Help!! put in sr20 motor and bent the power steering line??
Author
Post
mugenrsx
Offline
67 posts
salt lake city ut
5-1-2007
Help!! put in sr20 motor and bent the power steering line?? 9:15 PM 2/20/2008
so i was dropping it in, and my friend accidently dropped the motor to fast and it bent the power steering line, and it looks pinch so what would be the best thing to do??
duffman1278
Moe Man
Offline
5503 posts
89 240sx Hatch, the wildcats!
The Mutha Land ca
4-1-2007
IMO, get another line, your friend might have cracked it as well at the bending point.
http://forums.nicoclub.com/zerothread?id=340137 For Sale!! Rotors, Shocks, Hubs!
mugenrsx
Offline
67 posts
salt lake city ut
5-1-2007
« Re: (duffman1278) 8:50 AM 2/21/2008
well do the dealership have the part???
duffman1278
Moe Man
Offline
5503 posts
89 240sx Hatch, the wildcats!
The Mutha Land ca
4-1-2007
I'm pretty sure they do, but might be pricey
fast_s13
Online
507 posts
Hermann,mo
2-23-2003
« Re: (duffman1278) 6:41 PM 2/21/2008
i may have one let me do some looking
s14 parts for sale http://forums.nicoclub.com/zer...d=224 2005 ninja 95 240sx s14 sr20det, Eagle rod's,JE Piston's,Brian Crower 272 Cam's ,Brian Crower +.5mm valve's,Brian Crower spring's,Brian Crower Titainum Retainer's,ARP Bolt's through out,Greddy 1.4MM Head Gasket,New OEM Timing set, New OEM Oil Pump,ACT Prolite Flywheel,ACT 6 Puck Extreme Race disk,ACT Extreme Race Pressure Plate,FMIC,Blitz dd,Z32 maf,Apexi Power FC,Hallman Boost Controller ,Walbro 255,Megan FPR,lc-1 wideband,Stance gt+pro coilover's,Progress technolgy rear sway bar,peak performance tension rod's,Rota P45 Wheel's, Toyo Tire's,and much much more
codyace
Offline
948 posts
S14 w/redtop
Stroudsburg PA
4-26-2005
What line bent?
Cody Ace - 1997 240sx - SR20DET - GT2871r .64 - 400whp, 330 ft lbshttp://www.jimwolftechnology.com For badass ECU's/Cams/Clutches!
slow s13
Offline
743 posts
cars, photo, music
Quad cities, IL
11-11-2002
« Re: (codyace) 7:46 PM 2/21/2008
probly the ones one the crossmember
'92 coupe 5 speed '93 hach junkyard special
nzmoman
Offline
2204 posts
240sx 2 of em' and always lookin for more
Atlanta GA
5-22-2006
« Re: Help!! put in sr20 motor and bent the power steering line?? (mugenrsx) 7:49 PM 2/21/2008
i am parting an s13 right now. I have those lines...I will email you. let me know if you need them.
current build: Copycat- Project Kouki:
mugenrsx
Offline
67 posts
salt lake city ut
5-1-2007
« Re: Help!! put in sr20 motor and bent the power steering line?? (nzmoman) 10:04 PM 8/19/2008
Are you still parting out the s13? cause i have a bent s13 gear housing or power steering line when i put in the motor and wondering if you have them?
supreamS14
Offline
743 posts
96 240sx S13-blacktop Sr20deT
pinellas park florida
1-4-2007
« Re: Help!! put in sr20 motor and bent the power steering line?? (mugenrsx) 1:31 AM 8/20/2008
I think that line is just to let the fluid cool down. It touched my alternator and it started leaking(that fluid will kill an alternator). I replaced the section with a hose clamped to it. Could I cut that line out and replace it with a PS fluid cooler?
Powered by ZeroForum 2.4.0. ©2008 RelyNet, Inc.
< Contact Us - NICO
>
Copyright © 2000-2008 by NICO