1991-1994 240sx: Door panel removal tutorial.

[vancouverbc]

Index of all Tutorials

Door panel removal:

1. Remove the two philips head screws.2. Remove the frame around door handle.3. Carefully peel door back by applying outward pressure where the snap on fasteners resist. (see pic for location of snaps)( no snaps at top)4. Lift controls out of armrest being careful to unplug electrical connection(after 1991, there might be extra clips( plastic and steel) holding controls. see last two pics.Use putty knife to push in and release)5. Gently lift door panel up and out at top where gasket meets window.

panel



door handle still in place after panel removal

back side of door panel

frame around door handle



controls in arm rest



controls out of arm rest



For 1992 plus you might have an extra clip(some people unsnap door panel and reach up from bottom to unfasten metal clip)



[URL=http://imageshack.us][/URLLinks

Door Fabric replacement:

http://www.nicoclub.com/articles.php?id=175775

[i
Modified by vancouverbc at 3:02 PM 9/22/2009

[yokota180sx]

you should however, pull from the bottom so you dont damage the seal at the top of the door

[Spiffy240]

way to totally use my picture for the door panel removal tutorial