. A good solid cross reference database of engines/tranny''s will really help my fellow Nico-naughts in the engine swaps. 
|
Reverend D
Altima Moderator
Offline
1574 posts
1995 Nissan D21 Hardbody KA24E
Western NY
1-12-2003
|
I have some older service manuals that list out model information, it's for the early 80's trucks.
 
|
Big-Bird
Super Moderator
Offline
771 posts
2000 Xterra on 'Roids & 2004 Quest SL
Calgary AB
8-3-2006
|
| « Re: Need photos of engines for an article. Any help wo ... (Big-Bird) | 3:48 AM 9/2/2008 |
|
BUMP!Anyone got images of a Z22 E or S model engine???? 
|
ketshy
Offline
37 posts
1990 300ZX 2+2
Seattle Wa
10-10-2007
|
| « Re: Need photos of engines for an article. Any help wo ... (Big-Bird) | 1:17 AM 9/14/2008 |
|
Well Let's see... I have a Z20 that I believe judging by the valve cover was a Z20E originally, a Z22S and a Z24S but none of them are assembled or in anything. I can get you pictures of a Z22E manifold if you need or pictures of the inner components of any of those motors and an L20b shortly. Let me know if any of it would be useful.
|
| |
