18 inch qx56 rims on a 99 qx4??

[Qxxx4]

http://toronto.kijiji.ca/c-Vie...C4000

do you guys think this would look good with med profile tires? how much you think a decent set of treads for these would be and do you think id be able to find a set of these for cheaper than this?

id love to have these in my qx4 i think theyd look really good and not so "blingy" since their still infiniti rims!

[AJRK]

They would look great! There were some pictures of a white QX4 floating around here awhile back with those rims. If I remember correctly, the center hole had to be bored out a little to fit the QX4... the hubs of the QX56 are smaller. If you can get that done, they'd look awesome.And you should probably figure close to $1000 for good rubber.

[fueler]

it would look good but that price is too high (in USD at least) because you still have to get the center bored out (way too small on those rims) which is gonna run you more money, you can get aftermarket rims for that price

Or you can get chrome 17" escalade wheels for $200-$300 , you have to get those bored out too, cheaper than QX56 but look just as hard

[dejavu]

I had mine bored out (1 inch) at a maching shop, don't really recall the cost but it I think it was around $60. Look around craigslist/ebay and you should find a set for a good price. Tires for 18 inchers are $$$, but you can always find second hand treads since the size is common for x5's and cayennes.

[Qxxx4]

that looks great!

[dejavu]

[Domenico]

like everyone said you'll have to make the center bore a little bigger...should cost like 50-75 each wheels....the qx4 center bore is 108 and the qx56 center bore is 77.8...good luck and i think its looks really nice with those wheels..i wish the 20 inch fx wheels fit our trucks but there 5 lug..

[pathy350]

woooooooow but i think u need spacers

[sixty4]

I found a pair of 2004 - 2007 QX56 wheels and the guy has them listed as being a Bolt of Pattern: 5 1/2? Is this true? Also anyone know what size tires are on the white QX4 above?

BTW I have a 2001