http://www.modifiedcartrader.c..._sale

This is my 2003 Evo 8. The pictures here are about 1 year old. Except the ones of the motor being rebuilt. I just got dont rebuilding the motor due to the number 3 piston skirt breaking. The good thing is that it didnt mess the cylinders up. So I pulled the motor and took it to a machine shop and had them bore it .20 over because i didnt want to use custom pistons again. I replaced all the seals, gaskets, oil squirters, bearings, Freeze Plugs, everything having to do with the engine internals is brand new. The only thing left to do is finish breaking in the engine and get it dynoed. The previous numbers were 326AWHP and 334AWTQ. Keep in mind that i still need to get a good tune done and then I will have some newer numbers. The engine currently has 850 miles on the rebuild. Here Is a list of all the stuff that is in the engine and the car:

-4G63T Bored .20 over
-Brand new CP pistons .20 overbore
-Eagle conecting rods
-Brand new ARP hardware in entire motor
-Brand new Clevite main/rod/bearings
-Brand new EVO9 Headgasket
-Full Race Head-Port and Polished
-Brand new Supertech 1MM oversized intake/exhaust valves
-Ferrea valvetrain
-HKS 272 camshafts intake/exhaust
-680CC Injectors/ Also have the stock ones
-Brand new Fidanza adjustable cam gears
-Brand new Fidanza Lightened flywheel
-Brand new ACT stage 3 street clutch
-Brand new Power Enterprises timing belt
-Brand new serpentine belt
-All new sensors, Vacuum hoses
-Brand new AEM UEGO Gage
-Brand new Apex-i Neo AFC
-Brand new Full Cutsom ECU Flash by DynoFlash
-TSW Thruxton Wheels 18X8
-Brand new Sumitomo HTRIII Tires 235-40ZR-18 95Y
-HKS 3IN Intake
-Greddy BOV
-HKS Full 3IN turbo back exhaust
-Aftermarket header
-Stock Turbo
-Stock Intercooler
-Manual boost controller/ Soon to be Apexi AVCR, Just needs to be installed
-23 LBS of boost
-Brand new starter
-Brand new Engine/transmission dust plate.( plate the starter bolts through)
-Front and rear strut tower bars
-Eibach lowering springs
-Brand new timing belt tensioner
-Brand new timing belt covers
-Weapon R oil catch tank
-Exhaust wrap on the downpipe and the header
-Brand new sparkplugs, wires, boots
-Brand new hose techniques silicone vacuum hoses
-I think there is more stuff but i can think of it right now

The bad-A couple minor scratches around the bumpers. The Hood and spoiler need to be re-clearcoated.
-I recently took the spoiler off and put in hood spacers. Ill have pics up tomorrow.

You should get a little better pictures of it.
Like, the whole car you know?

But still- Bump