boost_boy
Moderator
Offline
5311 posts
1990 sentra w/ CA18DET
Miami Fl
11-14-2002
|
| « Re: DSM resistor <--> CA18DET (MasterZenki) | 12:14 PM 8/26/2006 |
|
Great Job! Dee
Who's selling their CA18 next  ?
Forged pistons are no insurance for ignorance  .
Spending money foolishly doesn't equate to a high hp car  .
Being cheap all the time equates to a waste of time 
And lastly, I'm not done; for I've only just begun, so stay tuned  Dee
|
sam31183
Offline
23 posts
1985 Nissan 200SX CA18DET Swap
Long Beach Washington
8-8-2006
|
hip hip horray...adding this to my comp...
|
float_6969
Moderator
Offline
11425 posts
1995 Nissan 240sx
Topeka Kansas
8-26-2002
|
Thanks! That looks great. I added a link to this thread in the stickies!
After a long break, Project CA S14 is revived! Check it out NOW!
|
NeedCAforS13
Supporting Member
Offline
4580 posts
E46 M3 and SR S14
Oldsmar/Tampa FL
1-13-2003
|
nicely done. thanks.
///M powa.
|
MasterZenki
Offline
215 posts
1990 240sx
Dover DE
8-20-2006
|
| « Re: (NeedCAforS13) | 6:59 PM 8/28/2006 |
|
but wait.....thats not all....i also found a site selling DSM resistors....http://www.amsperformance.com/...d=792 enjoy!
 :
|
rico05
I pwn.
Offline
6333 posts
1992 RMS13
Dallas Texas
6-23-2003
|
Pic no worky anymore:(
SR20DET = 189cc Wasted.click banner below for Rico's homepage:
 | Quote, originally posted by dickie » | | some hard gayness in this thread. |
|
NeedCAforS13
Supporting Member
Offline
4580 posts
E46 M3 and SR S14
Oldsmar/Tampa FL
1-13-2003
|
host on nico.
|
float_6969
Moderator
Offline
11425 posts
1995 Nissan 240sx
Topeka Kansas
8-26-2002
|
MasterZenki, I sent you an email....
|
oversteer180
Offline
894 posts
1990 Silver 240sx
Azle Tx
3-15-2005
|
has anyone confirmed this to work?
|
float_6969
Moderator
Offline
11425 posts
1995 Nissan 240sx
Topeka Kansas
8-26-2002
|
Pic fixed. It shouldn't go back down again.
|
MasterZenki
Offline
215 posts
1990 240sx
Dover DE
8-20-2006
|
| « Re: (oversteer180) | 6:35 PM 8/29/2006 |
|
| Quote, originally posted by oversteer180 » | | has anyone confirmed this to work? |
I CONFIRM this to work  lol my car wouldnt be running if it wasnt so...ill take pictures tomoro how i set it up 
|
nogaroberry
Offline
13 posts
1985 ca18det 200sx
Frederick md
1-3-2007
|
| « Re: DSM resistor <--> CA18DET (MasterZenki) | 9:37 AM 2/4/2007 |
|
i have a dsm resistor on my ca...does is matter if the injectors are not in that particular order? or can any wire(except for the 12v) go to any injector? thanks for the help
|
float_6969
Moderator
Offline
11425 posts
1995 Nissan 240sx
Topeka Kansas
8-26-2002
|
| « Re: DSM resistor <--> CA18DET (nogaroberry) | 10:46 AM 2/4/2007 |
|
Since it's simply dropping the current, no, it shouldn't really matter.
|
capowered240
Offline
478 posts
90 240sx
Georgetown Tx
4-5-2005
|
| « Re: DSM resistor <--> CA18DET (float_6969) | 11:36 AM 2/4/2007 |
|
|
bias
Offline
248 posts
89 240sx hatch 93 240sx coupe
Greensboro NC
10-24-2006
|
| « Re: DSM resistor <--> CA18DET (MasterZenki) | 2:41 PM 2/4/2007 |
|
This is all new to me. Why the DSM resistor is it better or is it more available? Just a newb trying to understand.
|
Chris859
Offline
369 posts
'89 240sx w/ca18det
Pinetop Az
8-8-2006
|
| « Re: DSM resistor <--> CA18DET (bias) | 3:53 PM 2/4/2007 |
|
More available... and cheap to get.
'93 Cougar, Built 5.0, 5spd swap, upgraded suspension - Daily driver
'95 Eclipse rs, other daily driver
'89 240sx coupe, ca18det, silvia front end - Project/fun car
'89 R32 skyline, being torn down for inspection and rebuild.
