Modified by wirelessalpha at 7:36 PM 6/3/2007

Modified by wirelessalpha at 7:36 PM 6/3/2007

"Don't yuk someone's yum"
- My wife

My Project Thread: http://forums.nicoclub.com/zerothread/186340
The baddest NJ driftboyz: http://www.clubloose.com/
The best fabricator in NJ for cages: http://www.tipengr.com

1. Finish off my doors. Looking mad getto.

2. Return some tools to Home Depot after I finish my doors (hehe).

3. Score a MAF sensor somewhere...I think mine is bad (sorta boggy here and there).

4. Buy/Install some real buckets and a freaking small cage. No more getto harness strap mod.

5. Wheels...I dunno yet...something wide I guess....maybe some knockoffs.

6. Paint! (after I get some $$$.. )

and of course, all the while...get some practice time on enough weekends as I can...


Attachment: rear.JPG (83344 bytes, downloaded 4309 times)

<-- Guilty.

Great thread Chi. That's a nice 'vert my friend. Luv the es ar twenty.
Any luck tracking down a boot?

Joshua 1:9 "Have I not commanded you? Be strong and courageous. Do not be terrified; do not be discouraged, for the LORD your God will be with you wherever you go."

I aint no perv, I am just a guy. haha

Good stuff brotha - Let me know if I can assist at all.

TEAM NICO: 137,000 Nissan enthusiasts strong.

NICOclub on Facebook

AZhitman on MySpace

Love it here? Add a link to NICOclub to your site!

This site dedicated to the memory of Stacey Lynn Childs 1970-2007

1) Learn how to read japanese and place an order online, and buy this:

http://www.wisecart.ne.jp/snapon/7.1/SIMGKW/

2) Learn how to make your own - getto version. Which is probably better, since...uh...at least I use a REAL snap-on keychain.

a) Buy a "stubby screwdriver" from Ebay. Make sure it's branded SNAP ON. But hurry! if you check ebay, you will see that most bidders are ricers like me. You don't understand how much competition I had bidding with guys like "acu-boy1" and "HondaPwns".

b) Put the screwdriver in a VISE, then using a mallet, tap the rubber part off. This is what you will use - discard the actual screwdriver.

c) Take your existing car key, put that in the VISE, and using a saw tool (I used a small circular saw...kinda looks like a dremel..but with a bigger wheel) and cut off everything about the key, except for the part that actually goes in the ignition slot.

d) Heat the remaining key up, then jam that sucker into the opening left on the SnapOn Screwdriver. Alt, you can place the key on a VISE, then place the rubber part on top of where the key end would go in - then tap from above with a mallet. Make sense?

e) Go to home depot - buy one of those rings that look like a question mark. Drill a small hole into the other end of the snapon rubber, then screw that ring in.

voila.

learn to bump.

jdmfreak: "One question. Are you down with the brown?"
nismo_freak: "She looks like a Fedex girl to me "

Alright, all jokes aside - I commend you for at least responding. I probably would have done the same thing - had I seen the same posts everywhere as well. However, what I failed to mention (and perhaps this is my bad), is that I actually requested this from a) This forum's mod, Eikon and b) Greg (AZhitman) himself.

Got it?

a) Randomly did a check for vert boot. Found it. Reaction: OMFG.
b) Snuck around my house, got my wallet, then scurried back into PC room.
c) Did the Buy It Now - and glee'ed happily as I felt I "1 up-ed" my fellow vert buddies.

d) Then realized I was a loser for feeling so gleeful - as my vert buddies, are online buddies. Sheesh.

ha, I'll take some pics when it gets here (should be tomorrow).

Gonna let it go for around $.....any buyers? I'll put a proper post up as well...

Modified by wirelessalpha at 12:25 AM 9/6/2006

Modified by wirelessalpha at 11:20 PM 10/15/2006

haha..

but your car is definitely hotness at the gate.

Quote, originally posted by audtatious »

Hey wait. My balls don't hang too low yet

S13 Auto -> Manual Swap / My 240SX / Convertible Top Replacement / Silvia Fog Light Wiring / DIY: SR20DET Rebuild
Stacey L. Childs, NICO Mom

We're gonna have to hang out - We'll be doing an event close to you in May 07.

Hope to see you guys soon!

1. Selling my nagisa rails...someone email me if you want them. I'll put a post up on the reg 4sale thread later. First dibs to vert guys though.

2. Waiting on my sparco rails (been a damn month already...sheesh), before I install my seats (which I have had for 4 months...sheesh).

3. Woah - looks like those boys at 240sxmotoring.com finally put my customer photos up (btw: and I don't work for them or have even personally met Jeff - but he is super cool and super friendly. Buy from this dude).

http://www.240sxmotoring.com/chipas13ve.html

Modified by wirelessalpha at 2:17 AM 11/7/2006

haha! I don't know how I came accross this thread but thought it was pretty funny to see my pic up on here =) I'm still filming if you're down to meet up. Let me know whats good email me, I don't get time to come on here that much.

1. Sal owns powerzam?
2. George - the red vert, is also an employee there?
3. You do all the photo work for them? Do you work there too?

sal and george own powerzamcam
david is in charge of marketing
huan is an employee

and myself, sal, george, david, huan and a few others will be driving for powerzamcam in '07!

Modified by zer013 at 9:54 PM 12/18/2006

Yea what he said...
You can say, I'm the goto guy when they want photos, video, and advertising materials like flyers banners, or whatever...
And we're building up my car right now so if all goes good I'll be running soon too.