Does a SR20VE bolt onto a GTIR SR20DET gearbox? I have a close rato iR box and I don't want to throw it away.

Thanks guys,
Chris.

I have a OSgiken twin plate clutch for the GTI-R so I can use the flywheel and clutch from that. If not, I can just sell them off..

My main concern is if the bellhousing bolts up to the SR block, I assume it should as well being the same engine code, although i've heard GTIR run different blocks...

If normal SR20 gearboxes bolt to the GTIR I'm assuming it should be fine.

This setup should turn out good!

And if the input shaft on the GTiR tranny is diff than a DE/VE then that would throw the clutch out as well. You would need a custom flywheel to mate it possibly.

Let us all know what you find.