Here are a few from autocross last weekend. By the way, my old Works wheels shown in these pics will go up for sale soon. They are 3piece forged, 17", 5x114.3 with federal 595ss tires.

the front isn't actually as high as it seems. the passenger side looks higher because the fender was damaged by the previous owner and is sort of bent out of shape, so the wheel gap just looks huge. if you look at the front left fender, you'll see how its really sitting.

Modified by Automato at 11:58 PM 5/17/2008

GO TURTLE GO!

they're bricks with the yellow high beam, OEM
http://tunedbyjdm.ecrater.com/...30533

Quote, originally posted by gregfarz78 »

IMO 18s are too big for a s13 I think 17s look just right

18's are too big. it looks like a donk

agreed....better than hubcaps tho.

Quote, originally posted by ranzo1007 »

The baller wheels ima get are Sportmax 962's

I agree, imo the rims look to big for the car. i like the car though

i actually bought these headlights off this same exact seller. but iirc, he told me that he opened up the headlights and did the yellow himself, so i don't think it was actually oem.

the pictures don't do the wheels justice. in person, they don't look overly big but that is just my opinion. the old wheels were nice, but they were not wide enough and too sunken. i think the old ones were only 7" wide and they only had 225's on them. in autox and at the drag strip, i wasn't getting enough traction. i wanted to go with a setup that would give me good results on any track but also be streetable.

these wheels cost me $375 shipped from VA to NY. most of these g35 wheels i see go for $400+.

but your car is one of the only cars that can pull off the Sil80 look.

^I agree with him

Quote, originally posted by veebee »

i like the yellow on your headlights, too.

and him

Quote, originally posted by autoshadow »

but your car is one of the only cars that can pull off the Sil80 look.

and him

Quote, originally posted by autoshadow »

but your car is one of the only cars that can pull off the Sil80 look.

I was thinking the same thing.

Quote, originally posted by autoshadow »

but your car is one of the only cars that can pull off the Sil80 look.

mine is one of the few others that can do it too.

the headlights are sweet.

i liek the wheels think it needs dropped just a little more.

Quote, originally posted by nevertheless »

dibbs on wheels! a skyline spoiler would look good.

spoilerless FTMFW

"The whole setup ran me R1000"

Never heard of an "R" denominational bill. The ratio of "R100" to a US Dollar is rougly the same as the ratio of unicorns to leprechauns.

I Can't WAIT until they come!! I also got my baby new brake pads, Rotors, NGK Plugs, NGK Wires, and a new Exeddy Clutch..

the exhaust is an apexi n1 dual exhaust.

agreed, lower would be better but i only have tein springs and kyb shocks, so for now, its staying as is. plus, any lower and i'll have to do some fender work to avoid rubbing. i just dont want to deal with that right now.

no, i think the 40 series would fit fine in the back. but this is also my dd and i wanted to keep the diameter of the tire as close to stock as possible, so that was why i went with the 35 series.

Works wheels are up for sale here: http://forums.nicoclub.com/zerothread/338276

Modified by Automato at 7:10 PM 5/18/2008

Whatever dude, No need to be a little prick...
Actually they are nice rims, You drive around a ****ing 240SX with an SR20 in it and that isn't Ricey? Gimme a break kid..
We are all driving Nissan's..

So engine/drivetrain improvements are rice now, but 17" inch wheels aren't? Well...let's hear the specs on theose "rims" first.

And I drive a MINT condition bone stock 240SX with the exception of Tint and the rims (When they come) Because ALL of the 240's near where I live are all Fast & Furioused Out, and Mine is the cleanest one around, So I want to keep it close to showroom..

this is basically the rims im getting

going from just the pics on here... it looks mediocre. in reality, looks mean as hell. Dan is a guy of function/badassery. I've had the pleasure of riding in that car at 15lbs boost. HOLY ****. on a stock turbine... i can see why he wanted a larger contact patch with bigger tires...

BUILD THREAD:
http://forums.nicoclub.com/zerothread/306682

he already said what the exhaust was.

Man, I like the wheels. I'm selling a set right now because I need wider ones for he S14 with 50mm rears. I am not a fan of the black paint because I think they look better with the Aluminum finish. Your old wheels look nice too, but I think its too early to say anything until you decide on aero and we see the complete package.

all that talk about what is rice and what isn't needs to happen somewhere else. Please be respectful of the OP and keep his thread on topic.