'71 Subaru Star, EJ20tt swap, awd conversion - in progress
|
nismoplsr
Offline
344 posts
connecticut
10-19-2003
|
| « Re: DSM resistor <--> CA18DET (Chris859) | 3:24 PM 2/5/2007 |
|
Many, older atleast, h*nd*s use dropping resistors also. If anybody wants to go and put h*nd* parts on their Nissan. They can be wired up pretty much the same way.
CA18DET, HKS, Haltech, TurboXS, K&N, Unorthodox, Spearco, NISMO, Greddy, Cusco
|
Zzca18deTzZ
Offline
64 posts
1990 s13 coupe (TOTALED by a school bus), 1991 s13 HB w/ CA (SOLD)
Charlotte NC
2-11-2007
|
| « Re: DSM resistor <--> CA18DET (MasterZenki) | 9:05 PM 2/11/2007 |
|
im sean i just joined this forum.
i have been looking for a post like this forever! a guy refered it to me on another forum and here i am. i bought a s13 with CA swap and it has one of these DSM resistors in it. it also has DSM 440cc injectors. the reason i bring this up is b/c my CA wont start b/c it is not getting any fuel (or not enough fuel) at the injectors. j/w if maybe the resistor i have is wired up wrong or if its a possibilty the resistor could be bad.
just curious. im somewhat new to the CA so bare with me i guess.
thanks a bunch-Sean
SHIFT_work in progress 
|
float_6969
Moderator
Offline
11425 posts
1995 Nissan 240sx
Topeka Kansas
8-26-2002
|
| « Re: DSM resistor <--> CA18DET (Zzca18deTzZ) | 9:23 PM 2/11/2007 |
|
Welcome to NICO! If you could start a new thread I would be more than happy to give you some input.
|
dj2kat
Offline
6 posts
1992 nissan 240 sx coupe
hawley tx.
7-28-2006
|
| « Re: DSM resistor <--> CA18DET (MasterZenki) | 4:16 PM 3/11/2007 |
|
do you know what year model of car to get the risitor off of for the ca18det I see the picture but lost.
|
float_6969
Moderator
Offline
11425 posts
1995 Nissan 240sx
Topeka Kansas
8-26-2002
|
| « Re: DSM resistor <--> CA18DET (dj2kat) | 7:11 PM 3/11/2007 |
|
This is for using a DSM resistor pack on the CA18DET. AFAIK, any 1st gen eclipse/laser/talon should have this resistor pack.
|
CadetLD
Offline
114 posts
1991 Nissan 240sx Coupe
Clearwater FL
12-3-2006
|
| « Re: DSM resistor <--> CA18DET (float_6969) | 9:56 AM 1/23/2008 |
|
Okay so I scored a free set of DSM 440s, is this resistor pack nessisary for running DSM injectors? I thought you just swapped the o-rings, drop them in, and get it tuned.
I, too, Shane Hilliard, will obey the rules of the road. I will not drive like I'm delivering a donated organ. I will not purposely scare cows. I will not make light of gravity. Finally, I will recognize speed limits as strict law and not just ballpark suggestions.
|
capowered240
Offline
478 posts
90 240sx
Georgetown Tx
4-5-2005
|
| « Re: DSM resistor <--> CA18DET (CadetLD) | 11:41 AM 1/23/2008 |
|
| Quote, originally posted by CadetLD » | | is this resistor pack nessisary for running DSM injectors? |
Yes
|
ca18detgabby
Offline
1913 posts
92 s13 ca18det
lake mary fl
2-10-2007
|
| « Re: DSM resistor <--> CA18DET (CadetLD) | 12:59 PM 1/23/2008 |
|
it is required to have a low imped resistor, but it doesnt have to be the DSM one you can run the OEM CA resistor if you are currently using it.all that matters is the proper juice gets to it........ 
 | Quote, originally posted by r34 gtr » | | Who gets rid of their CA's? People who suck, thats who. |
|
float_6969
Moderator
Offline
11425 posts
1995 Nissan 240sx
Topeka Kansas
8-26-2002
|
If you're just swapping in the DSM injectors from your stock injectors, the stock CA resistor pack is fine. This is for the people that don't get the resistor pack with their motorset.
|
CadetLD
Offline
114 posts
1991 Nissan 240sx Coupe
Clearwater FL
12-3-2006
|
| « Re: (float_6969) | 10:23 PM 1/24/2008 |
|
^ TY float, thats what i needed to hear.
|
| |
