garage-c
Offline
38 posts
RB25DET powered S14a
Houston TX
6-8-2007
|
| « Re: N1 oil pump vs stock RB26 oil pump (Cjmartz2k) | 6:22 AM 12/26/2007 |
|
This picture should explain it all... Top is the stock pump, bottom is the N1 pump. Notice the larger volume of the cavities created by the drive gears on the N1 pump (high volume) & the extra bolt hole. Also, the drive gears on the N1 pump are made of much harder steel. That whole bull**** about the two pumps being the same but with different springs is completely WRONG.
|
SeVa-S13
240SX Moderator
Offline
8668 posts
05 Pontiac GTO ~420whp
Ft. Bragg NC
1-23-2003
|
Good pic. ^^^
WTF makes you think all caps is a good idea? DIAF.
|
HxC_Nismo
Original? Creative? Eh.
Offline
584 posts
98' Nissan 240sx SE R33 RB26DETT
Columbia MO
9-23-2006
|
| « Re: (SeVa-S13) | 10:28 AM 12/26/2007 |
|
+1 that clears up alot on stock vs n1 oil pump
  
-Hans-
98' 240sx SE R33 RB26DETT HKS GT2530 488RWHP 415RWTQ @22psi
02' Sentra SE-R- Daily Driver
http://www.midwestce.net
|
StricNyne
Offline
2724 posts
10-30-2003
|
i run N1 well will once my car actually runs haha most aftermarket ones run at roughly 900 bux !!!
|
Cjmartz2k
Offline
922 posts
'92 Skyline w/RB25 & Holset HX40
Japan
5-19-2007
|
| « Re: (StricNyne) | 2:45 PM 12/26/2007 |
|
Well, looks good to me. Thanks a bunch!! I have an oppurtunity to buy one for $200 or less new, so I think I'll jump on it. Is it high volume and high pressure?
|
BoostFab
Offline
3504 posts
Nissan Land
12-3-2003
|
yeah the "heard" and "truth" is quite skeptical and rarely meet.
L@@k --- Group buy deal on turbo blankets
|
Sydneykid
Offline
1 posts
R32GTST (RB31DET), R33GTST, Stagea
Sydney NSW
1-1-2008
|
What "standard" oil pump is that?
There are 12 "standard" RB pumpsWhat N1 oil pump is that
There are 4 N1 pumps Cheers
Gary
|
Cameron
Offline
2533 posts
a 240
Atlanta GA
6-3-2007
|
| « Re: (Sydneykid) | 12:36 AM 1/2/2008 |
|
SIDNEY KIDDDDDDDDDDDDDDDDDD!! Glad to see you finally joined nico mate. i re read your oiling fix thread daily lol Welcome, enjoy your stay!
|
silviasgp06
Offline
293 posts
95 zenki RB25 Powered
Grand Prairie Texas
4-2-2007
|
| « Re: (ZenkiCam) | 9:00 AM 1/8/2008 |
|
got one from nismoparts.com for $197.00, others wanted $250 - $350, who would of thought it would be cheaper directly from nissan. The invoice said it shipped from Tacoma Nissan Subaru, from Washington. Also picked up a tensioner timing pulley, but the idler was out of stock so ill get it later on.
|
jt15833
Offline
892 posts
7-9-2005
|
| « Re: (silviasgp06) | 9:06 AM 1/8/2008 |
|
look how much bigger the oil cutouts are on the pump covers.
|
Cameron
Offline
2533 posts
a 240
Atlanta GA
6-3-2007
|
| « Re: (silviasgp06) | 12:54 PM 1/8/2008 |
|
nismoparts.com, and shay is the Shiznit.. He took care of me real good, ordered a gasket set from him and not everything was there, so he sent me a brand new one again for free! +1 for Shay
|
| |
