Adding Ex. Wastegate to Stock Rb20

[moso240]

I seen this on ebay and since my 60-1 hit the stock manifold and needing a external gate i fiquired this will kill 2 bird with 1 stone bu b4 i do that has anyone tryed on of these and whats your feedback on it?

[TSL]

Check your clearance first.

Depending on the the size of the turbo and what car it is fitted in, you may run into problems with clearance from the strut tower.

[Yellow4g63]

I seen this on ebay and since my 60-1 hit the stock manifold and needing a external gate i fiquired this will kill 2 bird with 1 stone bu b4 i do that has anyone tryed on of these and whats your feedback on it?

I don't think those adapter boxes work too great. Not much of a collector there now.

[moso240]

rb20 stock manifold .70 a/r 60-1 garrett into s13 using unknown mounts deff not r32 tho

[240z4u]

Not sure how big your turbo is, but my t3/t04 e definitley would not fit with that installed. Despite it being not so ideal, It would control boost fine there likely. Thats basically where mine is.

Evan

[BoostFab]

looks like the input and output flanges are parallel, you need them angle abit so the turbo won't hit anything.

[BoostFab]

this is what i'm talking about when i said the inlet and outlet flange need to be angled. to clear the car's frame.

i had made some of these in the past for some rb fellows using their stock manifold with external gate (and/or) aftermarket turbo.

[moso240]

if you could make one up for me i would rly rly appreciate it ill make it worth your time $$

[BoostFab]

what size exhaust housing are you running on the 60-1, and is it t3 or t4 input flange ?? it will be pretty tight with that size turbo.

[moso240]

.63 exhuast side .70 intake side T3/T4 hypbrid

[BoostFab]

.63 exhuast side .70 intake side T3/T4 hypbrid

t3 turbo flange it is. are you using the 38mm external wastegate ?

[WhatsADSM]

Yup, I had one just like the one boostfab posted up on my old RB20. Worked like a charm.

[craz4240]

If you can email me a price for a 57 trim t3/to4e with V-Band Synapse 50mm gate I am interested for my rb20.

[email protected]

[moso240]

If you can email me a price for a 57 trim t3/to4e with V-Band Synapse 50mm gate I am interested for my rb20.

[email protected]

Are you ok? Well Thanks Anyway man i cant go this route becuase the shop wants 1600 for a downpipe if i go that route rip off so i bought a 6boost manifold

[fast_s14]

6boost ftw

[moso240]

i hope so i can wait to get this finished

[BoostFab]

the stock manifold and adapter is alright for a t3 upgrade to external gate.

A full aftermarket manifold is ideal for performance conscience minds with large turbo upgrade, and for those that want to dish out the $. =)

[craz4240]

Are you ok? Well Thanks Anyway man i cant go this route becuase the shop wants 1600 for a downpipe if i go that route rip off so i bought a 6boost manifold

Am i ok yes perfectly what about you?

[Flamereka]

Hey I'm interested in the adapter that you made. Can you give me a quote on one for a t3/t4 .48 A/R 50 Trim T04E that is. Also wastegate 40mm. Does the wastegate have to be that high as well and that would cause a long pipe to downpipe or can you angle it down? I don't want to vent to atmosphere.

[bades]

very nice fabwork.. i like the look and when i go big turbo ill prolly be cum ur way

[240z4u]

very nice fabwork.. i like the look and when i go big turbo ill prolly be cum ur way

Gross

[Yellow4g63]

very nice fabwork.. i like the look and when i go big turbo ill prolly be cum ur way

LoL I thought I was the only one who saw that.

[splitime]

Instead of using an adapter... why not have it done this way?

^^ is for sale in the FS thread in this forum section. Saw it the other day and thought it might have some bearing...

The format above is what I'll be doing when its time for an ewg on a budget format.

[moso240]

6 boost FTW Free Post